help setting up hauppauge 2250 in XBMCbuntu 12.04 - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: PVR & Live TV Support (https://forum.kodi.tv/forumdisplay.php?fid=167) +--- Thread: help setting up hauppauge 2250 in XBMCbuntu 12.04 (/showthread.php?tid=140909) |
help setting up hauppauge 2250 in XBMCbuntu 12.04 - cank - 2012-09-20 I am trying to get my system going with a TV Tuner so I did a clean install of V2 http://forum.xbmc.org/showthread.php?tid=134252&highlight=%22xbmcbuntu+12.04+alpha%22 and installed tvheadend but my card is not listed as a tv adapter. What steps do I need to take to trouble shoot this? After a lot of searching I can't find anything that works and I'm a linux noob so some (a lot) is foreign to me. most of what I found is years old and it seems my card should work out of the box with the newer version of ubuntu in this build Thanks for any pointers RE: help setting up hauppauge 2250 in XBMCbuntu 12.04 - opdenkamp - 2012-09-20 drivers should be included indeed. but you need a firmware for it to work properly on linux which probably isn't included: http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-2250 RE: help setting up hauppauge 2250 in XBMCbuntu 12.04 - guitarguy987 - 2012-09-20 dushmaniac is correct, you need the firmware for the 2250, available HERE. You will need to copy this file as root to the following folder on your local machine: \lib\firmware\{KERNEL VERSION} (ie I'm running kernel 3.2.0-29-generic, so the path to my firmware is \lib\firmware\3.2.0-29-generic\NXP7164-2010-03-10.1.fw). You can find out your kernel version by typing 'uname -r' (without quotes). Once your firmware is copied to this directory, reboot your machine. Then to see if it's loaded correctly, type 'dmesg | grep saa' and make sure you see 'firmware loaded'. Once you see the firmware loaded, you should be good to go. I use MythTV, not TVheadend, so I can't help you any further than that. Oh, and BTW, if ever you do an dist-upgrade that upgrades your kernel, don't forget to copy the firmware into the new kernel directory!! I've spent a few hours ripping whats left of my hair out because of that. Good luck. RE: help setting up hauppauge 2250 in XBMCbuntu 12.04 - cank - 2012-09-21 Thanks, I got the card to show up! Now just to figure out tvheadend. RE: help setting up hauppauge 2250 in XBMCbuntu 12.04 - douglasdouglasj - 2014-05-14 I'm running Gotham, and just installed a 2250 in my xbmc box. For some reason, the tuner card isn't detected, so I installed this firmware. After rebooting, no change. I checked dmesg | grep saa, and got absolutely nothing, no output. I got the web interface for tvheadend to show up, and still under input cards, no cards listed. I checked lspci, no tuner listed. I'm positive the card is firmly seated, and I can't figure out why this card wont detect. Im about ready to do a fresh install at this point. I'm running xbmcbuntu 13.0, 3.5.0-49. |