Linux TVHeadend decryption issue
#1
Hello everyone!
I happily use XBMC-PVR + TVHEadend + Oscam + Smartreader + WinTV Nova HD-S2 on Ubuntu 11.04, but...
I have a problem with the decryption of Italian channels "Rai 1", "Rai 2" and "Rai 3" which are sometimes crypted in Nagravision and Seca (simulcrypt). When the three channels transmits in FTA there's no problems, but when they are encrypted i cannot see nothing.
I have only one card for Nagravision (Tivusat italian provider) and TVHeadend seems not to send the request to oscam ("[No available descrambler]" in debug log).
Quote:May 18 21:08:36 htsp: Got connection from 127.0.0.1
May 18 21:08:36 htsp: 127.0.0.1: Welcomed client software: XBMC Media Center
May 18 21:08:36 htsp: 127.0.0.1 [ XBMC Media Center ]: Identified as user xbmc
May 18 21:08:37 dvb: "/dev/dvb/adapter0" tuning via s2api to "RAI: 10,992,000 kHz Vertical (Default (Port 0, Universal LNB))" (1242000, 27500000 Baud, 2/3, SYS_DVBS, QPSK)
May 18 21:08:37 subscription: "127.0.0.1 [ xbmc | XBMC Media Center ]" subscribing on "Rai 2", weight: 150, adapter: "Conexant CX24116/CX24118", network: "RAI", mux: "RAI: 10,992,000 kHz Vertical (Default (Port 0, Universal LNB))", provider: "RAI", service: "Rai 2", quality: 100
May 18 21:08:37 Service: Conexant CX24116/CX24118/RAI: 10,992,000 kHz Vertical (Default (Port 0, Universal LNB))/Rai 2: Status changed to [Hardware input]
May 18 21:08:37 Service: Conexant CX24116/CX24118/RAI: 10,992,000 kHz Vertical (Default (Port 0, Universal LNB))/Rai 2: Status changed to [Hardware input] [Input on service]
May 18 21:08:37 Service: Conexant CX24116/CX24118/RAI: 10,992,000 kHz Vertical (Default (Port 0, Universal LNB))/Rai 2: Status changed to [Hardware input] [Input on service] [No available descrambler]

Until a few (a couple?) of months ago everything worked fine!
I think the problem occurs since the MUX frequency has changed ... Remapping channels did not work. Perhaps they have changed the encryption priority...
The channels Rai4 (encrypted in Nagravision and Seca) and Rai Movie are on the same MUX and has no problems.
I think the problem is the priority with which tvheadend sends requests to Oscam.
Is there a way to give priority to Nagravision? Or am I totally wrong?

Sorry for my bad English!
Reply
#2
Those kind of topics (card sharing, softcams) are not allowed in this forum.
Reply
#3
Sorry, but i'm not talking about cardsharing softcam or other things not allowed...
My card TivuSat is regularly bought with my RaiTV subscription.
My card is Nagravision and I just want to see that for which I paid...
Reply
#4
It is a softcam topic since a softcam is required to read the card in the card reader.

Information is difficult to find on topics like this, because it's restricted only to forums that allow it.

XBMC isn't the place to ask. This isn't an XBMC issue.

You're more likely to get a decent answer from a more TVHeadend related forum.
Reply
#5
I understand that XBMC isn't the place to ask, in fact I also posted on the TVHeadend forum and the Oscam forum...
I'm 'just trying to figure out if it's just my problem or someone else has the same...
I'm sorry if I disturbed you. Thanks anyway.
Reply
#6
It's more the point that too much discussion of these things could get the forum shutdown.

Keep it legal!
Reply

Logout Mark Read Team Forum Stats Members Help
TVHeadend decryption issue0