• 1
  • 2
  • 3
  • 4(current)
  • 5
  • 6
  • 10
ANTEC ISK 300-65 HTPC A8-3820
#46
Just got my stuff guy's
Reply
#47
(2012-05-09, 13:07)MrKay Wrote: Just got my stuff guy's
It's time to put it together then.....

>Alienware X51- do it all HTPC
>Simplify XBMC configurations
>HOW-TO Bitstreaming using XBMC
I refused to watch movie without bitstreaming HD audio!
Reply
#48
I have connected quite a bit of the wire. now i connected the hdmi wire in audio 101 and didn't connected AC'97 is that ok
now i see there is a hdmi spdif header but cant find anything that fit there
Reply
#49
(2012-05-09, 18:53)MrKay Wrote: I have connected quite a bit of the wire. now i connected the hdmi wire in audio 101 and didn't connected AC'97 is that ok
now i see there is a hdmi spdif header but cant find anything that fit there

Dont worry about the spdif or AC 97.....

unless you are going to use headphones then connect AC97


All I have is USB for front connected......

Smile

Reply
#50
O right ok thanks beer gonna un connect the hdmi one and connect the AC97 instead might use headphones now and then
Reply
#51
you just need the AC97 one front panel audio header.....
Reply
#52
beer what about the one i replaced it was called hdmi and i replaced it with AC97 what was the hdmi one for thanks
I will be using optical cable for my 5.1 since i have a old receiver and when am not using my 5.1 i will be using the hdmi where that is in tv for sound
Reply
#53
cant seem to power it on
Reply
#54
Maybe it's true the A8 need more power?

A6-3500 works great!

You saying no POWER at all?

mmmmm

you connected the front buttons correct?
Reply
#55
but am using a 135watts. am not sure about the front buttons
the power clip takes two space after the first two slots at the back right
i plugged them in straight or do i plug them in side ways?
Reply
#56
The first plug is the power led + then power led - then power switch the picture i took is on this link

http://i47.tinypic.com/doxca9.jpg


is that right ?
Reply
#57
When i plug in my usb mouse it lights up that means the motherboard is working right
Plus hear is the apu pic it say's on top AMD A8-3800 then at the bottom it says AD 38200 JZ43GX is that a a8 3800 or a8 3820 ?

http://i45.tinypic.com/pavtc.jpg
Reply
#58
(2012-05-09, 20:48)MrKay Wrote: The first plug is the power led + then power led - then power switch the picture i took is on this link

http://i47.tinypic.com/doxca9.jpg


is that right ?
You need to check the "2.9 Onboard Headers and Connectors" section of your Quick Installation Guide carefully. You'll see the step by step on how to connect it....

>Alienware X51- do it all HTPC
>Simplify XBMC configurations
>HOW-TO Bitstreaming using XBMC
I refused to watch movie without bitstreaming HD audio!
Reply
#59
fixed that problem now switches on. Now need to put the case on and check if it comes on screen
Reply
#60
connected the hdmi now it says. Reboot and Select proper Boot device or insert Boot Media in selected boot device and press a key


what do i do now? and the cpu fan is loud
just got in to bios. should i now try to do Secure Erase your SSD using PartedMagic
Reply
  • 1
  • 2
  • 3
  • 4(current)
  • 5
  • 6
  • 10

Logout Mark Read Team Forum Stats Members Help
ANTEC ISK 300-65 HTPC A8-38200