2012-03-29, 22:42
I recently installed Eden on my HD-ID11-U and for the most part I am very happy. Things that were always painful for me in the past (like working audio on older Youtube videos, sound in NES emulators and menu clicks) are all working correctly now.
However, I seem to have fairly regular issues with audio dropping out just for a quick second. It will typically happen once or twice during a 30 minute HD TV show. Is anyone else seeing this?
To get everything to the state where I am now, I did the following.
In /etc/modprobe.d/alsa-base.conf I changed the following line to this:
In my .asoundrc file in my xbmc user's home directory, I have the following:
I created the file default.pa in /etc/pulse and it's contents are:
I get audio working in the mednafen emulator, I had to edit my mednafen.cfg file and change the following:
If anyone else is running XBMC Eden on this box and not having any issues with audio glitches, please let me know so we can compare configs. Thanks much![/code]
However, I seem to have fairly regular issues with audio dropping out just for a quick second. It will typically happen once or twice during a 30 minute HD TV show. Is anyone else seeing this?
To get everything to the state where I am now, I did the following.
In /etc/modprobe.d/alsa-base.conf I changed the following line to this:
Code:
options snd-hda-intel enable_msi=0 probe_mask=0xffff,0xfff2
In my .asoundrc file in my xbmc user's home directory, I have the following:
Code:
pcm.!default {
type plug
slave {
pcm "both"
}
}
pcm.both {
type route
slave {
pcm multi
channels 6
}
ttable.0.0 1.0
ttable.1.1 1.0
ttable.0.2 1.0
ttable.1.3 1.0
ttable.0.4 1.0
ttable.1.5 1.0
}
pcm.multi {
type multi
slaves.a {
pcm "tv"
channels 2
}
slaves.b {
pcm "receiver"
channels 2
}
slaves.c {
pcm "analog"
channels 2
}
bindings.0.slave a
bindings.0.channel 0
bindings.1.slave a
bindings.1.channel 1
bindings.2.slave b
bindings.2.channel 0
bindings.3.slave b
bindings.3.channel 1
bindings.4.slave c
bindings.4.channel 0
bindings.5.slave c
bindings.5.channel 1
}
pcm.tv {
type hw
card 1
device 3
channels 2
}
pcm.receiver {
type hw
card 0
device 1
channels 2
}
pcm.analog {
type hw
card 0
device 0
channels 2
}
I created the file default.pa in /etc/pulse and it's contents are:
Code:
load-module module-alsa-sink device=hw:1,3
I get audio working in the mednafen emulator, I had to edit my mednafen.cfg file and change the following:
Code:
;Select sound output device.
sound.device sexyal-literal-default
If anyone else is running XBMC Eden on this box and not having any issues with audio glitches, please let me know so we can compare configs. Thanks much![/code]