2010-03-22, 15:21
Thanks, I'll give that a try. The issue is if irw was working, it would give me the remote information i need to populate the hardware.conf and then irrecord to populate the lircd.conf, but i can't get irw to work right.
Th3R00st3r Wrote:Thanks, I'll give that a try. The issue is if irw was working, it would give me the remote information i need to populate the hardware.conf and then irrecord to populate the lircd.conf, but i can't get irw to work right.
media@htpc:~$ irw
0000000077e12069 00 OK htpc-harmony
0000000077e12069 01 OK htpc-harmony
0000000077e12069 02 OK htpc-harmony
0000000077e12069 03 OK htpc-harmony
sudo lsusb
Bus 002 Device 002: ID 0471:0815 Philips eHome Infrared Receiver
sudo irrecord -d /dev/lirc0 /etc/lirc/mce360.conf
sudo cp /etc/lirc/mce360.conf /etc/lirc/lircd.conf
REMOTE="Microsoft_Xbox360"
REMOTE_MODULES="lirc_dev lirc_mceusb2"
REMOTE_DRIVER=""
REMOTE_DEVICE="/dev/lirc0"
REMOTE_LIRCD_CONF=""
REMOTE_LIRCD_ARGS=""
TRANSMITTER="None"
TRANSMITTER_MODULES=""
TRANSMITTER_DRIVER=""
TRANSMITTER_DEVICE=""
TRANSMITTER_LIRCD_CONF=""
TRANSMITTER_LIRCD_ARGS=""
START_LIRCD="true"
START_LIRCMD=""
LOAD_MODULES=""
LIRCMD_CONF=""
FORCE_NONINTERACTIVE_RECONFIGURATION="false"
# Please make this file available to others
# by sending it to <[email protected]>
#
# this config file was automatically generated
# using lirc-0.8.4a(default) on Mon Mar 22 23:38:55 2010
#
# contributed by
#
# brand: /etc/lirc/mce360.conf
# model no. of remote control:
# devices being controlled by this remote:
#
begin remote
[i]name Microsoft_Xbox360[/i]
bits 13
flags RC6|CONST_LENGTH
eps 30
aeps 100
header 2677 858
one 456 424
zero 456 424
pre_data_bits 24
pre_data 0x1BFF80
gap 106120
min_repeat 1
toggle_bit_mask 0x8000
rc6_mask 0x100000000
begin codes
open 0x0BD7
backskip 0x0BE4
rewind 0x0BEA
stop 0x0BE6
pause 0x0BE7
fastforward 0x0BEB
skipforward 0x0BE5
display 0x0BB0
back 0x0BDC
dvdmenu 0x0BDB
title 0x0BAE
info 0x0BF0
up 0x0BE1
right 0x0BDE
down 0x0BE0
left 0x0BDF
ok 0x0BDD
y 0x0BD9
x 0x0B97
a 0x0B99
b 0x0BDA
volumeup 0x0BEF
volumedown 0x0BEE
mute 0x0BF1
channelpageup 0x0B93
channelpagedown 0x0B92
start 0x0BF2
enter 0x0BF4
record 0x0BE8
inputclear 0x0BF5
1 0x0BFE
2 0x0BFD
3 0x0BFC
4 0x0BFB
5 0x0BFA
6 0x0BF9
7 0x0BF8
8 0x0BF7
9 0x0BF6
0 0x0BFF
100 0x0BE2
return 0x0BE3
end codes
end remote
sudo irw
sudo reboot
roberto99 Wrote:Hi all, I am trying to setup the exact same setup (usb-uirt and harmony one advancet remote) but had no luck so far. Could someone post me the 2 files used for a successful setup? Thanks in advance, cheers, Roberto
roberto99 Wrote:really nobody?
roberto99 Wrote:roberto@ubu910dexbmctest:~$ sudo lircd -n -d /dev/ttyUSB0 -H usb_uirt_raw /usr/share/lirc/remotes/mceusb/lircd.conf.mceusb
[sudo] password for roberto:
lircd: there seems to already be a lircd process with pid 1231
lircd: otherwise delete stale lockfile /var/run/lirc/lircd.pid
roberto@ubu910dexbmctest:~$
roberto99 Wrote:I did
roberto@ubu910dexbmctest:~$ sudo killall lircd
roberto@ubu910dexbmctest:~$ sudo mode2 -d /dev/ttyUSB0 -H usb_uirt_rawmode2: uirt2_raw: checksum error
mode2: uirt2_raw: UIRT version 0905 ok
does that mean that the remote codes being received don't match up to the config file?