+- Kodi Community Forum (https://forum.kodi.tv)
+-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33)
+--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111)
+---- Forum: Linux (https://forum.kodi.tv/forumdisplay.php?fid=52)
+---- Thread: New OpenELEC box, a few problems (/showthread.php?tid=150749)
Pages:
1
2
New OpenELEC box, a few problems - Billzilla - 2013-01-04
Just managed to get my new OpenELEC box working this morning and it's mostly fine but I don't know much about how to set up the tricky stuff and I'm having problems.
The hardware is -
Motherboard - ASRock H77M ITX
CPU - Intel CORE i3 3220
RAM - 8gb
SSD - SanDisk 64G SSD
Tuner video card - Hauppauge HVR-2210
The two main problems at the moment are that I don't think OE is detecting the Hauppauge TV card as I can't get any live TV working (antenna is plugged in) and there's no sound.
No idea how to make the TV card work, I need big help with that please. I've installed the PVR front end thingies but they don't work because the TV card isn't working.
With the sound, it's set for HDMI (using an HDMI cable from the motherboard output to the telly) and everything appears to be set otherwise correctly. But there's no sound at all.
Help please!!!
Edit - I'm using OpenELEC 2.0 generic
RE: New OpenELEC box, a few problems - nickr - 2013-01-05
For PVR functionality you need to have a recording backend like tvheadend or mythtv.
What is your audio output device set to?
RE: New OpenELEC box, a few problems - Billzilla - 2013-01-05
(2013-01-05, 00:38)nickr Wrote: For PVR functionality you need to have a recording backend like tvheadend or mythtv.
What is your audio output device set to?
Okay fixed the audio but the PVR stuff still isn't working.
Got tvheadend installed and running, and also mediaportal but that keeps on popping up error messages (Communication Error, that sound right?)
In the set-up section where there's a line for 'scanning channels', that is greyed-out so it can't be selected.
Now using OpenELEC 3.0 (RC 1)
RE: New OpenELEC box, a few problems - Billzilla - 2013-01-05
I've found why it's not working, the answer is (mostly) here -
http://wiki.xbmc.org/index.php?title=PVR/Backend/Tvheadend
When I open my browser to http://192.168.0.12:9981/extjs.html the page for setting it up loads just fine but the TV ADAPTERS box is blank.
I've got no idea how to fix that, despite doing a bit more reading.
Heeeeeelllp!
RE: New OpenELEC box, a few problems - Billzilla - 2013-01-05
On advice from the OpenELEC forum I used Putty to get some information. Here it is ...
[ 14.509355] tveeprom 9-0000: Hauppauge model 89009, rev D3F2, serial# 795782
[ 14.509357] tveeprom 9-0000: MAC address is 00:0d:fe:79:6d:3c
[ 14.509358] tveeprom 9-0000: tuner model is NXP 18271C2_716x (idx 152, type )
[ 14.509360] tveeprom 9-0000: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L' PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[ 14.509361] tveeprom 9-0000: audio processor is SAA7164 (idx 43)
[ 14.509362] tveeprom 9-0000: decoder processor is SAA7164 (idx 40)
[ 14.509363] tveeprom 9-0000: has radio, has IR receiver, has no IR transmittr
[ 14.509364] saa7164[0]: Warning: Unknown Hauppauge model #89009
[ 14.509364] saa7164[0]: Hauppauge eeprom: model=89009
[ 14.566970] tda18271 10-0060: creating new instance
[ 14.571824] TDA18271HD/C2 detected @ 10-0060
[ 14.810580] DVB: registering new adapter (saa7164)
[ 14.810583] DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)...
[ 14.841271] tda18271 11-0060: creating new instance
[ 14.846049] TDA18271HD/C2 detected @ 11-0060
[ 15.079816] tda18271: performing RF tracking filter calibration
[ 17.369684] tda18271: RF tracking filter calibration complete
[ 17.370024] DVB: registering new adapter (saa7164)
[ 17.370027] DVB: registering adapter 1 frontend 0 (NXP TDA10048HN DVB-T)...
[ 1246.273551] nvidia: module license 'NVIDIA' taints kernel.
[ 1246.273554] Disabling lock debugging due to kernel taint
[ 1246.279834] NVRM: No NVIDIA graphics adapter found!
[ 1280.970521] NVRM: No NVIDIA graphics adapter found!
[ 2427.298447] hda-intel: Unstable LPIB (65496 >= 4368); disabling LPIB delay cunting
[ 2477.795319] NVRM: No NVIDIA graphics adapter found!
[ 2489.742353] NVRM: No NVIDIA graphics adapter found!
root ~ # [ 1.352707] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
-sh: [: missing `]'
root ~ # [ 1.352732] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7c17000
-sh: [: missing `]'
root ~ # [ 1.361965] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
-sh: [: missing `]'
root ~ # [ 1.362086] hub 2-0:1.0: USB hub found
-sh: [: missing `]'
root ~ # [ 1.362088] hub 2-0:1.0: 2 ports detected
-sh: [: missing `]'
root ~ # [ 1.362118] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
-sh: syntax error near unexpected token `('
root ~ # [ 1.362124] uhci_hcd: USB Universal Host Controller Interface driver
-sh: [: missing `]'
root ~ # [ 1.362134] Initializing USB Mass Storage driver...
-sh: [: missing `]'
root ~ # [ 1.362145] usbcore: registered new interface driver usb-storage
[ 1.364720] rtc_cmos 00-sh: [: missing `]':
06: rtc core: registered rtc_cmos as rtc0
root ~ # [ 1.362145] USB Mass Storage support registered.
-sh: [: missing `]'[ 1.36
5381] cpuidle: using governor ladder
root ~ # [ 1.362173] i8042: PNP: No PS/2 controller found. Probing ports directly.
-sh: [: missing `]'
root ~ # [ 1.364472] serio: i8042 KBD port at 0x60,0x64 irq 1
-sh: [: missing `]'
root ~ # [ 1.364476] serio: i8042 AUX port at 0x60,0x64 irq 12
-sh: [: missing `]'
root ~ # [ 1.364520] mousedev: PS/2 mouse device common for all mice
-sh: [: missing `]'
root ~ # [ 1.364624] rtc_cmos 00:06: RTC can wake from S4
-sh: [: missing `]'
root ~ # [ 1.364720] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
-sh: [: missing `]'
root ~ # [ 1.364755] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
-sh: [: missing `]'
root ~ # [ 1.364760] i2c /dev entries driver
-sh: [: missing `]'
root ~ # [ 1.364877] ACPI Warning: 0x0000f040-0x0000f05f SystemIO conflicts with Regin \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
-sh: syntax error near unexpected token `('
root ~ # [ 1.364881] ACPI: If an ACPI driver is available for this device, you shoulduse it instead of the native driver
-sh: [: missing `]'
root ~ # [ 1.364950] w83627ehf: Found NCT6776F chip at 0x290
[ 1.655426] ata5: SATA link down (SStatus 0 SControl 300)
-sh: [: missing `]'
root ~ # [ 1.365381] cpuidle: using governor ladder
-sh: [: missing `]'
root ~ # [ 1.365429] cpuidle: using governor menu
[ 1.655871] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out
-sh: [: missing `]'
root ~ # [ 1.365429] EFI Variables Facility v0.08 2004-May-17
-sh: [: missing `]'
root ~ # [ 1.365431] No iBFT detected.
-sh: [: missing `]'
root ~ # [ 1.365525] usbcore: registered new interface driver usbhid
[ 1.656912] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out
-sh: [: missing `]'
root ~ # [ 1.365526] usbhid: USB HID core driver
-sh: [: missing `]'
root ~ # [ 1.365553] GACT probability on
-sh: [: missing `]'
root ~ # [ 1.365554] Mirror/redirect action on
-sh: [: missing `]'
root ~ # [ 1.365604] netem: version 1.3
-sh: [: missing `]'
root ~ # [ 1.365605] u32 classifier
-sh: [: missing `]'
root ~ # [ 1.365606] Performance counters on
-sh: [: missing `]'
root ~ # [ 1.365607] Actions configured
-sh: [: missing `]'
root ~ # [ 1.365609] Netfilter messages via NETLINK v0.30.
-sh: [: missing `]'
root ~ # [ 1.365615] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
-sh: syntax error near unexpected token `('
root ~ # [ 1.365689] ctnetlink v0.93: registering with nfnetlink.
[ 1.657568] ACPI: Invalid Power Resource to -sh: [: missing `]'r
egister!
root ~ # [ 1.365722] TCP: cubic registered
[ -sh: [: missing `]'
1.663412] uvesafb: Intel Corporation, Intel® Sandybridge/Ivybridge Graphcs Controller, root ~ # [ 1.365770] NET: Registered protocol family 10
-sh: [: missing `]'
root ~ # [ 1.365930] NET: Registered protocol family 17
-sh: [: missing `]'
root ~ # [ 1.365965] lib80211: common routines for IEEE802.11 drivers
-sh: [: missing `]'
root ~ # [ 1.365966] lib80211_crypt: registered algorithm 'NULL'
[ 2.009422] hub-sh: [: missing `]'
2-1:1.0: 8 ports detected
root ~ # [ 1.365970] Key type dns_resolver registered
-sh: [: missing `]'
root ~ # [ 1.366067] Using IPI No-Shortcut mode
-sh: [: missing `]'
root ~ # [ 1.366555] rtc_cmos 00:06: setting system clock to 2013-01-05 11:14:23 UTC 1357384463)
-sh: syntax error near unexpected token `)'
root ~ # [ 1.655320] ata2: SATA link down (SStatus 0 SControl 300)
-sh: syntax error near unexpected token `('
root ~ # [ 1.655367] ata4: SATA link down (SStatus 0 SControl 300)
-sh: syntax error near unexpected token `('
root ~ # [ 1.655386] usb 1-1: new high-speed USB device number 2 using ehci_hcd
-sh: [: missing `]'
root ~ # [ 1.655389] ata3: SATA link down (SStatus 0 SControl 300)
-sh: syntax error near unexpected token `('
root ~ # [ 1.655409] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
-sh: syntax error near unexpected token `('
root ~ # [ 1.655426] ata5: SATA link down (SStatus 0 SControl 300)
-sh: syntax error near unexpected token `('
root ~ # [ 1.655866] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded
-sh: syntax error near unexpected token `('
root ~ # [ 1.655869] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out
-sh: syntax error near unexpected token `('
root ~ # [ 1.655871] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out
-sh: syntax error near unexpected token `('
root ~ # [ 1.656279] ata1.00: ATA-9: SanDisk SDSSDP064G, 2.0.0, max UDMA/133-sh: [: missing `]'
root ~ # [ 1.656282] ata1.00: 125045424 sectors, multi 1: LBA48 NCQ (depth 31/32)
-sh: syntax error near unexpected token `('
root ~ # [ 1.656906] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (unknown) succeeded
-sh: syntax error near unexpected token `('
root ~ # [ 1.656912] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (unknown) filtered out
-sh: syntax error near unexpected token `('
root ~ # [ 1.656924] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (unknown) filtered out
-sh: syntax error near unexpected token `('
root ~ # [ 1.657207] ata1.00: configured for UDMA/133
-sh: [: missing `]'
root ~ # [ 1.657337] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDP06 2.0. P: 0 ANSI: 5
-sh: [: missing `]'
root ~ # [ 1.657469] sd 0:0:0:0: Attached scsi generic sg0 type 0
-sh: [: missing `]'
root ~ # [ 1.657475] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/596 GiB)
-sh: syntax error near unexpected token `('
root ~ # [ 1.657547] sd 0:0:0:0: [sda] Write Protect is off
-sh: [: missing `]'
root ~ # [ 1.657549] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
-sh: [: missing `]'
root ~ # [ 1.657566] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doen't support DPO or FUA
> [ 1.658007] sda: sda1 sda2
> [ 1.658354] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 1.658368] Freeing unused kernel memory: 3468k freed
> [ 1.658764] Write protecting the kernel text: 5856k
> [ 1.658783] Write protecting the kernel read-only data: 2068k
> [ 1.657568] ACPI: Invalid Power Resource to register!
> [ 1.663412] uvesafb: Intel Corporation, Intel® Sandybridge/Ivybridge Graphcs Controller, Hardware Version 0.0, OEM: Intel® Sandybridge/Ivybridge Graphis Chipset Accelerated VGA BIOS, VBE v3.0
Does any of that help?
RE: New OpenELEC box, a few problems - nickr - 2013-01-05
what is the output of
Code:
ls -lR /dev/dvbRE: New OpenELEC box, a few problems - Billzilla - 2013-01-06
(2013-01-05, 21:57)nickr Wrote: what is the output ofCode:ls -lR /dev/dvb
root ~ # ls -lr /dev/dvb
total 0
drwxr-xr-x 2 root root 120 Jan 6 06:07 adapter1
drwxr-xr-x 2 root root 120 Jan 6 06:07 adapter0
root ~ #
RE: New OpenELEC box, a few problems - nickr - 2013-01-06
ls -lR not ls -lr
RE: New OpenELEC box, a few problems - Billzilla - 2013-01-06
Whoop sorry ...
root ~ # ls -lR /dev/dvb
/dev/dvb:
total 0
drwxr-xr-x 2 root root 120 Jan 6 06:07 adapter0
drwxr-xr-x 2 root root 120 Jan 6 06:07 adapter1
/dev/dvb/adapter0:
total 0
crw-rw---- 1 root video 212, 4 Jan 6 06:07 demux0
crw-rw---- 1 root video 212, 5 Jan 6 06:07 dvr0
crw-rw---- 1 root video 212, 3 Jan 6 06:07 frontend0
crw-rw---- 1 root video 212, 7 Jan 6 06:07 net0
/dev/dvb/adapter1:
total 0
crw-rw---- 1 root video 212, 68 Jan 6 06:07 demux0
crw-rw---- 1 root video 212, 69 Jan 6 06:07 dvr0
crw-rw---- 1 root video 212, 67 Jan 6 06:07 frontend0
crw-rw---- 1 root video 212, 71 Jan 6 06:07 net0
Would a later version of tvheadend help? The version that came with OpenELEC is 1.6 something, the latest version is 3.2 something.
RE: New OpenELEC box, a few problems - nickr - 2013-01-06
That looks like the right permissions and so forth. You do realise in the tvheadend config web page that TV Adapters is a drop down box that looks empty until you click on it?
RE: New OpenELEC box, a few problems - Billzilla - 2013-01-06
(2013-01-06, 00:53)nickr Wrote: That looks like the right permissions and so forth. You do realise in the tvheadend config web page that TV Adapters is a drop down box that looks empty until you click on it?
Yes, done that but no adapter appears for me to select.
edit - That's weird .... tvheadend reports itself as version 3.2.18 using the browser interface but 1.6 something on the actual box itself.
RE: New OpenELEC box, a few problems - Billzilla - 2013-01-06
Would it be worth trying pulling the Hauppauge tuner card out, starting the box & run it for a while, then put the card back in to see if it gets detected?
RE: New OpenELEC box, a few problems - Billzilla - 2013-01-06
(2013-01-06, 09:14)Billzilla Wrote: Would it be worth trying pulling the Hauppauge tuner card out, starting the box & run it for a while, then put the card back in to see if it gets detected?
I tried that, no difference.
Please guys, I really need this thing to work!
RE: New OpenELEC box, a few problems - Billzilla - 2013-01-06
How about I try the 'Generic OSS build' version?
http://releases.openelec.tv/OpenELEC-Generic_OSS.i386-2.99.1.tar.bz2
RE: New OpenELEC box, a few problems - nickr - 2013-01-06
Look if your problem is with openelec then maybe you should be in their forums. tvheadend is not part of xbmc. You could also try the tvheadend forums.