Linux Liplianin installation - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111) +---- Forum: Linux (https://forum.kodi.tv/forumdisplay.php?fid=52) +---- Thread: Linux Liplianin installation (/showthread.php?tid=207732) |
Liplianin installation - drake008 - 2014-10-31 I tried to install the latest liplianin drivers from bitbucket. When I type "sudo make menuconfig" I get this error Code: make -C /home/drake/lip/v4l menuconfig "sudo make" gives me this Code: make -C /home/drake/lip/v4l and sudo make install gives me this Code: make -C /home/drake/lip/v4l install I downloaded the file from bitbucket directly and put the unrared file via winscp on the xbmcbuntu machine and gave the 777 permission. Anyone knows how to install this, without getting the "permission denied"? RE: Liplianin installation - black_eagle - 2014-10-31 Hmm, you don't need that to get your tuner working. Any kernel version from 3.0 onwards should include support for it automatically, as negge pointed out here http://forum.kodi.tv/showthread.php?tid=206945&pid=1823143 What you do need however, is firmware for it. There is a guide here http://www.vdr-portal.de/board16-video-disk-recorder/board99-distributionen/board96-yavdr/98780-tevii-s660-installation-guide-english/ that explains where to download from. Once you have downloaded the file, extract it. You need to copy the *.fw files into /lib/firmware and then create a link from the actual firmware to the name the kernel is looking for (according to what I have read, dvb-usb-s660.fw). You could of course just rename it also. You can create the link with Code: cd /lib/firmware Then reboot. Check dmesg with Code: dmesg | grep dvb to make sure the firmware is loaded. RE: Liplianin installation - drake008 - 2014-10-31 Thanks you. The S660 that I have is somewhat broken. I get all Transponders from Astra 19.2 and nearly all from 28.2 perfect without errors. But the one that is needed the most is the one with BBC1 and 2 HD. That is the one on 10847, 23000. My old Receiver can receive them perfect without flaws. The S660 however makes just on this Transponder alot of errors so that watching it via PC isn't possible at all. I'll get a Technotrend 3650 CI USB Device later the next week so that I try it out with that device and as far as I read these Technotrends are a bit picky RE: Liplianin installation - black_eagle - 2014-10-31 You do know those devices are not well supported under linux ? |