IR / RF Remote Controls for Windows: Links to Explanations, Tutorials, and Guides - Printable Version
+- XBMC Community Forum (http://forum.xbmc.org)
+-- Forum: Help and Support (/forumdisplay.php?fid=33)
+--- Forum: XBMC General Help and Support (/forumdisplay.php?fid=111)
+---- Forum: Windows support (/forumdisplay.php?fid=59)
+---- Thread: IR / RF Remote Controls for Windows: Links to Explanations, Tutorials, and Guides (/showthread.php?tid=38585)
- echnaton - 2009-06-13 18:34
ArturDent Wrote:TO ADMIN:
I also have the hama remote and couldn't get it to work with XMBC until now. This works beautifully, thank you! :-)
laptop running xp - rlefig - 2009-06-20 22:40
Hi love xbmc, have it on my xbox. Now I have it on an older laptop running in my living room, running XP PRO (NO MCE). I have read through all these threads but have not found any clarification on this. If I get the Windows MCE remote, do I need the MCE software? I am just trying to find the best way to get the remote control solution. After reading all the docs it looks like I can not use the built in laptop IR receiver.
it looks like I could also go with the xbox1 remote with the xbox to pc usb adapter.
Thoughts, please help before I purchase the wrong thing on ebay
- cgmark - 2009-06-26 23:17
I purchased this MCE remote from newegg and it works well with MCE in xp, vista, and windows 7.
One issue I was having was that with the default windows driver the remote functions like up,down,left, right, volume , work all the time. Disabling hid in event ghost did not prevent it.
One quick solution I found was to go into device manager, under keyboards, uninstall the ehome keyboard items. The remote will now only work inside of an application like xbmc.
Each time you reboot the pc it will reinstall them unless you do what I did and modify the inf file for the remote receiver.
The file name is :hidir.inf
Remove the sections that begin with \ ; Keyboard
It now shows as unkown device under HID devices, but still works with eventghost and XBMC. I can even use the green button to launch XBMC without media center popping up.
So unless I preset a button in eventghost , the buttons do nothing. Which is how I wanted it.
It is also much snappier, all the buttons repeat fast or slow depending on how I want them set. In eventghost I set the button delay to .10 for the mce plugin.
Then for each command I added the lines Wait: .2 Sec or whatever you want between key repeats, followed by Clear Pending Events.
So I can have something like play repeat really slow, but volume just hold it down and it increases fast.
- jochenz - 2009-07-07 16:45
petermarshall15 Wrote:The only way to get xbmc to be responsive to remote commands when cycling through menu's is to use the Microsoft MCE remote and the Microsoft Drivers. By default the microsoft driver maps the up,down,left,right, buttons which are sluggish with other methods (this is a problem with the way eventghost, IRbox ect work.). I personally then map the other buttons like play and stop etc.. using eventghost - these buttons do not need to be held down to scroll through menus and work fine when mapped.
I have uninstalled eventghost, because of the reason that you state here.
But what you are saying is that you can use the Microsoft driver next to the Eventghost software?
- gui - 2009-07-12 02:52
i am using the original xbox remote with IRXBOX and work ok,but i am not able to assign functions to the remote buttons like in the original xbox.
for example i would like the SELECT button to change the resolution of the video wile in full screen like on the xbox,and to have MENU opening the OSD ,and TITLE to give the codec informations.
i tried looking at the keymap file on xbmc folder and seems to be ok but still this functions dont work.
Plus would be possible to use the remote to insert data like password or username with the softkeyboard like in the xbox?
CAN YOU HELP??
i am running the XBMC Babylon 9.04.1-repack2.
- kury - 2009-07-16 23:30
Has anyone figured out the solution to the vista remote controller and XBMC? Any help would be greatly appreciated....
- petermarshall15 - 2009-07-17 11:23
"I have uninstalled eventghost, because of the reason that you state here.
But what you are saying is that you can use the Microsoft driver next to the Eventghost software?"
Yes, so from a clean windows xp and xbmc you would do the following:
- Plug in the official microsoft mce remote usb reciever
- it will autoinstall drivers included with windows xp (arrow buttons now work in xbmc)
- install eventghost and add the mce remote to it so it listens for commands from the remote
- don't click 'disable HID' (leave it on instead)
- Now assign the rest of the buttons like play, stop etc.... using eventghost,
This method works in vista also.
- needtotest - 2009-07-17 12:24
how do you block the green mce button when you do not disable HID?
- Jesse - 2009-07-18 08:46
For Harmony users, check this:
Solved my problems
- cgmark - 2009-07-31 03:23
needtotest Wrote:how do you block the green mce button when you do not disable HID?
If you are running vista or windows 7 go to control panel and look under keyboards . Remove any IR devices from there. Then look under HID for ehome receiver. Disable it. You have to remove the keyboards that depend on the receiver before it will let you disable the driver.
The remote will now work only with programs like event ghost. Doesn't matter if HID is enabled or not. You can even use the green button now .
Works because the driver that event ghost actually reads is the one under USB controllers in device manager. As long as that driver is running is all that matters.