![]() |
|
ANTEC ISK300-65's hidden PSU Spec - Printable Version +- XBMC Community Forum (http://forum.xbmc.org) +-- Forum: Off-Topic (/forumdisplay.php?fid=34) +--- Forum: Hardware for XBMC (/forumdisplay.php?fid=112) +--- Thread: ANTEC ISK300-65's hidden PSU Spec (/showthread.php?tid=114659) |
RE: ANTEC ISK300-65's hidden PSU Spec - legiong - 2012-04-13 16:00 lol, just pm'd you basically the same thing. where is it for $36? amazon is telling me $49.95 + $9 delivery. RE: ANTEC ISK300-65's hidden PSU Spec - bluray - 2012-04-13 16:23 If you cut a circular hole in the case cover, you might be able to fit this chrome passive CUP cooler- Nofan CR-95C IcePipe 95W Fanless CPU Cooler....... ![]() It'll get your visitor attention for sure! RE: ANTEC ISK300-65's hidden PSU Spec - legiong - 2012-04-13 17:05 That would look awesome sticking out the side, it might throw it a little off balance though, lol! RE: ANTEC ISK300-65's hidden PSU Spec - OopsAllBerrys - 2012-04-13 19:00 i got a isk300-65 with a asrock a75m-itx and amd 3850. I bought the 135w a/c adapter from the first link. Hooked everything up and I am getting constant restarts and the machine doesnt even POST. I had an extra ATX power supply laying around so i disconnected the DC-DC board inside and hooked up the ATX power supply directly to the mobo. Everything fires right up and works. So it must be a power issue.... anyone have any recommendations? RE: ANTEC ISK300-65's hidden PSU Spec - bluray - 2012-04-13 19:16 (2012-04-13 19:00)OopsAllBerrys Wrote: i got a isk300-65 with a asrock a75m-itx and amd 3850. I bought the 135w a/c adapter from the first link. Hooked everything up and I am getting constant restarts and the machine doesnt even POST. I had an extra ATX power supply laying around so i disconnected the DC-DC board inside and hooked up the ATX power supply directly to the mobo. Everything fires right up and works. So it must be a power issue.... anyone have any recommendations?Welcome to the forum...! That is why I don't like to mess around with other alternative other than the standard ATX PSU......you can get a silent fanless ATX PSU too- SeaSonic X series SS-400FL Active PFC F3 400W ATX12V Fanless 80 PLUS GOLD Certified Modular Active PFC Power Supply RE: ANTEC ISK300-65's hidden PSU Spec - OopsAllBerrys - 2012-04-13 19:19 (2012-04-13 19:16)bluray Wrote:(2012-04-13 19:00)OopsAllBerrys Wrote: i got a isk300-65 with a asrock a75m-itx and amd 3850. I bought the 135w a/c adapter from the first link. Hooked everything up and I am getting constant restarts and the machine doesnt even POST. I had an extra ATX power supply laying around so i disconnected the DC-DC board inside and hooked up the ATX power supply directly to the mobo. Everything fires right up and works. So it must be a power issue.... anyone have any recommendations?Welcome to the forum...! thanks, i thought i was a member as i've been using xbmc since it was xbox media center but maybe they redid the user registration since then. Well i cant use a regular ATX PSU, it wont fit in the isk300-65 case! i was only using a regular PSU to see what the problem was. RE: ANTEC ISK300-65's hidden PSU Spec - eskro - 2012-04-13 22:09 you shouldnt have problems, the 135w brick you bought has all correct specs. probably a bad unit. rma RE: ANTEC ISK300-65's hidden PSU Spec - waver123 - 2012-04-19 06:07 went browsing @ microcenter and saw a "shuriken rev B"....couldn't resist and pick one up for comparison. Here's my current isk-100 case with the stock hs, it barely clears after I removed the case fan. ![]() isk-100 + shuriken rev B, woah! ![]() LOL it sticks out pretty bad ![]() stock ![]() shruken type b ![]() big shruken ![]() went into image limit.....here's the comparison pic ![]() ![]() the 3 stooges
RE: ANTEC ISK300-65's hidden PSU Spec - Beer40oz - 2012-04-19 06:20 Sweetness.... So shuriken2 V.B Fits... woah!!!! hey what is the other? I thought you already had the V.B as I do... I'm sorry I just read... the non- B version.... this one right? http://www.newegg.com/Product/Product.aspx?Item=N82E16835185129 So are you happy now? it should keep the temps down.... by itself... RE: ANTEC ISK300-65's hidden PSU Spec - waver123 - 2012-04-19 06:35 @beer, that was just shuriken Rev.B I bought the shuriken 2 earlier (the big one). Neither of which I can close the case even after I remove the fan hah. Right now I just use the stock HS and tune down the fan, it's actually not too bad. Time to move these to the ISK300! this is the one http://www.newegg.com/Product/Product.aspx?Item=N82E16835185097 |