2011-09-29, 21:57
jawilljr Wrote:Sorry didn't see your post.
I don't like this:
Code:xbmc@XBMCLive:~$ grep eld_valid /proc/asound/NVidia/eld*
grep: /proc/asound/NVidia/eld*: No such file or directory
Are you using the probe_mask still? If so the comment out that line by putting a '#' in front of it and reboot.
Then show the output of this again:
Code:grep eld_valid /proc/asound/NVidia/eld*
It should show something like this:
Code:/proc/asound/NVidia/eld#0.0:eld_valid 0
/proc/asound/NVidia/eld#1.0:eld_valid 0
/proc/asound/NVidia/eld#2.0:eld_valid 0
/proc/asound/NVidia/eld#3.0:eld_valid 1
Yours will probably only have one line. What we are looking for is a one at the end of the line.
Jerry
I had already pulled out the probe_mask and rebooted earlier and I still get the same error with the no such file or directory on the eld*?
This is all that is under the /proc/asound/NVidia/ filesystem, nothing to do with eld at all?
Code:
dr-xr-xr-x 3 root root 0 2011-09-29 14:57 pcm3p
dr-xr-xr-x 3 root root 0 2011-09-29 14:57 pcm1p
dr-xr-xr-x 4 root root 0 2011-09-29 14:57 pcm0p
dr-xr-xr-x 4 root root 0 2011-09-29 14:57 pcm0c
-rw-r--r-- 1 root root 0 2011-09-29 14:57 oss_mixer
-r--r--r-- 1 root root 0 2011-09-29 14:57 id
-r--r--r-- 1 root root 0 2011-09-29 14:57 codec#3
-r--r--r-- 1 root root 0 2011-09-29 14:57 codec#0
This is how my /etc/asound.conf looks:
Code:
pcm.!hdmi-remap {
type asym
playback.pcm {
type plug
slave.pcm "hdmi"
}
}
pcm.!hdmi {
type route
slave.pcm "hw:0,3"
ttable {
0.0= 1
1.1= 1
2.4= 1
3.5= 1
4.2= 1
5.3= 1
}
}
This is how my ~home/.asoundrc looks:
Code:
xbmc@XBMCLive:~$ vi .asoundrc
pcm.!hdmi-remap {
type asym
playback.pcm {
type plug
slave.pcm "hdmi"
}
}
pcm.!hdmi {
type route
slave.pcm "hw:0,3"
ttable {
0.0= 1
1.1= 1
2.4= 1
3.5= 1
4.2= 1
5.3= 1
}
}