(2012-04-05 22:29)DDDamian Wrote: Okay - new build up. Direct link XBMC-AE-20120406.zip or link from first post and check newest date.
- use old-style WAVEFORMATEXTENSIBLE structure for backwards compatibility
- use WAVE_FORMAT_DOLBY_AC3_SPDIF format for backwards compatibility
- fix DTS breakage - works on my setup with DTS, DTS-HD (24/96) and DTS-MA
- fix double sink opening for quicker skip/seek and hopefully no receiver switching from encoded->pcm
- fix buffer sizing in CSoftAEStream
- add dynamic Stereo to All Channels upmix for stereo music/videos
- fix crash on deselecting MultiChannelLPCM capable receiver button
- a few other invisible tweaks
Tested on just about all formats on my setup:
Win 7 x64 Premium
ATI HD6450 GPU
Catalyst drivers 12.1 w/AMD High Definition Device Driver 184.108.40.20605 12/06/2011
HDMI to Denon 3808CI
Tested: AC3 2.0/5.1, DTS 5.1, DTS-HD 24/96, DTS-MA, AAC, TrueHD, mp3 video soundtracks
Tested: mp3, FLAC stereo and m/c from 2.0 16/44.1 to 5.1 24/96
I am using WASAPI, exclusive mode, HDMI, 7.1 channels. Just about any video settings have worked fine.
Note: please start with your audio buffer size around 50msec - I set the default a bit high and found it can overrun buffers on high-bitrate audio - I'll fix that in the next build. For now just go to the Audio Output settings page and reduce it to 50msec to start, higher only if required.
As always, full debug logs with any issue - all feedback, good and bad is welcome!
I have been using xbmc 10.1 for a year now and always had sync problems with 24p dts tracks about -200ms but only when using sync display to soruce file. All other videos work perfectly in 24p with audio other than dts. If I switch sync display to soruce to off and plays everything in 60hz I get no problems at all.
I was wondering if this is all fixed in your new hd audio build ?
The funny thing is I have the same setup as you
Windows 64bit pro with 4gig of memory
Cpu: intel i3 3.3ghz sandy bridge chip
GFX Card: Sapphire 6570 1GB Passive with 12.1 drivers
Cheers I want to try it but I am scared that it my screw up my setup