2011-12-27, 05:23
Yes, sounds right. Meanwhile, have a look at this forum and see if something there helps you.https://discussions.apple.com/thread/258...5&tstart=0
2011-12-27, 07:55
activate Wrote:Yes, sounds right. Meanwhile, have a look at this forum and see if something there helps you.https://discussions.apple.com/thread/258...5&tstart=0
Except I don't seem to have this issue on my other Mac mini with XBMC Eden-Beta1 directly connected to a D8000 55" Samsung LED TV. The problem shows up with the unit connected to the Onkyo TX-NR809 into a D8000 64" Samsung Plasma TV.
Also, there is no consistency with this issue.
Randy
2011-12-28, 01:14
Yes I know, its just that there are various tips people have used in there that I thought one of them may resolve this issue as well. I have almost an identical setup to yours with the macmini including the samsung plasma (be not that big 
). Same inconsistency but what occurs predictably is:
1. If I launch another application that is to use the hdmi sound (eg. eye tv or air server) whilst xbmc is playing a video or in paused mode then the second application will default to internal speakers.
2. After stopping a video, the skins sounds go to internal speakers and starting a movie take then back to hdmi.
I'll try a few tips and tricks in that list and see if I have any luck.
). Same inconsistency but what occurs predictably is:1. If I launch another application that is to use the hdmi sound (eg. eye tv or air server) whilst xbmc is playing a video or in paused mode then the second application will default to internal speakers.
2. After stopping a video, the skins sounds go to internal speakers and starting a movie take then back to hdmi.
I'll try a few tips and tricks in that list and see if I have any luck.
2011-12-28, 05:51
davilla Wrote:My Denon AVR-1912 does not show this issue at all and I've switched it via xbmc hundreds of times in working on this code.
I'll ask again for an xbmc.log. Lacking that, there's nothing more I can do.
New pastebin url, the other had expired: http://pastebin.com/H3dM1Ffu
Randy
2011-12-31, 03:50
davilla Wrote:try this one http://dl.dropbox.com/u/14341410/XBMC.zip, eta 16 mins from now.
Same issue.
Randy
2011-12-31, 10:35
davilla Wrote:xbmc.log please.
With or without debugging turned on?
Randy
2011-12-31, 17:33
repstein Wrote:With or without debugging turned on?
Randy
Debugging turned on or it is useless for me.
Just to be clean, there are two issues being chased in this thread, 1) GUI audio not sticking to HDMI and 2) audio output getting broked after switch when doing passthough over HDMI. Which is your issue again ?
2011-12-31, 23:07
davilla Wrote:Debugging turned on or it is useless for me.
Just to be clean, there are two issues being chased in this thread, 1) GUI audio not sticking to HDMI and 2) audio output getting broked after switch when doing passthough over HDMI. Which is your issue again ?
I'll provide the debug in a little bit or tomorrow if that's OK. Experiencing 1 and 2 and a 3rd issue. Usually when the above happens, it starts playing in slow motion. Would you like me to capture a video of what's happening?
Randy
2011-12-31, 23:51
repstein Wrote:I'll provide the debug in a little bit or tomorrow if that's OK. Experiencing 1 and 2 and a 3rd issue. Usually when the above happens, it starts playing in slow motion. Would you like me to capture a video of what's happening?
Randy
2) leads to video playing in slow motion. what you see is the amp's ac3/dts indicator blinking on/off fast like it can't quite get a lock.
2012-01-02, 22:41
davilla taps the microphone... need feedback here less I get bored and turn to sometime else to fix. Once I do that, this goes to the bottom of the pile
2012-01-02, 22:45
OK OK.. sorry, been sick. On it.
Thanks for your attention though.
Randy
Thanks for your attention though.
Randy
2012-01-02, 23:25
davilla Wrote:davilla taps the microphone... need feedback here less I get bored and turn to sometime else to fix. Once I do that, this goes to the bottom of the pile
Let's try this again.
http://pastebin.com/crhMJJBv
This is running the build you sent me the other day.
Randy
