[LINUX] Asrock remote with Ubuntu 11.04 (Natty) - Printable Version +- Kodi Community Forum (https://forum.kodi.tv) +-- Forum: Support (https://forum.kodi.tv/forumdisplay.php?fid=33) +--- Forum: General Support (https://forum.kodi.tv/forumdisplay.php?fid=111) +---- Forum: Linux (https://forum.kodi.tv/forumdisplay.php?fid=52) +---- Thread: [LINUX] Asrock remote with Ubuntu 11.04 (Natty) (/showthread.php?tid=99366) |
[LINUX] Asrock remote with Ubuntu 11.04 (Natty) - Dion71 - 2011-04-15 Hi, With the latest Ubuntu (11.04 beta1) the Asrock remote now works out of the box, no LIRC needed anymore (yeah!) However, only a few buttons on the remote are recognized. Does anybody know how to configure XBMC to use the right keymap in Ubuntu 11.04? - sraue - 2011-04-15 Dion71 Wrote:Hi, run lirc-0.9.0 with devinput config, then it should work. a really great alternative is using eventlircd. - Novin - 2011-04-29 Dion71, could you please post your Lircmap.xml? I don't get my remote to work at all after upgrade to 11.04. I tried in XBMC 10.1 with no user-configured Lircmap.xml, only the default in /usr/share/.. Remote only works with ir-keytable but that's it AFAIK. $ sudo chmod 666 /dev/input/event4 $ ir-keytable Found /sys/class/rc/rc0/ (/dev/input/event4) with: Driver nuvoton-cir, table rc-rc6-mce Supported protocols: NEC RC-5 RC-6 JVC SONY LIRC Enabled protocols: NEC RC-5 RC-6 JVC SONY LIRC Repeat delay = 500 ms, repeat period = 33 ms $ ir-keytable -t Testing events. Please, press CTRL-C to abort. 1304107612.390362: event MSC: scancode = 800f241f 1304107612.513385: event MSC: scancode = 800f241f 1304107613.161091: event MSC: scancode = 800f241e 1304107613.284564: event MSC: scancode = 800f241e 1304107613.706064: event MSC: scancode = 800f241f 1304107613.829108: event MSC: scancode = 800f241f 1304107614.138192: event MSC: scancode = 800f241e 1304107614.261659: event MSC: scancode = 800f241e (those events are generated when pressing buttons on the remote) |