Manually installing CrystalHD driver/lib/firmware - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111) +---- Forum: Mac OS X (https://forum.kodi.tv/forumdisplay.php?fid=56) +---- Thread: Manually installing CrystalHD driver/lib/firmware (/showthread.php?tid=79683) |
- ds129 - 2010-08-21 muelli Wrote:Hello buddy, Hi muellie This is what I did a few days back. It should be correct. Not that I know what I'm doing. Step 1 Got the crystalhd-for-osx-2.0.0.zip from http://code.google.com/p/crystalhd-for-osx/downloads/list Or you can try 2.0.1.zip which is the latest I guess, but I've not tried it. Step 2 Unpacked the zip file and copied the files to Apple TV's /tmp directory. I used Cyberduck for this. Step 3 Opened terminal and did the following: Code: ssh [email protected] Step 4 Update XBMC with latest nightly by adding the installer to Launcher using the following: Code: defaults write com.teamxbmc.xbmclauncher XBMCAdditionalDownloadPlistURLs -array-add http://mirrors.xbmc.org/nightlies/osx/update_urls.plist Step 5 Reboot. And done! Actually, after I got my CrystalHD option to work in XBMC the other day, I still couldn't play any 1080p files. It hanged the ATV. Could hear some audio and see a few frames of video. But that's it. I couldn't even exit the movie. Had to always reboot. I just only downloaded and installed XBMC r33004 via launcher, and finally it played smoothly (thanks to the guys of course). I was trying out Iron Man 2 trailer. Remember to reboot after install though. Hope this is what you're looking for. - randywaterhouse - 2010-08-21 Wow, I just switched my installed BCM70012 with my new BCM70015, upgraded to crystalhd-for-osx-2.0.1 (r145) and XBMC r33004 and watched two 720p MKVs...without a glitch. Haven't checked 1080p yet, but I'm sure it'll be awesome :-) Kudos to Davilla and everybody else involved, thank you so much for your great work and effort, it's much appreciated. And if I ever get near any of you guys, beer is on me! Best, Randy. :-) - muelli - 2010-08-22 hello ds, thanks for your reply. installed 2.0.1 crystals and tryed to get latest nightly r33035 after downloading, errormessage : md5 sums don't match, please try to redownload. if this message still appears after download, updates have changed. This should be corrected automatically in a few hours, if not plese file an issue at ..... all together, i am sure with a new xbmx nighty i will be able to play my movies :-) regards muelli - ds129 - 2010-08-22 muelli Wrote:hello ds, How's it going for you? I upgraded to 33035 today, but sadly, it's freezing up ATV during 1080p playback like the previous version before 33004. Any problems you encountered? - davilla - 2010-08-22 ds129 Wrote:How's it going for you? I upgraded to 33035 today, but sadly, it's freezing up ATV during 1080p playback like the previous version before 33004. Any problems you encountered? dmesg, xbmc.log, etc. not very smooth today - muelli - 2010-08-22 hello davilla and forum, today i upgraded to lastest night build, which works now. but, what should i say, not very smoothly. the movie is playing like no crystal card build in. davilla, could you please post what you need and where i can find your needed information? a small tut how to collect the needed informations for debuging for your team? this will help to make "good" posts with all debug information needed. by the way, could you please post a donation link or something? regards muelli PS: how the hell could i upload my logs? or where....? i think upload will be better than copy&pasting hole logs to the post.... - davilla - 2010-08-22 muelli Wrote:hello davilla and forum, http://www.pastebin.com We already have many sticky threads and guides about what we need, anymore is thread spew. The front page http://www.xbmc.org has a donation link as does crystalhd-for-osx. - Raider - 2010-08-22 was trying to watch this wrc event this morning and it's crashed xbmc and restarted my atv twice... i could get about 10 minutes through each time before the atv would restart. these files would play fine on the 31XXX and prior builds... watched a couple 720 movies last night with super minor stutter... quick 1/2 second pause every 20 minutes or so... ATV-OS svn: 33004 crystalhd 2.0.1 old style broadcom card media info: http://pastebin.com/d8dC4t7N console log (dated the 15th for some reason): http://pastebin.com/TK2STiUk Crash log (january of this year?): http://pastebin.com/sZMTZej1 - davilla - 2010-08-22 Raider Wrote:was trying to watch this wrc event this morning and it's crashed xbmc and restarted my atv twice... i could get about 10 minutes through each time before the atv would restart. these files would play fine on the 31XXX and prior builds... crashreport.log appends, so you have to look at the end. It helps to delete this periodically. I see a frontrow, two perian and an XBMC crash using a very old version. please try the crystalhd-for-osx-test1.zip version. - Raider - 2010-08-22 davilla Wrote:crashreport.log appends, so you have to look at the end. It helps to delete this periodically. I see a frontrow, two perian and an XBMC crash using a very old version. I'm grabbing day 2 right now of the wrc event, so I'll delete the crashreport.log and update to the test1 file and svn before i watch it... i also had this same problem watching a revision3/hdnation 720p .mp4 video last week... it restarted my atv, but it was so late at night i just went to bed... my logfiles - muelli - 2010-08-22 Hello all, my xbmc.log is located here: http://pastebin.com/w3H3WkjJ my crashreporter log is here: http://pastebin.com/vVFd3thy anything else? Please take a look at the xbmc paypal account.... :-) PS: i have no consolelog ?! - davilla - 2010-08-22 muelli Wrote:Hello all, dmesg - davilla - 2010-08-22 now everyone gets to update their guides crystalhd-for-osx tagged at r156 for crystalhd-for-osx-3.6.0. - sulfie - 2010-08-22 davilla Wrote:now everyone gets to update their guides crystalhd-for-osx tagged at r156 for crystalhd-for-osx-3.6.0. upgraded my apple tv... so far so good. 1080p stuttered for the first few seconds, but played fine after that. Thanks davilla :-( - muelli - 2010-08-22 Hello all, upgraded but no success: Symtoms: video and sound not sync. I am not sure if it is my video, but the testvideo here http://code.google.com/p/crystalhd-for-osx/downloads/detail?name=test_video.264&can=2&q= did not work also. -bash-2.05b$ sudo dmesg | grep -i crystal Password: BroadcomCrystalHD:tart crystalhd_hw_open: setting up functions, device = Link Starting Crystal HD Device Stopping Crystal HD Device BroadcomCrystalHD: Found HW and started driver SW. crystalhd_hw_open: setting up functions, device = Link Starting Crystal HD Device BroadcomCrystalHD opened crystalhd_link_download_fw entered crystalhd_link_do_fw_cmd entered -bash-2.05b$ -bash-2.05b$ grep -i crystal /Users/frontrow/Library/Logs/xbmc.log 19:33:59 T:2684407808 M: 52559872 DEBUG: SECTION:LoadDLL(libcrystalhd.dylib) 19:33:59 T:2684407808 M: 52482048 DEBUG: Loading: libcrystalhd.dylib 19:34:01 T:2684407808 M: 15032320 DEBUG: CrystalHD(new API): device opened 19:35:10 T:51767296 M: 16719872 DEBUG: CDVDFactoryCodec: compiled in hardware support: VDADecoder:yes CrystalHD:yes OpenMax:no 19:35:10 T:51767296 M: 16719872 INFO: Trying Broadcom Crystal HD Decoder... 19:35:10 T:51767296 M: 16719872 DEBUG: CrystalHD: profile 640029 19:35:10 T:51767296 M: 16719872 DEBUG: CrystalHD: nal size 4 19:35:10 T:51767296 M: 16719872 DEBUG: CrystalHD: num sps 1 19:35:10 T:51767296 M: 16719872 DEBUG: CrystalHD: data size at end = 0 19:35:10 T:51700736 M: 16195584 DEBUG: CrystalHD: Output Thread Started... 19:35:10 T:51767296 M: 16195584 INFO: DVDVideoCodecCrystalHD: Opened Broadcom Crystal HD Codec 19:35:11 T:51700736 M: 10612736 DEBUG: CrystalHD: Format Change Detected. Flag s: 0x00030000 19:35:11 T:51700736 M: 10604544 DEBUG: CrystalHD: dec_par x = 1, dec_par y = 1 19:35:11 T:51700736 M: 10604544 DEBUG: CrystalHD: resolution = 0 interlace = 0 19:35:36 T:51700736 M: 11472896 DEBUG: CrystalHD: Output Thread Stopped... 19:35:42 T:52387840 M: 18169856 DEBUG: CDVDFactoryCodec: compiled in hardware support: VDADecoder:yes CrystalHD:yes OpenMax:no 19:35:42 T:52387840 M: 18165760 INFO: Trying Broadcom Crystal HD Decoder... 19:35:42 T:51844096 M: 18006016 DEBUG: CrystalHD: Output Thread Started... 19:35:42 T:52387840 M: 18001920 INFO: DVDVideoCodecCrystalHD: Opened Broadcom Crystal HD Codec 19:35:42 T:51844096 M: 14450688 DEBUG: CrystalHD: Format Change Detected. Flag s: 0x00030000 19:35:42 T:51844096 M: 14446592 DEBUG: CrystalHD: dec_par x = 1, dec_par y = 1 19:35:42 T:51844096 M: 14446592 DEBUG: CrystalHD: resolution = 0 interlace = 0 19:36:54 T:51844096 M: 18386944 DEBUG: CrystalHD: Output Thread Stopped... still no console log. How can i enable the console log? any ideas? regards muelli PS: did you recieved a donation from H. B.? |