Problem with XBMC after installed ATI driver version: 8.542 (catalyst 8.10) - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111) +---- Forum: Linux (https://forum.kodi.tv/forumdisplay.php?fid=52) +---- Thread: Problem with XBMC after installed ATI driver version: 8.542 (catalyst 8.10) (/showthread.php?tid=39191) |
- bexbier - 2008-11-04 what cant u find in xorg.conf ? dont know what u mean ;( disable compiz, go to system -> Desktop Effects -> Customization there set to NONE EFFECTS but this wouldnt help to fix your problem i think pulseaudio must be disabled in 8.10 else videos runs in xbmc fastforward take a look at this thread -> http://forum.xbmc.org/showthread.php?tid=39788 - bexbier - 2008-11-04 ok another idea, let us check which monitor is connected bex@bex-vdr:~$ aticonfig --query-monitor Connected monitors: tmds1 Enabled monitors: tmds1 so my monitor is called tmds1 when i want to set the resolution with the script i must edit it with my name from monitor, for example : Code: #!/bin/sh TODO:
good luck - soder - 2008-11-04 bexbier Wrote:ok another idea, let us check which monitor is connected I got Connected monitors: tmds2i Enabled monitors: tmds12i This is also what stands in my script. =( /Söder - soder - 2008-11-04 bexbier Wrote:what cant u find in xorg.conf ? dont know what u mean ;( What I mean was, WHERE does the script change things, or edit things. I cant se any differens in my xorg.conf after using the two methods, and therefor I guess they change something in a other file? /Söder - bexbier - 2008-11-04 in xorg.conf normaly ..... so thats i was confused about that script, but many people writes that its runs what says " aticonfig --query-dispattrib=tmds2i " ? - soder - 2008-11-04 bexbier Wrote:in xorg.conf normaly ..... so thats i was confused about that script, but many people writes that its runs Query monitors tmds2i ,Cap:0xff Supported adjustment type for tmds2i : brightness, contrast, saturation, hue, positionX, positionY, sizeX, sizeY brightness attribute information of monitor tmds2i : default:0, value:0, min:-100, max:100, step:1 contrast attribute information of monitor tmds2i : default:100, value:100, min:0, max:200, step:1 saturation attribute information of monitor tmds2i : default:100, value:100, min:0, max:200, step:1 hue attribute information of monitor tmds2i : default:0, value:0, min:-30, max:30, step:1 positionX attribute information of monitor tmds2i : default:51, value:51, min:0, max:1280, step:1 positionY attribute information of monitor tmds2i : default:28, value:28, min:0, max:720, step:1 sizeX attribute information of monitor tmds2i : default:1178, value:1178, min:640, max:1280, step:1 sizeY attribute information of monitor tmds2i : default:663, value:663, min:360, max:720, step:1 I guess this is fucked up? sizeX attribute information of monitor tmds2i : default:1178, value:1178, min:640, max:1280, step:1 sizeY attribute information of monitor tmds2i : default:663, value:663, min:360, max:720, step:1 /Söder - bexbier - 2008-11-04 yea i think too, try run the script with "sudo xinit -e name of script" i read that in a vdr forum - soder - 2008-11-04 bexbier Wrote:yea i think too, try run the script with "sudo xinit -e name of script" i read that in a vdr forum From ssh. htpc@htpc-desktop:~$ sudo xinit -e underscan.sh X: warning; process set to priority -1 instead of requested priority 0 Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. /Söder - bexbier - 2008-11-04 ok u must first stop the xserver with " sudo /etc/init.d/gdm stop" then run your script - soder - 2008-11-04 bexbier Wrote:ok u must first stop the xserver with " sudo /etc/init.d/gdm stop"First I tryed normal Same failure: htpc@htpc-desktop:~$ sudo ./underscan.sh Try to Set positionX adjust of monitor tmds2i value : 0 failed. It may not supported by monitor or the value beyond the range. Try to Set positionY adjust of monitor tmds2i value : 0 failed. It may not supported by monitor or the value beyond the range. Try to Set sizeX adjust of monitor tmds2i value : 1280 failed. It may not supported by monitor or the value beyond the range. Try to Set sizeY adjust of monitor tmds2i value : 720 failed. It may not supported by monitor or the value beyond the range. Then I tryed what your wrote. htpc@htpc-desktop:~$ sudo xinit -e underscan.sh X: warning; process set to priority -1 instead of requested priority 0 X.Org X Server 1.5.2 Release Date: 10 October 2008 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-19-server i686 Ubuntu Current Operating System: Linux htpc-desktop 2.6.27-7-generic #1 SMP Thu Oct 30 04:18:38 UTC 2008 i686 Build Date: 24 October 2008 08:00:16AM xorg-server 2:1.5.2-2ubuntu3 ([email protected]) Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 4 12:28:25 2008 (==) Using config file: "/etc/X11/xorg.conf" (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:1) found Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list! The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols > Ignoring extra symbols Errors from xkbcomp are not fatal to the X server waiting for X server to shut down /Söder - bexbier - 2008-11-04 its ok ..... when the xserver shuts down u can run the script - soder - 2008-11-04 soder Wrote:First I tryed normal Now restarted. Same underscan with not showing all menues and power-buttoms. xorg.conf: Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "Default Screen" 0 0 Option "AIGLX" "true" EndSection Section "Files" # path to defoma fonts FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" Load "i2c" Load "bitmap" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "de" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" EndSection Section "Monitor" Identifier "Configured Monitor" Option "VideoOverlay" "on" Option "OpenGLOverlay" "off" Option "DPMS" EndSection Section "Device" Identifier "Configured Video Device" Driver "fglrx" Option "EnableMonitor" "crt1,lvds,tv,tmds1,crt2,tmds2,cv,tmds2i" Option "TVOverscan" "true" Option "NoTV" "no" Option "BusType" "PCIE" BusID "PCI:1:5:0" EndSection Section "Screen" Identifier "Default Screen" Device "Configured Video Device" Monitor "Configured Monitor" DefaultDepth 24 SubSection "Display" # here edit resolution u want to display Viewport 0 0 Virtual 1280 720 Depth 24 EndSubSection EndSection Section "DRI" Mode 0666 EndSection Section "Extensions" Option "Composite" "Enable" EndSection - soder - 2008-11-04 bexbier Wrote:its ok ..... when the xserver shuts down u can run the script Aha, tryed again. sudo /etc/init.d/gdm stop sudo xinit -e underscan.sh htpc@htpc-desktop:~$ sudo ./underscan.sh Try to Set positionX adjust of monitor tmds2i value : 0 failed. It may not supported by monitor or the value beyond the range. Try to Set positionY adjust of monitor tmds2i value : 0 failed. It may not supported by monitor or the value beyond the range. Try to Set sizeX adjust of monitor tmds2i value : 1280 failed. It may not supported by monitor or the value beyond the range. Try to Set sizeY adjust of monitor tmds2i value : 720 failed. It may not supported by monitor or the value beyond the range. Still will not work? EDIT: BTW, I have to go too school soon. will be there for 4 hours. Modern Physics. Will you still help me when Im back? =) /Söder - bexbier - 2008-11-04 hmm u can erase this things from xorg.conf Option "TVOverscan" "true" Option "NoTV" "no" than .... i dont know .... no more ideas make a restart .... i think than u would see the buttons again if i will have a new idea i will tell ya - soder - 2008-11-04 bexbier Wrote:hmm What do you say about this. The person who gave me the script wrote this in another tread. " Strange, works for me - maybe you need the DPMS option on xorg.conf ? Section "Monitor" Identifier "Monitor0" VendorName "SEC" ModelName "4241" Option "DPMS" EndSection " /Söder |