2011-08-07, 11:41
Hello everyone,
I hope very much, you could help me with the following problem:
I'm trying to set the sound-output to hdmi and audio jack both the same time, but it wont work
Would be great, if someone could help me.
Greetings
Limx
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Generic [HD-Audio Generic], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
.asoundrc
speaker-test
speaker-test 1.0.23
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
[...]
I hope very much, you could help me with the following problem:
I'm trying to set the sound-output to hdmi and audio jack both the same time, but it wont work
Would be great, if someone could help me.
Greetings
Limx
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Generic [HD-Audio Generic], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
.asoundrc
Code:
pcm.!default {
type plug
slave {
pcm "both"
}
}
pcm.both {
type route
slave {
pcm multi
channels 6
}
ttable.0.0 1.0
ttable.1.1 1.0
ttable.0.2 1.0
ttable.1.3 1.0
ttable.0.4 1.0
ttable.1.5 1.0
}
pcm.multi {
type multi
slaves.a {
pcm "tv"
channels 2
}
slaves.b {
pcm "receiver"
channels 2
}
slaves.c {
pcm "analog"
channels 2
}
bindings.0.slave a
bindings.0.channel 0
bindings.1.slave a
bindings.1.channel 1
bindings.2.slave b
bindings.2.channel 0
bindings.3.slave b
bindings.3.channel 1
bindings.4.slave c
bindings.4.channel 0
bindings.5.slave c
bindings.5.channel 1
}
pcm.tv {
type hw
card 0
device 3
channels 2
}
pcm.receiver {
type hw
card 0
device 3
channels 2
}
pcm.analog {
type hw
card 1
device 0
channels 2
}
speaker-test
speaker-test 1.0.23
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
Playback open error: -16,Device or resource busy
[...]