Ubuntu 11.04, XBMC no audio - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111) +---- Forum: Linux (https://forum.kodi.tv/forumdisplay.php?fid=52) +---- Thread: Ubuntu 11.04, XBMC no audio (/showthread.php?tid=103563) |
Ubuntu 11.04, XBMC no audio - boludiko - 2011-06-15 Hi all, after upgrade the alsa drivers and configure my system with this: /etc/modprobe.d/sound.conf options snd-hda-intel model=6stack-dig /etc/asound.conf pcm.!default { type plug slave.pcm "dmixer" } pcm.dmixer { type dmix ipc_key 1024 ipc_key_add_uid false ipc_perm 0660 slave { pcm "hw:0,3" period_time 0 period_size 1024 buffer_size 4096 rate 48000 channels 2 } bindings { 0 0 1 1 } } ctl.dmixer { type hw card 0 } And change the file HDA-Intel.conf like this guide http://wiki.xbmc.org/index.php?title=HOW-TO_set_up_audio_over_HDMI_on_nVidia_GeForce/nForce_controller I have sound on all my system (Youtube sounds too in firefox) but on XBMC doesn't. My options on XBMC for sound configure are: HDMI, Analogic Output, Coaxial or Optical. How can i do? Thanks to all... Disable Pulseaudio - peter10000 - 2011-06-16 I think it´s the same problem like in the previous versions of ubuntu with pulseaudio. You must stop pulseaudio before starting XBMC. Command: pulseaudio -k You can put it in a start-script - it works perfect for me. At the end of script I startup pulseaudio - so when I end XBMC my sound works again for Ubuntu. Show the script - boludiko - 2011-06-16 Thanks for the answer, can you please show your script? Thanks! pulseaudio -k doesn't work - boludiko - 2011-06-16 Hi, i try to stop pulseaudio (pulseaudio -k) before launch xbmc but i doesn't work... i don't know what i have to do... - darkscout - 2011-06-16 What does your 'aplay -l' show? Just directly enter your sound sink as a 'other' in XBMC and be done with it. Aplay -L and -l - boludiko - 2011-06-16 This is the list, i try to add this on this way but doesn't work... aplay -l **** Lista de PLAYBACK dispositivos hardware **** tarjeta 0: NVidia [HDA NVidia], dispositivo 0: ALC888 Analog [ALC888 Analog] Subdispositivos: 1/1 Subdispositivo #0: subdevice #0 tarjeta 0: NVidia [HDA NVidia], dispositivo 1: ALC888 Digital [ALC888 Digital] Subdispositivos: 1/1 Subdispositivo #0: subdevice #0 tarjeta 0: NVidia [HDA NVidia], dispositivo 3: HDMI 0 [HDMI 0] Subdispositivos: 1/1 Subdispositivo #0: subdevice #0 aplay -L null Discard all samples (playback) or generate zero samples (capture) default:CARD=NVidia HDA NVidia, ALC888 Analog Default Audio Device front:CARD=NVidia,DEV=0 HDA NVidia, ALC888 Analog Front speakers surround40:CARD=NVidia,DEV=0 HDA NVidia, ALC888 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=NVidia,DEV=0 HDA NVidia, ALC888 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=NVidia,DEV=0 HDA NVidia, ALC888 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=NVidia,DEV=0 HDA NVidia, ALC888 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=NVidia,DEV=0 HDA NVidia, ALC888 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=NVidia,DEV=0 HDA NVidia, ALC888 Digital IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=NVidia,DEV=0 HDA NVidia, HDMI 0 HDMI Audio Output - Hudson_Hawk04 - 2011-06-17 does your system have sound? If not check to make sure you have the correct hardware selected ( you can select different configurations and test easily) also check to see if the sound is muted by the system. Yes i have sound. - boludiko - 2011-06-17 Yes i have sound in all my system, i can play mp3 with banshee, videos with vlc, mplayer, totem, videos on youtube with firefox, and the ubuntu system sound too... The only problem is with xbmc.... - darkscout - 2011-06-17 From the command line. What does Code: speaker-test -D plughw:0,3 -c 2 do? |