[How-To] The NEW XBOX One Media Remote On Openelec - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111) +---- Forum: Linux (https://forum.kodi.tv/forumdisplay.php?fid=52) +---- Thread: [How-To] The NEW XBOX One Media Remote On Openelec (/showthread.php?tid=190487) |
[How-To] The NEW XBOX One Media Remote On Openelec - FishOil - 2014-03-27 XBOX-ONE Media Remote This remote does NOT work out of the box with Openelec at the time of this writing. So, Here ya go. Create an autostart.sh file in /storage/.config/ autostart.sh Code: #!/bin/sh change /dev/lirc0 to fit your needs if its different make it executable Code: chmod +x /storage/.config/autostart.sh Create an lircd.conf in /storage/.config/ lircd.conf Code: # Please make this file available to others Create an Lircmap.xml in /storage/.kodi/userdata Note the capital L Lircmap.xml Code: <!-- This file contains the mapping of LIRC keys to XBMC keys used in Keymap.xml --> Copy the system user remote.xml to the keymaps directory Code: cp /usr/share/kodi/system/keymaps/remote.xml /storage/.kodi/userdata/keymaps Or you may find it easier to use this remote.xml Reboot and it should be working. Tweak Lircmap.xml and or remote.xml to suite your taste RE: [How-To] The NEW XBOX One Media Remote On Openelec - kindrudekid - 2014-03-27 Is this for any standard IR reciever , any idea will it work with intel NUC DN2820FYKH RE: [How-To] The NEW XBOX One Media Remote On Openelec - FishOil - 2014-03-28 (2014-03-27, 17:34)kindrudekid Wrote: Is this for any standard IR reciever Yes Dont know, Try it out RE: [How-To] The NEW XBOX One Media Remote On Openelec - kindrudekid - 2014-03-29 (2014-03-28, 00:48)FishOil Wrote:(2014-03-27, 17:34)kindrudekid Wrote: Is this for any standard IR reciever got any idea to set it up on XBMC with ubuntu 13.10 as base RE: [How-To] The NEW XBOX One Media Remote On Openelec - FishOil - 2014-03-29 (2014-03-29, 21:08)kindrudekid Wrote:(2014-03-28, 00:48)FishOil Wrote:(2014-03-27, 17:34)kindrudekid Wrote: Is this for any standard IR reciever Assuming you have a LIRC IR remote working already, Just make a backup of your lircd.conf and Lircmap.xml. Then use the two in the first post. Reboot and you should be good to go. If not, install LIRC and put those two files in the correct place. /etc/lirc/lircd.conf /home/the-xbmc-user/.xbmc/userdata/Lircmap.xml RE: [How-To] The NEW XBOX One Media Remote On Openelec - kindrudekid - 2014-03-29 (2014-03-29, 21:28)FishOil Wrote: Assuming you have a LIRC IR remote working already, Just make a backup of your lircd.conf and Lircmap.xml. Then use the two in the first post. Sweet got it to work, now only need to figure out how to get the view button to function as context menu so it can pop up the context menu! RE: [How-To] The NEW XBOX One Media Remote On Openelec - FishOil - 2014-03-29 (2014-03-29, 22:13)kindrudekid Wrote:(2014-03-29, 21:28)FishOil Wrote: Assuming you have a LIRC IR remote working already, Just make a backup of your lircd.conf and Lircmap.xml. Then use the two in the first post. The menu button functions as the context menu. do you want to switch them? If so, look closely at the Lircmap.xml and you can figure it out. RE: [How-To] The NEW XBOX One Media Remote On Openelec - kindrudekid - 2014-03-29 (2014-03-29, 22:18)FishOil Wrote: The menu button functions as the context menu. do you want to switch them? If so, look closely at the Lircmap.xml and you can figure it out. I tried but nothing happens on my, the top buttons above the direction they do nothing. RE: [How-To] The NEW XBOX One Media Remote On Openelec - FishOil - 2014-03-29 Make a backup of your /home/the-xbmc-user/.xbmc/userdata/keymaps/remote.xml and try this one. http://pastebin.com/raw.php?i=aQSDnR5J RE: [How-To] The NEW XBOX One Media Remote On Openelec - kindrudekid - 2014-03-29 it is working brother! (2014-03-29, 22:38)FishOil Wrote: Make a backup of your /home/the-xbmc-user/.xbmc/userdata/keymaps/remote.xml just curious what was different in the remote xml ? PS: i'm now on a temp setup of openelec, will figure out to get it working on ubuntu later ... RE: [How-To] The NEW XBOX One Media Remote On Openelec - FishOil - 2014-03-29 (2014-03-29, 22:46)kindrudekid Wrote: it is working brother! See......LIRC is easy! Good Job! (2014-03-29, 22:46)kindrudekid Wrote: it is working brother! The directions I was giving you were for Ubuntu but you were smart enough to figure it out. I am sure I have some sort of tweaked Lircmap.xml and remote.xml that is not quite standard. Thats why it works with the remote.xml I gave you. To others reading this, you might want to consider using it as well (or tweak your existing one). RE: [How-To] The NEW XBOX One Media Remote On Openelec - kindrudekid - 2014-03-29 (2014-03-29, 22:51)FishOil Wrote:(2014-03-29, 22:46)kindrudekid Wrote: it is working brother! Oh I live for this stuff, its just that now that I have a job and full time school, I prefer not to invest time to go through and read the wiki. I just needed to make sure it works on my NUC, I'll be restoring my ubuntu image and figure it out to work with it till a stable openelec comes out or rather all my addons work with gotham RE: [How-To] The NEW XBOX One Media Remote On Openelec - mxlmxl - 2014-04-11 Hi, is there any chance of helping out a complete newbie thats only installed Openelec for the first time today. Bought this remote as looks the best, but can not get it to work. First time trying to SSH/Putty and not sure doing it right. Do you have a more detailed instructions at all please? RE: [How-To] The NEW XBOX One Media Remote On Openelec - FishOil - 2014-04-11 (2014-04-11, 15:29)mxlmxl Wrote: Hi, Ok..This one is just for you. As it will overwrite existing files if someone else has them already (That you dont have) We will execute the commands one by one and explain. ssh into the openelec box and copy paste these commands. Code: nano ~/.config/autostart.sh Then copy paste this into it. (or type it) Code: #!/bin/sh press ctrl+o (<---------Thats the Letter O not ZERO) then enter to confirm the saving Press ctrl+x to exit nano Then make it executable Code: chmod +x ~/.config/autostart.sh This command will download text from pastebin and save it as lircd.conf Code: wget http://pastebin.com/raw.php?i=UcyYsQ6D -O /storage/.config/lircd.conf This command will again download text from pastbin and save it as Lircmap.xml in the userdata directory Code: wget http://pastebin.com/raw.php?i=KEQSnzSE -O /storage/.xbmc/userdata/Lircmap.xml This command will again download text from pastebin and save it as remote.xml in the keymaps directory Code: wget http://pastebin.com/raw.php?i=aQSDnR5J -O /storage/.xbmc/userdata/keymaps/remote.xml All this assumes you have a correct IR receiver and it is identified to the system as /dev/lirc0. Reboot, Use the remote. RE: [How-To] The NEW XBOX One Media Remote On Openelec - mxlmxl - 2014-04-13 (2014-04-11, 20:57)FishOil Wrote: Awesome instructions Just wanted to say thank you! Strangely it simply would not work on Openelec. I then tried XBMCubuntu and adjusted them slightly and everything worked perfectly. Really appreciate your help! |