Linux [TVHeadEnd] Record two channels at once ? - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: PVR & Live TV Support (https://forum.kodi.tv/forumdisplay.php?fid=167) +---- Forum: Tvheadend (https://forum.kodi.tv/forumdisplay.php?fid=168) +---- Thread: Linux [TVHeadEnd] Record two channels at once ? (/showthread.php?tid=127829) |
[TVHeadEnd] Record two channels at once ? - LastCoder - 2012-04-05 Hi, I have atm a single DVB-S2 tuner card. Recording one channel and watching another one on the same transponder works ! BUT if I record one channel, switch to the other on the same transponder and press "Record" again it obviously stops recording the first .. is it a bug or a feature ? I guess if I could watch a channel it should be possible to record it .. What are your experiences, possibly with other backends ? How does it work with a multituner setup ? Greetz LastCoder PS: what I miss - if a channel is recoreded it would be nice if the channelslist would only show the really available channels like the satellite recievers do ... RE: [TVHeadEnd] Record two channels at once ? - xxxnelly - 2012-04-05 (2012-04-05, 10:18)LastCoder Wrote: I have atm a single DVB-S2 tuner card. I have one DVB-T tuner and a Dual DVB-S2 tuner. I can record multiple channels at once, so I don't really check to see what tuner it is using. I agree it would be nice to see that list somehow - how do another satellite recievers do it? I haven't used a Sky-HD box for a while... RE: [TVHeadEnd] Record two channels at once ? - LastCoder - 2012-04-07 xxxnelly Wrote:have one DVB-T tuner and a Dual DVB-S2 tuner. I can record multiple channels at once, so I don't really check to see what tuner it is using. Have you tried different ways like timer or instant recording ? I tried it with timer recording too - and it didn't work :-( xxxnelly Wrote:I agree it would be nice to see that list somehow - how do another satellite recievers do it? I haven't used a Sky-HD box for a while... My sat-receivers simply cut the channels list to what is available. If you press "channels" or simply switch through the list with +/- there are only these channels that are accessible. .. I guess it would require some tv backend work to enable it .. Any ideas if VDR or MythTV master that task ? Greetz LastCoder |