A6-PACK ☆ ISK 300-90 picoPSU HTPC A6-3500 Very Silent!

waver123 · 2012-04-12 02:05

Ha I'm waiting for my case too....
I thought that metal plate comes apart and you can just attach one?

Would the shruken sans the fan fit? I was gonna do some testing to see if the case fan alone can cool the a6-3500 down sufficiently when my parts came.

eskro · 2012-04-12 02:14

if you go with the Big Shuriken as CPU cooler,
only FAN u need in the ISK300-65 is your Shuriken FAN.

eskro · 2012-04-12 02:29

Omar why not just do like this??

(click image for bigger view)

easy fix, done deal,

Beer40oz · 2012-04-12 02:59

I already drilled the holes on the front... of the ssd holder it's going to work just fine. I just need to go to the hardware store and get a flat head screw that is a little long so the lid closes.... i have tons of screws but non with a flat head.

eskro · 2012-04-12 03:02

i see u drilled already, if it works right on!

but i think this would have been sweet too

(click image for bigger view)

Beer40oz · 2012-04-12 03:04

(2012-04-12 03:02)eskro Wrote: i see u drilled already, if it works right on!

but i think this would have been sweet too

(click image for bigger view)

Yes but it would not work..... I have it here and looked at it. You will have to cut higher.... ill check it when I get the mobo in.

eskro · 2012-04-12 03:17

i think u only need to cut high like 10mm.

till when u get the mobo in,

can u measure how tall this is please?

thx

Beer40oz · 2012-04-12 03:30

It's 1/2" and the mobo stands will bring it higher..... and on the back of the bracket there is a lip.... will be harder to cut. So if it was a structural bracket then I would think something else but it's not. I'll post a pic when it's done.

Eskro let me see when I get the mobo how high it goes.... if not I will rethink things.

eskro · 2012-04-12 03:34

as you see on the images

==>

that guy did exactly as i suggested --> Here!!

and it seems he didn't even had to Drill / Put screws to secure the plate!
Looks like it holds!

Beer40oz · 2012-04-12 03:44

Oh cool.... It looks like there is just a tiny piece of metal holding the center. I will look at it when I install it on the mobo because maybe placement is somewhere else. Nice find. But I think it don't matter if nothing is holding it on that side where is cut. The other side is pretty firm. But hey if you can leave a little piece where it's cut then good.

waver123 Senior Member Posts: 167 Joined: Jun 2011 Reputation: 1	2012-04-12 02:05 Post: #51 Ha I'm waiting for my case too.... I thought that metal plate comes apart and you can just attach one? Would the shruken sans the fan fit? I was gonna do some testing to see if the case fan alone can cool the a6-3500 down sufficiently when my parts came. (This post was last modified: 2012-04-12 02:06 by waver123.)
	find quote

eskro Posting Freak Posts: 8,236 Joined: Nov 2010 Reputation: 156	2012-04-12 02:14 Post: #52 if you go with the Big Shuriken as CPU cooler, only FAN u need in the ISK300-65 is your Shuriken FAN. My G7 HTPC // eSkRo's HTPC Guide // Poofy's HTPC Guide // unRAID Guide // SSD Optimization thx :)
	find quote

eskro Posting Freak Posts: 8,236 Joined: Nov 2010 Reputation: 156	2012-04-12 02:29 Post: #53 Omar why not just do like this?? (click image for bigger view) easy fix, done deal, My G7 HTPC // eSkRo's HTPC Guide // Poofy's HTPC Guide // unRAID Guide // SSD Optimization thx :) (This post was last modified: 2012-04-12 03:01 by eskro.)
	find quote

eskro Posting Freak Posts: 8,236 Joined: Nov 2010 Reputation: 156	2012-04-12 03:02 Post: #55 i see u drilled already, if it works right on! but i think this would have been sweet too (click image for bigger view) My G7 HTPC // eSkRo's HTPC Guide // Poofy's HTPC Guide // unRAID Guide // SSD Optimization thx :) (This post was last modified: 2012-04-12 03:03 by eskro.)
	find quote

eskro Posting Freak Posts: 8,236 Joined: Nov 2010 Reputation: 156	2012-04-12 03:17 Post: #57 i think u only need to cut high like 10mm. till when u get the mobo in, can u measure how tall this is please? thx My G7 HTPC // eSkRo's HTPC Guide // Poofy's HTPC Guide // unRAID Guide // SSD Optimization thx :) (This post was last modified: 2012-04-12 03:26 by eskro.)
	find quote

eskro Posting Freak Posts: 8,236 Joined: Nov 2010 Reputation: 156	2012-04-12 03:34 Post: #59 as you see on the images ==> that guy did exactly as i suggested --> Here!! and it seems he didn't even had to Drill / Put screws to secure the plate! Looks like it holds! My G7 HTPC // eSkRo's HTPC Guide // Poofy's HTPC Guide // unRAID Guide // SSD Optimization thx :) (This post was last modified: 2012-04-12 03:42 by eskro.)
	find quote