No SMB share after update - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111) +---- Forum: iOS & tvOS (https://forum.kodi.tv/forumdisplay.php?fid=137) +---- Thread: No SMB share after update (/showthread.php?tid=124622) Pages:
1
2
|
No SMB share after update - derdude - 2012-03-04 Hi, I've been runnung the 'old' XBMC version Dharma for a long time without problems. The media files are stored on a NAS (Conceptronics CH3SNAS) . Yesterday I decided to update to XBMC version 11.0-RC1. Unfortunately now I'm in trouble cause XBMC cannot find my SMB-share anymore. I tested the share with a mobile phone app and it worked fine. Then I edited the XBMC sources.xml with the correct values and got an "Operation timed out" error. Log file Any suggestion to solve it? Cheers, derdude - Memphiz - 2012-03-04 Try to use the ip instead of the netbios name. Und niemals bist du der dude. Es gibt nur einen dude! - derdude - 2012-03-04 Now I tried to set the IP address instead in sources.xml. In XBMC I choose the share and the dialog "Einstellungen sperren" appears and forced me to set user and password (which were already set in the sourcel.xml). After set user/pwd I clicked 'ok' and the same dialog appears again . Very strange.... Could someome send me an example of sources.xml? @Memphiz: Du hast mich ertappt. Aber "White Russian" trinke ich auch ganz gern. Cheers, derdude - Maetrik - 2012-03-04 Show me yours, i'll show you mine Just kidding, it should look like Code: <video> - derdude - 2012-03-04 My settings look similar. Cause xbmc cannot See my share in the GUI, there might be another issue when running xbmc with my NAS. This eden-version drives me crazy. But I don't give up. Cheers, derdude - Memphiz - 2012-03-05 As so often its all about good network and server configuration. Once this is garantied xbmc starts working like a champ... - derdude - 2012-03-05 Memphiz Wrote:As so often its all about good network and server configuration. Once this is garantied xbmc starts working like a champ... I also think, that's the key. But the strange thing is, that the share works with other devices. The update from Dharma to Eden was made by NitoTV. Maybe a config-file was not updated or something like that. I think I update again from command line. Will this update the hole xbmc or should I delete xbmc manually before an update/install? Cheers, derdude - jpcolin - 2012-03-05 Memphiz Wrote:As so often its all about good network and server configuration. Once this is garantied xbmc starts working like a champ... Memphiz, Do you have a guide or something on how to make a good (the best) network and server configuration for XBMC? Are there some tricks or tips? I have a Synology NAS with SMB. It works quite good but maybe it could be better sincei did not configure anything ;-) - Memphiz - 2012-03-05 provide a new log with enabled debug option this time... - notable17 - 2012-03-05 jpcolin Wrote:Memphiz,I had the same issue when I upgraded my atv2 to beta versions of Eden. The problem still persists today and I'm at RC2. My windows 7 XBMC works like a champ on the same "open" shares. Open meaning they are not password protected. I found a workaround by adding my smb sources manually but I used to be able to browse them. The format used for the manual share: smb://server_name_here_not_IP Works well after initial setup. - derdude - 2012-03-05 notable17 Wrote:I had the same issue when I upgraded my atv2 to beta versions of Eden. The problem still persists today and I'm at RC2. My windows 7 XBMC works like a champ on the same "open" shares. Open meaning they are not password protected. I found a workaround by adding my smb sources manually but I used to be able to browse them. The format used for the manual share: smb://server_name_here_not_IP Works well after initial setup. Unfortunately I cannot disable the password for SMB share in the NAS GUI. There always has to a user with password which can then use the share. At the moment I use UPNP to make XBMC work before my wife kills me . But besides that I'll keep on to find out the Share-problem. @Memphiz: Tomorrow I'll send a debug-log. Thanks for your patience. Cheers, derdude - notable17 - 2012-03-06 derdude Wrote:Unfortunately I cannot disable the password for SMB share in the NAS GUI. There always has to a user with password which can then use the share.You could try the following: smb://username : password@machinename/ omit the spaces around the colon. I had to add them in order to avoid turning the "p" and colon into an emoticon I haven't tried it but it's worth a try. - Memphiz - 2012-03-06 notable17 Wrote:You could try the following: smb://username : password@machinename/ just fyi - you can turn off emoticons when posting - just check the checkbox "disable smilies in text" - derdude - 2012-03-06 Yesterday night I searched for SMB share problems for my NAS. It seems to be, that - as notable17 mentioned, some programs cannot handle password protected SMB shares. I assume that this is also the case in XBMC (Eden). Later I downgraded to Dharma and now the SMB share works fine again... Could someone have a look at the SMB implementation of XBMC? Unfortunately I haven't made a debug log last night. But if it it strongly needed, I could install Eden again and make a log file. But this may take a while (eventually next weekend). Cheers, derdude - Memphiz - 2012-03-06 Yeah its strongly needed. I'm using password protected samba shares without an issue. Samba server 3.xx is running on my nas and i configured the server on my own. (as more as i read of samba nas problems i don't trust any oft these manufacturers anymore...) PS: looked at the smb implementation ... looks fine |