[Windows] AudioEngine testers - Windows platform only

(2012-06-21 08:31)steelman1991 Wrote:  

(2012-06-20 22:34)thrak76 Wrote:  I keep trying to install Damian's "AE-final" build linked in the OP, but I can never successfully launch XBMC. It just crashes before getting anywhere, and generating a crash-log.

How do I go about posting a crash-log to help diagnose my issues?

Why not just try one of the nightly builds - AE has been included in them since early May - or is there a particular reason you want to use that build?

I've had either the same crashing problems, or another error with a "side by side configuration" message after installation (or something) with the nightlies, as when i tried to install the AE-final build. I can install and run the Eden final the HD patch fine. Well, there are some problems but I won't discuss those here.

I had to do a clean OS install after a disk failure and have had nothing but problems trying to get xbmc running smooth again...

That's a pity - seems to be hit or miss for some users - mine has been rock solid since early May to the extent that I haven't touched the installation since.

This thread has to some degree become unsupported since the introduction of nightly builds (with the inclusion of AE). My suggestion would be to download attempt install and then look for support in the sticky on the windows forums - I think it was DDDamians intention to support that thread and let this one slide.

Will there be Dolby ProLogic IIx decoding in the future?

Hi,
Have some troubles with XBMC AE. My reciver is an ONKYO and the sound works fine for a week ago. But now I dont get any sound att all in XBMC,
I only get error in log:
22:15:31 T:3424 ERROR: CAESinkWASAPI::InitializeExclusive: Unable to initialize WASAPI in exclusive mode -2147024809 - (E_INVALIDARG).
22:15:31 T:3424 ERROR: CAESinkWASAPI::Initialize: WASAPI initialization failed.
22:15:32 T:3424 ERROR: CAESinkWASAPI::InitializeExclusive: Unable to initialize WASAPI in exclusive mode -2147024809 - (E_INVALIDARG).
22:15:32 T:3424 ERROR: CAESinkWASAPI::Initialize: WASAPI initialization failed.
22:15:43 T:216 WARNING: CDVDMessageQueue(audio)::Get - asked for new data packet, with nothing available

The whole log is here:
http://pastebin.com/xQMKDSBp

Thanks for help

hi all...
i have an issue with just installed nightly and audioengine..
when enabling hdmi with 2.0 speakers and only AC3 enabled
audio out to directsound:hdmi
audio out passthrough to: directsound:SPDIF

I have only sound on my panasonic receiver (via SPDIF) but not on my panasonic TV

when disabling AC3 and keeping the other settings as is i have only sound on my TV but not on the receiver...

any thoughts?

Is anybody testing how's AE working with analog outputs?

@knight2000 : yes, with a M-Audio Revolution 5.1 sound card, set up with 192 000kHz output.
It work great, in Wasapi and DirectSound. Why?

Hi all, having issues again when playing any mp3 file i get no audio any ideas on how to fix this? cheers

pastebin log

(2012-07-05 15:04)lndiana Wrote:  @knight2000 : yes, with a M-Audio Revolution 5.1 sound card, set up with 192 000kHz output.
It work great, in Wasapi and DirectSound. Why?

I ask because i tried one of the recent builds and sound did work but the speaker mapping was not right. Like on a 7.1 configuration xbmc was playing 7.1 test files as a 5.1 setup meaning side tracks and rear tracks were being played thru the side speakers. Windows is setup as 7.1 so its xbmc, so makes me wonder :/

PS: The Test track is from http://www.demo-world.eu/trailers/high-d...ailers.php and its named hd_dts_hd_master_audio_sound_check_7_1_lossless

(2012-07-06 08:50)knight2000 Wrote:  

(2012-07-05 15:04)lndiana Wrote:  @knight2000 : yes, with a M-Audio Revolution 5.1 sound card, set up with 192 000kHz output.
It work great, in Wasapi and DirectSound. Why?

I ask because i tried one of the recent builds and sound did work but the speaker mapping was not right. Like on a 7.1 configuration xbmc was playing 7.1 test files as a 5.1 setup meaning side tracks and rear tracks were being played thru the side speakers. Windows is setup as 7.1 so its xbmc, so makes me wonder :/

PS: The Test track is from http://www.demo-world.eu/trailers/high-d...ailers.php and its named hd_dts_hd_master_audio_sound_check_7_1_lossless

please poste log file