2012-06-11, 17:46
Hi all
Im pulling my hair out
Not sure whats wrong
If someone can help or guide me it would be REALLY appreciated
OK - Have a Hpmicroserver was working fine with Ubuntu Server 11.10 with a Nvidia G210
Decided to install 12.04 Server from scratch and its all going wrong - 2 days wasted so far trying 11.10 and 12.04 and XBMCbuntu
Anway basically cant get sound to work
Im following most of this that somebody else has done
http://pastebin.com/KhCJdFW2 (follow until about half way down the page)
Installing the lastest drivers from nvidia in the same way
Now I remember the following should have a 1 somewhere
grep eld_valid /proc/asound/NVidia/eld*
/proc/asound/NVidia/eld#0.0:eld_valid 0
/proc/asound/NVidia/eld#1.0:eld_valid 0
/proc/asound/NVidia/eld#2.0:eld_valid 0
/proc/asound/NVidia/eld#3.0:eld_valid 0
I have seen it but cant get it back now
aplay -l shows
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
when running xinit xbmc im seeing the following at the moment - its something different everytime I do an install tho but this doesn't look good
Build Date: 07 May 2012 11:43:21PM
xorg-server 2:1.11.4-0ubuntu10.2 (For technical support please see http://www.ubuntu.com/support)
Current version of pixman: 0.24.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 11 16:40:53 2012
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) Failed to load module "nvidia" (module does not exist, 0)
(EE) Failed to load module "nv" (module does not exist, 0)
(EE) Failed to load module "nvidia" (module does not exist, 0)
(EE) Failed to load module "nv" (module does not exist, 0)
(EE) [drm] failed to open device
About to reinstall all again from scratch but no idea what I can do differently
Ive tried all the option in xbmc for the sound but none seem to work
One of them gives no error in xbmc but still no sound
Can anybody help
Wish I never started messing / bit of a unix noob and forgotten most of the things I did last time
Installed alsautils and tried alsmixer to unmute everything (they all say spdif for some reason)
Im pulling my hair out
Not sure whats wrong
If someone can help or guide me it would be REALLY appreciated
OK - Have a Hpmicroserver was working fine with Ubuntu Server 11.10 with a Nvidia G210
Decided to install 12.04 Server from scratch and its all going wrong - 2 days wasted so far trying 11.10 and 12.04 and XBMCbuntu
Anway basically cant get sound to work
Im following most of this that somebody else has done
http://pastebin.com/KhCJdFW2 (follow until about half way down the page)
Installing the lastest drivers from nvidia in the same way
Now I remember the following should have a 1 somewhere
grep eld_valid /proc/asound/NVidia/eld*
/proc/asound/NVidia/eld#0.0:eld_valid 0
/proc/asound/NVidia/eld#1.0:eld_valid 0
/proc/asound/NVidia/eld#2.0:eld_valid 0
/proc/asound/NVidia/eld#3.0:eld_valid 0
I have seen it but cant get it back now
aplay -l shows
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
when running xinit xbmc im seeing the following at the moment - its something different everytime I do an install tho but this doesn't look good
Build Date: 07 May 2012 11:43:21PM
xorg-server 2:1.11.4-0ubuntu10.2 (For technical support please see http://www.ubuntu.com/support)
Current version of pixman: 0.24.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 11 16:40:53 2012
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) Failed to load module "nvidia" (module does not exist, 0)
(EE) Failed to load module "nv" (module does not exist, 0)
(EE) Failed to load module "nvidia" (module does not exist, 0)
(EE) Failed to load module "nv" (module does not exist, 0)
(EE) [drm] failed to open device
About to reinstall all again from scratch but no idea what I can do differently
Ive tried all the option in xbmc for the sound but none seem to work
One of them gives no error in xbmc but still no sound
Can anybody help
Wish I never started messing / bit of a unix noob and forgotten most of the things I did last time
Installed alsautils and tried alsmixer to unmute everything (they all say spdif for some reason)
