TVHeadend - Access denied

TBR-Hannover · 2011-06-15 15:44

Hi,

I'm trying to use XBMC with TVHeadend and can't get Live-TV running. Both XBMC and TVHeadend are installed out of the pvr-ppa from dushmaniac.
I entered the user and password given during the installation but when I try to switch on Live-TV the message "Access denied" appears.
TVHeadend is running and I can record shows via the webinterface.
Unfortunately I can't add a new user in the webinterface of tvheadend. After a few seconds the message "Transaction aborted" appears and nothing happenens.
Some months ago I had the same constallation and everything worked fine.

Thanks for helping and kind regards!

System: ubuntu 10.04.2 command-line system, pvr-ppa (opdenkamp)

**opdenkamp** · 2011-06-16 10:41

you'll have to add an entry for your xbmc in the tvheadend's acl: http://www.lonelycoder.com/hts/tvheadend...index.html

TBR-Hannover · 2011-06-16 10:50

I tried, but "Transaction aborted" is the only message I get. But should not using the user/password entered during the installation work as well?

**opdenkamp** · 2011-06-16 11:21

think that one should be usable too, but it might only have web interface rights.
the "transaction aborted" message is a bug in the webui. press F5, and the new entry should appear in the list.

TBR-Hannover · 2011-06-16 12:14

thank you for the information, I'll try that at home in the evening.

TBR-Hannover · 2011-06-16 20:22

Thanks a lot! Finally it works Smile

Via the ACL in the Web-UI I added a user spezific for my XBMC/HTPC, entered user/password in the configuration-dialog in xbmc and... I am totally satisfied!

The journey goes on.

schweineohr · 2011-08-14 13:53

Hi, I just installed xbmc-live and all the needed software, so far it works fine, but it seems the worst case catched me. I tried to reach the webinterface by IP adress of the htpc:9981 so far no prob. but when I place the login data and press ENTER the fields are blank again. What can I do to reach the Web Gui?

**opdenkamp** · 2011-08-14 19:55

no idea what went wrong there
try

Code:

sudo dpkg-reconfigure tvheadend

sudo /etc/init.d/tvheadend restart

mrrepel · 2011-08-22 11:12

Hi all,

I am not trying to hyjack your topic but with the latest XBMC release https://github.com/opdenkamp/xbmc/co...b...5c6848a37b the following problem:
- TVheadend connected / disconnected / reconnected
This happens at startup, several times. 1 out 3 times i can watch live TV. During Live TV this happens random, i get the message but can watch TV (without hickups ).
With the odk44 release on another client i dont have problems.

Also the loading of the channels and EPG can take up to a minute. Somethimes less than a second, but also up to a minute.

Greetz

MrRepel

**opdenkamp** · 2011-08-22 13:03

but you are highjacking this topic Smile

please create a ticket for this issue and attach a full debug log

TBR-Hannover Junior Member Posts: 10 Joined: Mar 2011 Reputation: 0 Location: Hannover, germany	2011-06-16 10:50 Post: #3 I tried, but "Transaction aborted" is the only message I get. But should not using the user/password entered during the installation work as well?
	find

TBR-Hannover Junior Member Posts: 10 Joined: Mar 2011 Reputation: 0 Location: Hannover, germany	2011-06-16 12:14 Post: #5 thank you for the information, I'll try that at home in the evening.
	find

TBR-Hannover Junior Member Posts: 10 Joined: Mar 2011 Reputation: 0 Location: Hannover, germany	2011-06-16 20:22 Post: #6 Thanks a lot! Finally it works Via the ACL in the Web-UI I added a user spezific for my XBMC/HTPC, entered user/password in the configuration-dialog in xbmc and... I am totally satisfied! The journey goes on.
	find

schweineohr Junior Member Posts: 38 Joined: Jun 2011 Reputation: 0	2011-08-14 13:53 Post: #7 Hi, I just installed xbmc-live and all the needed software, so far it works fine, but it seems the worst case catched me. I tried to reach the webinterface by IP adress of the htpc:9981 so far no prob. but when I place the login data and press ENTER the fields are blank again. What can I do to reach the Web Gui?
	find