Login at Kodi Home

Cruzy · 2012-02-29, 21:20

hi,

I have a problem with my movies in 25fps, Xmbc chose the bad frequency (50hz)

TV : philips 42PFL8684H/12
proc : 2500k
CM : ASUs p8h67-m evo maintenant un gigabytes Z68 ma d2H
DD : ssd 40go (2x 2TO caviar green)
ram : corsair ddr3 4go
alim : standard 480w
BOITIER : Antec NSK2480

version seven 64bits + XBMC eden beta 2 + driveur GPU intel 2500k a jour (8.15.2618)

sorry for my english Confused

jhsrennie · 2012-03-01, 11:30

Enable debug logging from System settings, System, Debugging, and restart XBMC then wait a minute or two for all the startup tasks to finish. Now play the film that's giving the problem for a minute or two, then stop the film and close XBMC.

Open the debug log by pressing Windows-R and in the Run dialog type:

"%appdata%\xbmc\xbmc.log"

(including the quotes). Click OK and the log should open in Notepad. Copy and paste the log into http://pastebin.com/ and post the link it gives you here.

JR

**ashlar** · 2012-03-01, 11:32

If XBMC chooses 50Hz for 25fps material it's not chosing the wrong frequency.

As a clear multiple of 25, 50Hz will allow for smooth playback and a more stable image (usually it's at least doubled to 100Hz by TVs, by the way).

Cruzy · 2012-03-01, 20:55

the link : http://pastebin.com/b3Z4CiY5

the txt in dowload : Voir le Fichier : logxbmc.txt

i know As a clear multiple of 25, 50Hz will allow for smooth playback and a more stable image (usually it's at least doubled to 100Hz by TVs, by the way).

but in 25hz > no lag, the image is fluid (test with kmplayer and mediportal)
in 50hz > lags, (not "fluid" in english ?)

thanks !!

Cruzy · 2012-03-02, 19:27

Need help pleas thanks

Nod

jhsrennie · 2012-03-02, 20:04

I note you're using windowed fullscreen. You could try using true fullscreen instead. Go to System settings, System, Video output and disable the setting "Use a fullscreen window rather than true fullscreen".

JR

Cruzy · 2012-03-03, 08:35

same problème
There is not an edit file has to choose its frequency?

thank you

thespecialist · (This post was last modified: 2012-03-07, 01:40 by thespecialist.)

*edit*

Cruzy · 2012-03-04, 17:04

it doesn't work, always the same problems
i have installing Eden RC2

23hz > ok the movies stay in 23Hz
25hz > bad the movies go to in 50hz P

I don't know what to do to make it work
why the frequency isn't only remains in 25Hz Progressive?

Cruzy · 2012-03-05, 18:15

no solution ??

**Hitcher** · 2012-03-05, 18:33

Try overriding the refresh rate using advanced settings -

http://wiki.xbmc.org/index.php?title=Adv...3Cvideo.3E

Cruzy · 2012-03-05, 19:27

THANKS THANKS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Laugh

IT WORKS MY XML :

<advancedsettings>
<video>
<adjustrefreshrate>
<override>
<fpsmin>24.9</fpsmin>
<fpsmax>25.1</fpsmax>
<refreshmin>24.9</refreshmin>
<refreshmax>25.1</refreshmax>
</override>
</adjustrefreshrate>
</video>
</advancedsettings>

pro510 · 2012-03-06, 05:42

thespecialist Wrote:I think this might be the same issue that I'm experiencing http://trac.xbmc.org/ticket/12726). Try and see if my solution also works for you (please let me know)

1) Install the latest XBMC version (RC2) -> http://mirrors.xbmc.org/releases/win32/x...en_rc2.exe
2) Replace xbmc.exe in your xbmc map (usually under C:\Program Files (x86)\XBMC) with this build I compiled: http://speedy.sh/M7TPV/XBMC.rar

Thanks !

I am getting something very similar. Using Eden RC2, 25Hz material judders. For me the judder doesn't always happen. When it is juddering I can pause the playback then restart and it plays smoothly again. Debug log doesn't show anything to do with video, but does show dropped packets on audio stream.

Unfortunately I tried your fix but it didn't make a difference.

I never had any issues with Dharma.

Thanks,
Graham

thespecialist · (This post was last modified: 2012-03-07, 01:42 by thespecialist.)

pro510 Wrote:I am getting something very similar. Using Eden RC2, 25Hz material judders. For me the judder doesn't always happen. When it is juddering I can pause the playback then restart and it plays smoothly again. Debug log doesn't show anything to do with video, but does show dropped packets on audio stream.

Unfortunately I tried your fix but it didn't make a difference.

I never had any issues with Dharma.

Thanks,
Graham

Forget about that patch. The source of my problems was that somehow the deinterlace setting was changed from 'auto' to 'on', causing it to deinterlace ALL movies (even progressive ones that don't need deinterlacing), which caused framedrops. In the OSD video display menu I switched the deinterlace mode and method both to 'auto' and saved it as default for all video's and everything was fine again.

pro510 · 2012-03-09, 06:12

thespecialist Wrote:Forget about that patch. The source of my problems was that somehow the deinterlace setting was changed from 'auto' to 'on', causing it to deinterlace ALL movies (even progressive ones that don't need deinterlacing), which caused framedrops. In the OSD video display menu I switched the deinterlace mode and method both to 'auto' and saved it as default for all video's and everything was fine again.

Interesting. I'm wondering if that could be my issue too. I'll have a play.

Thanks