Intel NUC - Haswell (4th Generation CPU) - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Discussions (https://forum.kodi.tv/forumdisplay.php?fid=222) +--- Forum: Hardware (https://forum.kodi.tv/forumdisplay.php?fid=112) +--- Thread: Intel NUC - Haswell (4th Generation CPU) (/showthread.php?tid=176718) Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
|
RE: Intel NUC - HTPC (Haswell Late 2013 edition) - voip-ninja - 2014-07-22 (2014-07-22, 19:09)elim Wrote: can anyone tell me if the i3 nuc is quiet? Quiet is relative but from my perspective if all it's doing is running XBMC under OE and doing hardware decode of video it is virtually silent. By comparison the "quiet" mini ITX I had prior was quite loud compared to this. RE: Intel NUC - HTPC (Haswell Late 2013 edition) - elim - 2014-07-23 (2014-07-22, 19:35)voip-ninja Wrote:(2014-07-22, 19:09)elim Wrote: can anyone tell me if the i3 nuc is quiet? well i will be 2m away from it so if its loud enough that i can clearly hear it then it could be a problem, i dont mind a gentle hum RE: Intel NUC - HTPC (Haswell Late 2013 edition) - scarecrow420 - 2014-07-23 Id say it is quiet enough, quieter than any other small HTPC ive ever had... Only you can make the judgement for yourself though, you might have particularly sensitive ears or whatever. If it really came to it, you could get a fanless case for it if you weren't happy RE: Intel NUC - HTPC (Haswell Late 2013 edition) - voip-ninja - 2014-07-23 (2014-07-23, 00:19)elim Wrote:(2014-07-22, 19:35)voip-ninja Wrote:(2014-07-22, 19:09)elim Wrote: can anyone tell me if the i3 nuc is quiet? As I said, where I have it installed (about 3m away inside of an entertainment hutch) it is more or less completely silent... by comparison my previous PC was fairly quiet but I could definitely hear it when it was running. As someone else points out, only you can truly be the judge. I would say that during media playback of any kind you are very unlikely to be able to hear it. If it's a meter away from your head when you are sleeping maybe it would bother you. The good news is that if the noise becomes a problem you can buy a completely passive case/cooling-solution for it that should take care of things for you. RE: Intel NUC - HTPC (Haswell Late 2013 edition) - elim - 2014-07-23 (2014-07-23, 00:36)voip-ninja Wrote:(2014-07-23, 00:19)elim Wrote:(2014-07-22, 19:35)voip-ninja Wrote: Quiet is relative but from my perspective if all it's doing is running XBMC under OE and doing hardware decode of video it is virtually silent. thanks for your help also found this from someone on the forums "tip to make the nuc quiet" https://communities.intel.com/thread/53372 RE: Intel NUC - HTPC (Haswell Late 2013 edition) - voip-ninja - 2014-07-23 (2014-07-23, 00:40)elim Wrote:(2014-07-23, 00:36)voip-ninja Wrote:(2014-07-23, 00:19)elim Wrote: well i will be 2m away from it so if its loud enough that i can clearly hear it then it could be a problem, i dont mind a gentle hum Well, I just did the "ear test" and while I can hear the NUC (very soft whirring noise) from 30-40cm away, the noise level doesn't change whatsoever by pressing on the top or putting an object on top. Just my .02. I think the best thing is you hope for the best and worst case you buy a new enclosure for $100 or so. RE: Intel NUC - HTPC (Haswell Late 2013 edition) - solamnic - 2014-07-23 I bought an Intel 34010 haswell nuc also bought Kingston 8gb HX321LS11IBK2/8 8GB (2X4GB) here is something weird... when i install only one ram module on the upper dd3 slot Nuc boots ok.. if i install ram on the lower slot or on both slots nuc hangs.. is it a faulty nuc unit? RE: Intel NUC - HTPC (Haswell Late 2013 edition) - nickr - 2014-07-23 Or faulty RAM? Why would you want that much RAM for an HTPC? Intel NUC - HTPC (Haswell Late 2013 edition) - solamnic - 2014-07-23 (2014-07-23, 21:35)nickr Wrote: Or faulty RAM? Both modules work on the upper slot... None of them works on lower slot.. ( going to play a bit hearthstone ) RE: Intel NUC - HTPC (Haswell Late 2013 edition) - nickr - 2014-07-23 Sounds like the motherboard then. RE: Intel NUC - HTPC (Haswell Late 2013 edition) - voip-ninja - 2014-07-24 (2014-07-23, 22:22)solamnic Wrote:(2014-07-23, 21:35)nickr Wrote: Or faulty RAM? Are you sure you have the ram latched properly? Sounds like it's not seated correctly. RE: Intel NUC - HTPC (Haswell Late 2013 edition) - scarecrow420 - 2014-07-24 Not specifically NUC related but from a general computing perspective: In my desktop PC I was trying to get a 16GB matched set of 4 G-Skill RAM sticks working and it would not post. I could use any combination of any 2 sticks of the 4 in any motherboard slots and it was fine, but as soon as I added a 3rd or 4th stick it would not post. I finally got it to work by going into BIOS and manually configuring the RAM voltage, timings etc as per the RAM specs and the machine started up with all 4 sticks. Essentially the motherboard auto SPD setting was somehow not working (perhaps it was setting the voltage on the low side as the RAM specs said 1.5 - 1.6v and when I manually configured everything I set it at 1.55v). So you could try getting into BIOS with 1 stick of RAM installed, then manually set the RAM speed timings and voltage according to your RAM specs and see if anything changes. If that doesn't work you could even try a minor voltage increase over stock voltage (be careful/research safe limit first etc) just to see if that changed anything. If still no joy then look to take the NUC and/or RAM back to the shop you purchased it from and see if they can either try alternative RAM or try that RAM in an alternative NUC RE: Intel NUC - HTPC (Haswell Late 2013 edition) - solamnic - 2014-07-24 (2014-07-24, 00:50)voip-ninja Wrote:(2014-07-23, 22:22)solamnic Wrote:(2014-07-23, 21:35)nickr Wrote: Or faulty RAM? i have tried it many times ... will try again and report if some changes.. also contacted intel about this... btw.. i have 100% rate of not making any PC to work for the first time i lay my hands on it... RE: Intel NUC - HTPC (Haswell Late 2013 edition) - solamnic - 2014-07-24 Intel answered: "We have received your email and are happy to assist you. Please we would like you to inform you that in most NUCs the lower slot does not work but you could test with a different memory. The link below gives the list of supported memory configurations also the list of tested memory" Are we serious? Lower slot DOES NOT WORK in NUCS? RE: Intel NUC - HTPC (Haswell Late 2013 edition) - voip-ninja - 2014-07-24 I kind of think you got an idiot from their support team. All of their specs say it supports two RAM sticks, I would escalate the issue within their tech support team. |