Yeah - it won't get better as that :-)
50fps @ 1080p is the bare maximum an E350 can do.
(2014-04-27, 22:15)kriticar Wrote: [ -> ]Hi,
I have just installed xubuntu 14.04, and followed the procedure described on the first page of this thread.
...
3. in my dual monitor setup with 23" lcd monitor and 42" Panasonic plasma (reported as "Panasonic 32"" in xcfe, btw motherboard e350, RAM 4 GB ), when playing xbmc on panasonic I don't see the whole picture. If I open firefox in full screen, I cannot se the file menu (the picture starts with Edit menu), and I cannot see the title bar. The same is with the bottom of the screen as well.
On panasonic, overscan is turned off. I read in the previous posts that xrandr could be used as a solution, but I haven't tried it yet.
The same setup works with no problem with xubuntu 12.04 and glrfx drivers.
I ought to admit that I have mistakenly reported this problem.
Someone in my house (I am still interrogating all of them in order to...
) has changed aspect ratio on the tv.
This problem existed only in my head. Sorry for misreporting.
Regards.
(2014-04-28, 00:20)locomot1f Wrote: [ -> ]@Endeavour, you are like me with the sensors.
for some reason ours is backwards -- the k10temp comes first. but the provided advancedsetting.xml is set for if the radeon-pci is first.
here's mine:
Code:
<cputempcommand>sensors|sed -ne '1h;1!H;${g;s/k10temp.*temp1: \+\([-+][0-9]\+\).*/\1 C/p}'</cputempcommand>
<gputempcommand>sensors|sed -ne '1h;1!H;${g;s/k10temp.*temp1: \+\([-+][0-9]\+\).*radeon.*/\1 C/p}'</gputempcommand>
Thank you. But this doesn't work anymore;;
Output below:
Code:
xbmc@boombox:~/testar$ sensors
radeon-pci-0008
Adapter: PCI adapter
temp1: +68.0°C (crit = +120.0°C, hyst = +90.0°C)
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +67.8°C (high = +70.0°C)
(crit = +100.0°C, hyst = +97.0°C)
xbmc@boombox:~/testar$ sensors|sed -ne '1h;1!H;${g;s/k10temp.*temp1: \+\([-+][0-9]\+\).*/\1 C/p}'
radeon-pci-0008
Adapter: PCI adapter
temp1: +68.0°C (crit = +120.0°C, hyst = +90.0°C)
+67 C
xbmc@boombox:~/testar$ sensors|sed -ne '1h;1!H;${g;s/k10temp.*temp1: \+\([-+][0-9]\+\).*radeon.*/\1 C/p}'
xbmc@boombox:~/testar$
Yeah, again a Denon that makes trouble:
Quote: [ 4555.409817] [drm:radeon_dvi_detect] *ERROR* HDMI-A-1: probed a monitor but no|invalid EDID
Head over to bugs.freedesktop.org please and try to file that bug accordingly. You can test my 3.14.2 kernel from some pages back.
(2014-04-29, 10:04)Endeavour79 Wrote: [ -> ] (2014-04-28, 00:20)locomot1f Wrote: [ -> ]@Endeavour, you are like me with the sensors.
for some reason ours is backwards -- the k10temp comes first. but the provided advancedsetting.xml is set for if the radeon-pci is first.
here's mine:
Code:
<cputempcommand>sensors|sed -ne '1h;1!H;${g;s/k10temp.*temp1: \+\([-+][0-9]\+\).*/\1 C/p}'</cputempcommand>
<gputempcommand>sensors|sed -ne '1h;1!H;${g;s/k10temp.*temp1: \+\([-+][0-9]\+\).*radeon.*/\1 C/p}'</gputempcommand>
Thank you. But this doesn't work anymore;;
Output below:
Code:
xbmc@boombox:~/testar$ sensors
radeon-pci-0008
Adapter: PCI adapter
temp1: +68.0°C (crit = +120.0°C, hyst = +90.0°C)
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +67.8°C (high = +70.0°C)
(crit = +100.0°C, hyst = +97.0°C)
xbmc@boombox:~/testar$ sensors|sed -ne '1h;1!H;${g;s/k10temp.*temp1: \+\([-+][0-9]\+\).*/\1 C/p}'
radeon-pci-0008
Adapter: PCI adapter
temp1: +68.0°C (crit = +120.0°C, hyst = +90.0°C)
+67 C
xbmc@boombox:~/testar$ sensors|sed -ne '1h;1!H;${g;s/k10temp.*temp1: \+\([-+][0-9]\+\).*radeon.*/\1 C/p}'
xbmc@boombox:~/testar$
Why not pass the argument to sensors ? I have the same problem. Not only that. It can't pick up the CPU temperature as well if I simply copy and paste the one in OP (there is an extra 'Temp' in my output)
jkl@xbmc:~$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +40.0°C (crit = +100.0°C)
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +33.0°C
Core1 Temp: +33.0°C
radeon-pci-0300
Adapter: PCI adapter
temp1: +34.5°C (crit = +120.0°C, hyst = +90.0°C)
jkl@xbmc:~$ sensors radeon-pci-0300
radeon-pci-0300
Adapter: PCI adapter
temp1: +35.0°C (crit = +120.0°C, hyst = +90.0°C)
jkl@xbmc:/home/xbmc$ sensors radeon-pci-0300|sed -ne "s/temp1: \+[-+]\([0-9]\+\).*/\1 C/p"
44 C
I use this one on my e350:
<cputempcommand>sensors k10temp-pci-00c3 | sed -ne "s/temp1: \+[-+]\([0-9]\+\).*/\1 C/p"</cputempcommand>
<gputempcommand>sensors radeon-pci-0008 | sed -ne "s/temp1: \+[-+]\([0-9]\+\).*/\1 C/p"</gputempcommand>
(2014-04-29, 13:05)fritsch Wrote: [ -> ]You can test my 3.14.2 kernel from some pages back.
Now i am on 3.14.2-amdfixes5+ and your marantz edid. Works fine after switching resolutions in XBMC interface.
Also a have a very noob question - any idea how to stop then start XBMC gently through SSH because my nettop using as Apple Time Machine, torrent-box and for power saving?
(2014-04-29, 13:35)Ectholian Wrote: [ -> ]I use this one on my e350:
<cputempcommand>sensors k10temp-pci-00c3 | sed -ne "s/temp1: \+[-+]\([0-9]\+\).*/\1 C/p"</cputempcommand>
<gputempcommand>sensors radeon-pci-0008 | sed -ne "s/temp1: \+[-+]\([0-9]\+\).*/\1 C/p"</gputempcommand>
i do like this better! much cleaner syntax!
well done
It's just a copy/paste from the first post; i only added the sensor parameters for cpu and gpu. A lot easier than trying to make a regex working for everything
how can i update to trusty?
Only with "sudo do release-upgrade" or is a fresh install better?
ppa-purge all the added repositories first
then do the release-upgrade
then readd the ppas and just run the first apt-get install command again.
New installation is simpler, yes.