[Lejla]

Hi to all
Please help me, I very angry because I got all hardware for building XBMC and nothing works, I got problem at first with AMD gfx driver issue and now I can't hear any sound.
Please can somebody tell me how I can listen sound over HDMI.
I have "ASRock A75M-ITX" and CPU "A6-3500 (3x2.1Ghz/2.4Ghz) + HD6530D".
Please can somebody help me.
What setting I need to do?
Please!!!!!!!
Lejla

[Lejla]

Finally I will buy new hardware, the hardware I have, I will throw it in the trash.
Could somebody can tell me which hardware works with XBMC Live?

[giftie]

Finally I will buy new hardware, the hardware I have, I will throw it in the trash.
Could somebody can tell me which hardware works with XBMC Live?

NVidia has really good support in Live. GT210-240 are fairly low priced and work well @ 1080p. Any Motherboard and processor should be fine. I'm personnaly only using an older single core AMD.

[publicENEMY]

Hi to all
Please help me, I very angry because I got all hardware for building XBMC and nothing works, I got problem at first with AMD gfx driver issue and now I can't hear any sound.
Please can somebody tell me how I can listen sound over HDMI.
I have "ASRock A75M-ITX" and CPU "A6-3500 (3x2.1Ghz/2.4Ghz) + HD6530D".
Please can somebody help me.
What setting I need to do?
Please!!!!!!!
Lejla

i have the exact same hardware as you. use latest unstable openelec and all should be working. openelec footprint is very small. theres no need to waste money.

[Lejla]

Hi Public Enemy, can you tell me please, what your Audio settings are?
I install OpenElec Version "stable (1.0) - 1.0.2 Fusion i386 (104 MB)"
"OpenELEC-Fusion.i386-1.0.2.tar.bz2" and HDMI didn't work for me?
Thank you.
Lejla

[cank]

I had same problem when first setting up my Gigabyte MA785GM-US2H.
I went into the settings for sound and changed:
Audio Output - HDMI
Output device -HDA ATI HDMI hdmi
Passthrough Device - iec958

I don't know what all of these settings are and I assume your Motherboard has a different sound controller, so just try each option until it works.

I believe you have to exit out of the settings screen for changes to take effect because at first I would change a setting then use my iPhone to start the movie again and nothing worked until I actually closed the sound settings window then resumed the movie from my iPhone.

Hope this helps. Sorry, I'm a noobie too.

[fmanders]

Maybe a late response but hopefully this will help someone else with the same problem.

I have the exact same setup and i did the following :
Audio Output - Analog
Output device - Custom - plughw:0,3

you can check the 0,3 by ssh'ing to the box and typing aplay -l
-----
card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 0/1
Subdevice #0: subdevice #0
-----

card 0, device 3 : 0,3