+- Kodi Community Forum (https://forum.kodi.tv)
+-- Forum: Development (https://forum.kodi.tv/forumdisplay.php?fid=32)
+--- Forum: Kodi Application (https://forum.kodi.tv/forumdisplay.php?fid=93)
+--- Thread: XBMC Tuxbox Enigma Stream Client (Enigma / Enigma2 Based Dreambox & Dbox2) (/showthread.php?tid=23834)
Uninstall addon? - Hankwilliams - 2012-01-18
rehnmark Wrote:Hi,
If you go to system->addons->install addon from zipfile, it should work.
I can check when i come home that the zipfile hasnt got corrupted when i transfered it to the website.
Best Regards
Rehnmark
Edit:
Works for me
Hi there!
I installed this addon and now I want to uninstall it, but I cant find where to do that. Under video - addons - Dreambox ... I dont have uninstall as an option. And I cant find it anywhere under system - addons.
Any suggestions?
- Hankwilliams - 2012-01-18
Using Enigma 1, dm600 and ATV2 with xbmc 11 eden.
- blubb1 - 2012-01-20
Hankwilliams Wrote:Using Enigma 1, dm600 and ATV2 with xbmc 11 eden.did you do something special? every time I try it quits directly at the startup with an error
- olosi - 2012-01-20
hi there this add-on is fantastic.... is there any chance that we get the EPG visible and change channel with apple remote control without going back every time to the bouquets ?
- Hankwilliams - 2012-01-20
blubb1 Wrote:did you do something special? every time I try it quits directly at the startup with an error
No It didnt work on my ATV (using DM600, enigma 1), and I just want to uninstall it (earlier post).
- linocost - 2012-01-24
Tam2 Wrote:I was having problems with tuxbox and installed the old-webinf and that fixed tuxbox on xbmc however still getting problems with script failed on certain bouquets on this plugin--- the same, from when i upgraded satellites settings ! ---
- Krankie882 - 2012-02-01
Krankie882 wrote:
Just got the enigma 2 plug in
http://dl.dropbox.com/u/31328853/plugin ... -0.0.2.zip
Had to edit the py file and change the ip address to correspond to my dreambox and save.
Works a treat
Once the channels have loaded up and you have selected the channel to play you can then turn off the subtitles and even change the audio stream by holding down the centre button on the apple remote until the options come up at the bottom of the screen,
This is working amazing on my apple tv2 and my first generation apple tv
Thought i would post this info in the hope it helps someone else
- granger33 - 2012-02-05
Hi,
I unziped the file, put in xbmc/addons, then edited the settings file to ipdream, user and pass. Go to xbmc and videos addons/dreambox, choose television and i have the error: Script failed: plugin.video.dreambox Iam running xbmc on windows7
Here is my settings:
<category label=ՇeneralԾ
<setting id="192.168.1.122" type="text" label="30000" default="192.168.1.122"/>
<setting id="root" type="text" label="30001" default="root"/>
<setting id="dreambox" type="text" label="30002" default="dreambox"/>
<setting id="setstandby" type="bool" label="30003" default="true" />
</category>
- rehnmark - 2012-02-09
Hi,
You should not edit the file manually.
In XBMC, go to Settings, addons, browse to the DreamboxPlugin, select settings, there you can edit the address/user/pass.
The plugin only supports Enigma2 boxes, like dm800/dm500HD, not DM500, DM600.
If you run on a custom port(not port 80), you should enter ipadress:port in the settings menu(ex 192.168.0.1:82).
Make sure you are running the latest version of XBMC.
Best Regards,
Rehnmark
granger33 Wrote:Hi,
I unziped the file, put in xbmc/addons, then edited the settings file to ipdream, user and pass. Go to xbmc and videos addons/dreambox, choose television and i have the error: Script failed: plugin.video.dreambox Iam running xbmc on windows7
Here is my settings:
<category label=ՇeneralԾ
<setting id="192.168.1.122" type="text" label="30000" default="192.168.1.122"/>
<setting id="root" type="text" label="30001" default="root"/>
<setting id="dreambox" type="text" label="30002" default="dreambox"/>
<setting id="setstandby" type="bool" label="30003" default="true" />
</category>
- stuattravs - 2012-02-11
How great would it be if the enigma2 channels could be incorporated into the tv guide section of xbmc gui along with epg, picon etc.
Is this even possible? or has this been asked before ?
Script failed - gkkp - 2012-02-11
hi there,
the plugin seems to start ok, shows tv channels and all the picons, but when I select a channel the plugin throws an error.
This is what the logfile says:
Code:
15:13:17 T:3112 ERROR: C:\Users\G蛁ppData\Roaming\XBMC\addons\plugin.video.dreambox\Dreambox.py:230: DeprecationWarning: os.getcwd() currently lies to you so please use addon.getAddonInfo('path') to find the script's root directory and DO NOT make relative path accesses based on the results of 'os.getcwd.'
picondir = os.getcwd() + "\\Picons\\"
15:13:17 T:3112 ERROR: Error Type: <type 'exceptions.UnicodeDecodeError'>
15:13:17 T:3112 ERROR: Error Contents: 'ascii' codec can't decode byte 0xe9 in position 10: ordinal not in range(128)
15:13:17 T:3112 ERROR: Traceback (most recent call last):
File "C:\Users\G蛁ppData\Roaming\XBMC\addons\plugin.video.dreambox\default.py", line 35, in <module>
webif.stream(data)
File "C:\Users\G蛁ppData\Roaming\XBMC\addons\plugin.video.dreambox\Dreambox.py", line 233, in stream
picon = picondir + servicename.replace("/", "_") + '.png'
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe9 in position 10: ordinal not in range(128)My username contains an é...
Any idea how to solve this?
Thanks - Gé
- gkkp - 2012-02-11
gkkp Wrote:.....Any idea how to solve this?
...
my (own) solution in dreambox.py would be to change line 231:
Code:
picondir = os.getcwd() + "\\Picons\\"to
Code:
picondir = os.getcwd().decode('windows-1252') + "\\Picons\\"It works, but I'm not a python specialist...
cheers - Gé
- gkkp - 2012-02-12
and perhaps change resources/settings.xml to
Code:
<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<settings>
<category label=”General”>
<setting id="ipaddress" type="text" label="30000" default="192.168.1.88"/>
<setting id="username" type="text" label="30001" default="root"/>
<setting id="password" type="text" label="30002" default="dreambox"/>
<setting id="moviedir" type="text" label="30003" default="/hdd/movie/" />
<setting id="sep" type="sep" label="" default="" />
<setting id="setstandby" type="bool" label="30004" default="true" />
</category>
</settings>and resources/language/english/strings.xml to
Code:
<?xml version="1.0" encoding="utf-8" standalone="yes"?>
<strings>
<string id="1">Television</string>
<string id="2">Radio</string>
<string id="3">Movies</string>
<string id="30000">Dreambox IP address</string>
<string id="30001">Dreambox username</string>
<string id="30002">Dreambox password</string>
<string id="30003">Dreambox default movie location</string>
<string id="30004">Set Dreambox in standby</string>
</strings>and Dreambox.py, "def __init__" to
Code:
def __init__(self, handle):
self.handle = handle
self.ipaddress = self.__settings__.getSetting("ipaddress")
self.username = self.__settings__.getSetting("username")
self.password = self.__settings__.getSetting("password")
self.setstandby = self.__settings__.getSetting("setstandby")
self.moviedir = self.__settings__.getSetting("moviedir")
password_mgr = urllib2.HTTPPasswordMgrWithDefaultRealm()
dreambox_url = "http://" + self.ipaddress
password_mgr.add_password(None, dreambox_url, self.username, self.password)
handler = urllib2.HTTPBasicAuthHandler(password_mgr)
opener = urllib2.build_opener(handler)
urllib2.install_opener(opener)and Dreambox.py, start of "readmovies(self)" to
Code:
def readmovies(self):
data = urllib2.urlopen("http://" + self.ipaddress + "/web/movielist?dirname=" + self.moviedir)
e2movielist = xml.dom.minidom.parse(data)
data.close()This would allow you to define an alternative path to the default movie location.
Hope this helps...
Gé
- charger41 - 2012-02-25
anybody can help me with dm500s to stream external ip? im using local ip right now working great, but when i wanna set-up to my public ip got no video, i got channel list but no video when i streaming, im using appletv on xbmc tuxbox application i forward already port 80 on dm500s ip add, i check my port each open, but got no video on Public ip, any ideas pls. thanks
- Bosniarasta - 2012-02-29
It would be very nice if subtitle plugin can read EPG, name of the movie so we can use subtitle player on enigma2 plugin
