Posts: 13
Joined: Mar 2012
Reputation:
0
2012-03-25, 17:45
(This post was last modified: 2012-04-02, 00:59 by DDDamian.)
Noobie here. Sorry if this is covered elsewhere. I downloaded and installed XMBC today. It is running on my PC, as a trial before installing it on an HP Microserver that's arriving next week. I'm running Windows 7, on a Core-i5 based machine. There is only one display attached, running at 1920x1080.
In windowed mode, everything is fine. But when I change to full screen mode, XBMC starts behaving odd. The display is fine while navigating most of the settings. But if I break into a 'sub menu', e.g. Home -> Music -> Files -> Add source... then the screen immediately dims to full black. If I shake the mouse vigorously, it comes back, but clearly the dimming process is competing with my shaking! If I press Escape enough times, the display will return, presumably because I'm going back up the menu structure.
Once in full screen mode and playing music, the display will again blank.
"Use fullscreen rather than true fullscreen" doesn't help.
"Blank other screens" is off.
Turning off the screensaver (in XBMC) doesn't help.
Any ideas?
Thanks.
Posts: 3,025
Joined: Sep 2011
Reputation:
255
DDDamian
Team-XBMC Developer
Posts: 3,025
Welcome to the forums. Almost sounds like a refresh-rate issue or a graphics driver issue. Video drivers up-to-date? Also with Intel graphics make sure you diable DXVA and DXVA2 in the video options until Intel fixes their drivers.
System: XBMC HTPC with HDMI WASAPI & AudioEngine - Denon AVR-3808CI - Denon DVD-5900 Universal Player - Denon DCM-27 CD-Changer
- Sony BDP-S580 Blu-Ray - X-Box 360 - Android tablet wireless remote - 7.1 Streem/Axiom/Velodyne Surround System
If I have been able to help feel free to add to my reputation +/- below - thanks!
Posts: 13
Joined: Mar 2012
Reputation:
0
Thanks for the reply.
My gfx card is a Radeon HD5770. It's running the latest catalyst drivers (which were released a few weeks ago).
Posts: 3,025
Joined: Sep 2011
Reputation:
255
DDDamian
Team-XBMC Developer
Posts: 3,025
If you enable debugging it should show you the current refresh rate (FPS) - does this change when the problem occurs?
System: XBMC HTPC with HDMI WASAPI & AudioEngine - Denon AVR-3808CI - Denon DVD-5900 Universal Player - Denon DCM-27 CD-Changer
- Sony BDP-S580 Blu-Ray - X-Box 360 - Android tablet wireless remote - 7.1 Streem/Axiom/Velodyne Surround System
If I have been able to help feel free to add to my reputation +/- below - thanks!
Posts: 3,912
Joined: Apr 2004
Reputation:
29
kricker
Team-XBMC QA Specialist
Posts: 3,912
Sounds like XBMC is actaully entering the power saving mode. After x minutes of no activity it is dimming the screen. That is odd though as you are interacting with it. Can you just check to see what you power saving mode is on inside of XBMC? I just setup a Corei3 with HD3000 graphics using Intels newest drivers and it is working great.
Posts: 3,912
Joined: Apr 2004
Reputation:
29
kricker
Team-XBMC QA Specialist
Posts: 3,912
I'm not seeing anything in that bit of log. Maybe someone else will. You might want to post your full log up on pastebin and link to it. Make sure you have debugging turned on as well.
Posts: 3,025
Joined: Sep 2011
Reputation:
255
DDDamian
Team-XBMC Developer
Posts: 3,025
Yeah, nothing stands out in that log bit, but not everything gets logged, especially if it's outside XBMC. You're certain the AMD GPU is the one being used? Tried disabling DXVA (although that GPU should be fine with it)?
Just to rule things out can you download another skin (I know Transparancy is Eden-ready) and try it?
System: XBMC HTPC with HDMI WASAPI & AudioEngine - Denon AVR-3808CI - Denon DVD-5900 Universal Player - Denon DCM-27 CD-Changer
- Sony BDP-S580 Blu-Ray - X-Box 360 - Android tablet wireless remote - 7.1 Streem/Axiom/Velodyne Surround System
If I have been able to help feel free to add to my reputation +/- below - thanks!
Posts: 13
Joined: Mar 2012
Reputation:
0
Kricker: Debugging is on.
DDDamian: I only have the AMD GPU.
But you're onto something with the skin! When I switched to Transparency, the problem went away! Switched back to Confluence, and the problem came straight back!
Posts: 3,912
Joined: Apr 2004
Reputation:
29
kricker
Team-XBMC QA Specialist
Posts: 3,912
Maybe Jezz_X added an Easter Egg!
Do as DDDamian suggested and let us know.
Posts: 5
Joined: Mar 2012
Reputation:
0
I'm having a similar issue as well and using an ATI HD5450 card. Have not updated to the latest Catalyst package yet.
Posts: 13
Joined: Mar 2012
Reputation:
0
Well, I completely uninstalled it, re-downloaded (in case mine was corrupted), then re-installed again. Same problem.
Thought I'd try installing it in a Windows Server VM, but that flopped at the very start with a "Create() failed" error.
I'm not that worried about it not working full screen in my PC... The Microserver arrives tomorrow, and that'll be the real test, as that's where I want to run it!
Bizarre problem though.
Posts: 3,912
Joined: Apr 2004
Reputation:
29
kricker
Team-XBMC QA Specialist
Posts: 3,912
2012-03-26, 20:47
(This post was last modified: 2012-03-26, 20:48 by kricker.)
What GPU are you going to use on that Microserver? Did you ever get a full debug log posted on pastebin?
Posts: 13
Joined: Mar 2012
Reputation:
0
2012-03-26, 20:56
(This post was last modified: 2012-03-27, 00:25 by dash rendar.)
Ati HD5450. I have a friend who's using the same hardware combo for XBMC. He's running Ubuntu though.