(2013-03-28, 21:08)htpcforall Wrote: @theINSKIIP

No problem. You're welcome. You don't have to do anything except put the .xml file in your userdata folder. XBMC looks for this automatically. The rules you put in the advancedsettings.xml will supersede all other settings. Just to be sure that XBMC is accepting your settings, you can exe XBMC, then exit. After that, open your log file. You should find some lines that clearly state that the xml has been read. You will also see an error right after that if XBMC had any problem with the file. Let me know how it works. Another easy way to tell is to change the value of the algorithmdirtyregions to 1 instead of 3. When I do this the UI in XBMC goes nutty. Good luck. Please let me know.

htpcforall

(2013-04-02, 08:37)who cares Wrote:

(2013-04-01, 12:59)Tommy297 Wrote: Please help,I have bought product sonline ATV1200 but I can not connect to my TV to the AV port while connected to HDMI, is normal, please help me, I have to adjust the OutputMode 480p but still can not connect. in CVBS / YUV only YUV without CVBS, I use version 4.1.2 you can see Figure , sorry my bad English,i'm form vietnam,i'm just upgrade firmware 130326 but can't select CVBS or YUV,i want to restore fimware 2012 maybe support CVBS,plz help me ! , sorry my bad English,i'm form vietnam
http://i463.photobucket.com/albums/qq358/Tommy297/IMG_0762.jpg
http://i463.photobucket.com/albums/qq358/Tommy297/IMG_0761.jpg

Sent from my iPhone

you need to change the output mode to 480i(NTSC) or 576i(PAL), then you will see CVBS option in setting->dispay->CVBS/YUV , select CVBS and you will get AV output on TV.

(2013-03-30, 10:37)who cares Wrote: www.geniatech.com/down-eng/androidtvbox/update_spi_mx_20130326.zip SPI
www.geniatech.com/down-eng/androidtvbox/update_MX_20130326.zip Firmware
Downlload and don't unzip, copy to SD card or USB disk, connect to the box and run upgrade->local update, select the SPI file to update first, after finished, it will restart the box, then, do the same steps to update the firmware, and XBMC is still xbmcapp-armeabi-v7a-debug-20130223.apk.

Above is a new firmware for Geniatech's dual core box, it fixed 4:3/16:9 aspect ratio and android bar problems of XBMC.

(2013-04-03, 12:35)mrwilson251 Wrote: i'm having trouble updating to 20130326 I followed the instructions from here

http://www.geniatech.com/news/mx-atv1200-atv520-android-4.1-20130115-upgrading-instruction.asp

my current version is 20130115

i downloaded the 2 updates from who cares post
changed the extensions from.zip to .img

I do the local upgrade for the spi one first, but when it reboots it doesn't do the upgrade
it says upgrade failed
then from the boot menu I try to apply update manually but it doesn't see my usb stick
tried another usb stick to make sure it wasn't the stick but same problem
also did a factory reset but same problem

its reading the usb stick ok in android

anybody any ideas?

(2013-04-03, 13:21)theINSKIP Wrote:

(2013-04-03, 12:35)mrwilson251 Wrote: i'm having trouble updating to 20130326 I followed the instructions from here

http://www.geniatech.com/news/mx-atv1200-atv520-android-4.1-20130115-upgrading-instruction.asp

my current version is 20130115

i downloaded the 2 updates from who cares post
changed the extensions from.zip to .img

I do the local upgrade for the spi one first, but when it reboots it doesn't do the upgrade
it says upgrade failed
then from the boot menu I try to apply update manually but it doesn't see my usb stick
tried another usb stick to make sure it wasn't the stick but same problem
also did a factory reset but same problem

its reading the usb stick ok in android

anybody any ideas?

Try doing it without changing the extension. I left it as .zip and it worked fine.

(2013-04-03, 12:35)mrwilson251 Wrote: I do the local upgrade for the spi one first, but when it reboots it doesn't do the upgrade
it says upgrade failed

(2013-04-03, 16:05)mai62 Wrote:

(2013-04-03, 12:35)mrwilson251 Wrote: I do the local upgrade for the spi one first, but when it reboots it doesn't do the upgrade
it says upgrade failed

I had the same thing with 16 Gb SD-card. Then I used a 4 Gb SD card and USB reader and the update went well.

(2013-04-03, 19:26)dmartins13 Wrote: So I updated to latest firmware (the chinese one) and installed xbmcapp-armeabi-v7a-debug-2013-03-03-full-neon-xaf-set_top-3ebaf29c3f8c60d761e49c57312c60d82fe9391c

This seems to work pretty nicely. No aspect problems, streams are ok especially off freeprojecttv.

(2013-03-30, 10:37)who cares Wrote: www.geniatech.com/down-eng/androidtvbox/update_spi_mx_20130326.zip SPI
www.geniatech.com/down-eng/androidtvbox/update_MX_20130326.zip Firmware
Downlload and don't unzip, copy to SD card or USB disk, connect to the box and run upgrade->local update, select the SPI file to update first, after finished, it will restart the box, then, do the same steps to update the firmware, and XBMC is still xbmcapp-armeabi-v7a-debug-20130223.apk.

Above is a new firmware for Geniatech's dual core box, it fixed 4:3/16:9 aspect ratio and android bar problems of XBMC.

(2013-04-04, 08:24)jalterach Wrote:

(2013-04-03, 19:26)dmartins13 Wrote: So I updated to latest firmware (the chinese one) and installed xbmcapp-armeabi-v7a-debug-2013-03-03-full-neon-xaf-set_top-3ebaf29c3f8c60d761e49c57312c60d82fe9391c

This seems to work pretty nicely. No aspect problems, streams are ok especially off freeprojecttv.

But, how do you use xbmcapp-armeabi-v7a-debug-2013-03-03-full-neon-xaf-set_top with video hardware acceleration in atv1200 ?
Please, link to the chinese firmware are you using.

Thanks
julio

(2013-04-04, 19:02)dmartins13 Wrote:

(2013-04-04, 08:24)jalterach Wrote: But, how do you use xbmcapp-armeabi-v7a-debug-2013-03-03-full-neon-xaf-set_top with video hardware acceleration in atv1200 ?
Please, link to the chinese firmware are you using.

http://up.stdvr.com/mygica/android/A6/firmware/
i just installed that firmware then the xbmc I mentioned. I'm sure there is a new nightly build though.

Still getting flickering but I think that's the box.

(2013-04-04, 14:22)dgcruzing Wrote:

(2013-03-30, 10:37)who cares Wrote: www.geniatech.com/down-eng/androidtvbox/update_spi_mx_20130326.zip SPI
www.geniatech.com/down-eng/androidtvbox/update_MX_20130326.zip Firmware
Downlload and don't unzip, copy to SD card or USB disk, connect to the box and run upgrade->local update, select the SPI file to update first, after finished, it will restart the box, then, do the same steps to update the firmware, and XBMC is still xbmcapp-armeabi-v7a-debug-20130223.apk.

Above is a new firmware for Geniatech's dual core box, it fixed 4:3/16:9 aspect ratio and android bar problems of XBMC.

Upgraded to this one today.. Working smoothly.
Haven't had time to play with XBMC builds on it but was streaming off PPTV most of the day..
Not sure if it was the box or the network.. Seemed to encounter the ethernet problem after about 2 hours where the stream was caught up.
Switched out to wifi and ran the same stream for a while.. Then switched back to ethernet and no problems.. Maybe a net problem and or that old bug is still hanging round..
Overall zippy as hell but I am also running the Seeder app to keep the Random Entropy up to 4096.
We can clock up to 1512mhz and change out to performance governor but min seems to be locked in at 48mhz which seems a bit low.
But with that being said.. It shows that it actually sits down between 72mhz & 336mhz on low loads.

Navigation buttons are back plus a new screen shot one..
I also noticed in settings there is a new EASYLINK option.. Maybe some like a new remote control app or airplay?
Anyone got info on it?

(2013-04-02, 12:40)Tommy297 Wrote:

(2013-04-02, 08:37)who cares Wrote:

(2013-04-01, 12:59)Tommy297 Wrote: Please help,I have bought product sonline ATV1200 but I can not connect to my TV to the AV port while connected to HDMI, is normal, please help me, I have to adjust the OutputMode 480p but still can not connect. in CVBS / YUV only YUV without CVBS, I use version 4.1.2 you can see Figure , sorry my bad English,i'm form vietnam,i'm just upgrade firmware 130326 but can't select CVBS or YUV,i want to restore fimware 2012 maybe support CVBS,plz help me ! , sorry my bad English,i'm form vietnam
http://i463.photobucket.com/albums/qq358/Tommy297/IMG_0762.jpg
http://i463.photobucket.com/albums/qq358/Tommy297/IMG_0761.jpg

Sent from my iPhone

you need to change the output mode to 480i(NTSC) or 576i(PAL), then you will see CVBS option in setting->dispay->CVBS/YUV , select CVBS and you will get AV output on TV.

Thank for help but i can change 480i and 576p but i can't choice CVBS and YUV,i mean only choose YUV :-( , see my pic hix
http://i463.photobucket.com/albums/qq358/Tommy297/null-1.jpg
http://i463.photobucket.com/albums/qq358/Tommy297/null.jpg