Scott R Wrote:OK, it looks like I spoke too soon. I'm still having playback issues with my 2nd Revo. The good (?) news was that I was able to recreate them on my 1st Revo, so I'm hoping that someone out there may have a solution. OK, so just to clarify what my issues are: When playing standard-def DVD .ISO files (DSPlayer not involved), or when playing high-def files (via DSPlayer), I get non-smooth playback. I'm suspecting judder.

Now, in one room I have a Revo hooked up via HDMI to an LCD TV with the desktop resolution set as 1920x1080 (progressive) @ 24Hz. The files play perfectly smooth on this setup. But if I set the resolution to 1920x1080 @ 60Hz or 1280x720 @ 60Hz, or 1280x720 @ 24Hz, I get non-smooth playback/judder.

In the other room I have a Revo hooked up via HDMI to an A/V receiver which is then hooked up to a 1280x720 LCD projector. The native resolution I was using there was 1280x720 @ 60Hz. I get non-smooth playback/judder there as well and, unfortunately, I can't set that projector to the "known judder-free" resolution of 1920x1080 @ 24Hz.

Any ideas?

Scott R Wrote:Quick follow-up. I reinstalled MPC-HC on the Revo that's hooked up to the 720p projector. With my desktop resolution set as 1280x720 @ 60Hz, both standard-def DVD .ISO's and high-def files play smoothly. At 24Hz, it's not quite as smooth.

So this is really bizarre. If I'm able to use 1920x1080 @ 24Hz, I can use DSPlayer smoothly. But if my display isn't capable of that specific resolution/refresh rate then I have to use MPC-HC.

Tiben, any ideas?

Tomorrow I'll try installing CoreCodec 2.0 and see if that makes any difference.

tiben20 Wrote:your problem just be fixed in svn i fixed it 4 hours ago

Tk0n Wrote:hi,

first of all, thanks for your fantastic effort making us able to use dxva with xbmc.

but i have a little sound problem.
ive got an ati graphics card and use the hdmi do submit the sound to my tv and then to my receiver.
i use ac3filter and it works as it should when playing a file in mpc-hc.

ive followed the instructions for using ac3filter in xbmc, that hades_2100 posted, but in xbmc i
only get the sound from the 2 front speakers. no Center and no rear.

i can see that ac3filter is used, because the icon is still there after i quit xbmc, but somehow its
used different than in mpc
regards,
tk0n

Tk0n Wrote:hi,

first of all, thanks for your fantastic effort making us able to use dxva with xbmc.

but i have a little sound problem.
ive got an ati graphics card and use the hdmi do submit the sound to my tv and then to my receiver.
i use ac3filter and it works as it should when playing a file in mpc-hc.

ive followed the instructions for using ac3filter in xbmc, that hades_2100 posted, but in xbmc i
only get the sound from the 2 front speakers. no Center and no rear.

i can see that ac3filter is used, because the icon is still there after i quit xbmc, but somehow its
used different than in mpc-hc.

regards,
tk0n

tiben20 Wrote:unfortunatly i tryed to add the possibility to configure ac3filter from an external interface.
http://ac3filter.net/forum/index.php?topic=852.0

But i got an idea that might work for making it easy to configure a filter which is used in the current filter graph. The concept is really simple, here it is. Many filters have what we call the ipropertypage, example for the ac3filter when you right click the systeme tray icone and click settings, you see a 3 panel settings window appearing. This is the propertypage for this filter. I think its possible to add this window within xbmc from a few click from the xbmc osd. Since xbmc would call the property page, the page would be shown without leaving the fullscreen. Ill try that possibility as soon as i get some time to code it.

tiben20 Wrote:unfortunatly i tryed to add the possibility to configure ac3filter from an external interface.
http://ac3filter.net/forum/index.php?topic=852.0

But i got an idea that might work for making it easy to configure a filter which is used in the current filter graph. The concept is really simple, here it is. Many filters have what we call the ipropertypage, example for the ac3filter when you right click the systeme tray icone and click settings, you see a 3 panel settings window appearing. This is the propertypage for this filter. I think its possible to add this window within xbmc from a few click from the xbmc osd. Since xbmc would call the property page, the page would be shown without leaving the fullscreen. Ill try that possibility as soon as i get some time to code it.

oldpainless Wrote:new build....27183-dx.....

error - ERROR: exception in CApplication::FrameMove()

log here http://pastebin.com/d3060b9c2

Exited XBMC, tried again. got the ERROR: CVMR9AllocatorPresenter::InitializeDevice AllocateSurfaceHelper returned:0x8876086c again.

log here http://pastebin.com/d44ff9b14



Cheers

K

blinkeb Wrote:Please activate debugging mode in xbmc before posting logs ...! Thanks