+- Kodi Community Forum (https://forum.kodi.tv)
+-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33)
+--- Forum: PVR & Live TV Support (https://forum.kodi.tv/forumdisplay.php?fid=167)
+--- Thread: Linux Hauppauge 2250 cold boot issue (/showthread.php?tid=159202)
Hauppauge 2250 cold boot issue - 46and2 - 2013-03-14
So for some reason, my HVR-2250 is not detected properly after a cold boot. A reboot has it working fine, but I cannot for the life of me figure out why a cold boot causes it to fail. I've done some snooping, and it appears the following modules are involved in the boot process somehow: tveeprom, saa7164, tda18271, and s5h1411. There may be more, but this is all I can figure out. If I do a "dmesg | grep saa" after a cold boot, there are no lines. Same for the other 3 modules. After a reboot, I see messages for all but s5h1411. Perhaps the modules are not loading in the correct order or something?
Sorry, I should put some more info in. I am running Ubuntu 12.10 minimal with kernel 3.5.0-25 generic. The card works fine on a reboot, and this just started happening about 2 days ago. I may try to revert to the previous kernel and see if that helps.
[edit] Reverting to 3.5.0-24 generic did not solve the issue.
RE: Hauppauge 2250 cold boot issue - teeedubb - 2013-03-14
Paste the output of dmesg to pastebin or similar and post a link to it here.
RE: Hauppauge 2250 cold boot issue - 46and2 - 2013-03-14
Thanks teeedubb. Here they are:
dmesg after cold boot: http://pastebin.com/1W3cc0vi
dmesg after reboot: http://pastebin.com/RbidaMVp
RE: Hauppauge 2250 cold boot issue - teeedubb - 2013-03-15
From a quick look it seems like there's no reference to the card on a cold boot... Not sure what's up although I could have missed something. You could try compiling the V4L dvb drivers and see if that helps, or maybe try the kernel from 13.04.