2013-03-30, 14:47
Fedora 18
XMBC v12
vnsiserver 0.9.0 (Protocol 3)
vdr (1.7.31/1.7.31)
I'm stuck on this problem and would appreciate any suggestions. All live TV channels work fine except for two which have no audio. XMBC audio config screen shows that there are no streams available for these channels. My channels.conf shows two audio PIDs. Here is an example of one of the problematic channels:
250-3 CBLT-DT Toronto HD;(null):509000:M10:A:0:49=2:52=eng@4,53=es@4;52=@106,53=@106:0:0:3:0:0:0
I do get audio for this channel with Kaffeine or by using mplayer/streamdev. However, when I connect with XBMC, I see the following in the VDR logs:
Mar 30 06:13:03 mediahub1 vdr: [971] changing pids of channel 3 from 49+49=2:52=eng@4,53=es@4;52=@106,53=@106:0:0 to 49+49=2:0:0:0
Mar 30 06:13:03 mediahub1 vdr: [11285] changing pids of channel 3 from 49+49=2:52=eng@4,53=es@4;52=@106,53=@106:0:0 to 49+49=2:0:0:0
This only happens when vnsi-client switches to this channel. I've tweaked just about every setting I could find. I've also tried to cleared the sqllite dbase for the plugin config.
Any help would be appreciated.
XMBC v12
vnsiserver 0.9.0 (Protocol 3)
vdr (1.7.31/1.7.31)
I'm stuck on this problem and would appreciate any suggestions. All live TV channels work fine except for two which have no audio. XMBC audio config screen shows that there are no streams available for these channels. My channels.conf shows two audio PIDs. Here is an example of one of the problematic channels:
250-3 CBLT-DT Toronto HD;(null):509000:M10:A:0:49=2:52=eng@4,53=es@4;52=@106,53=@106:0:0:3:0:0:0
I do get audio for this channel with Kaffeine or by using mplayer/streamdev. However, when I connect with XBMC, I see the following in the VDR logs:
Mar 30 06:13:03 mediahub1 vdr: [971] changing pids of channel 3 from 49+49=2:52=eng@4,53=es@4;52=@106,53=@106:0:0 to 49+49=2:0:0:0
Mar 30 06:13:03 mediahub1 vdr: [11285] changing pids of channel 3 from 49+49=2:52=eng@4,53=es@4;52=@106,53=@106:0:0 to 49+49=2:0:0:0
This only happens when vnsi-client switches to this channel. I've tweaked just about every setting I could find. I've also tried to cleared the sqllite dbase for the plugin config.
Any help would be appreciated.