• 1
  • 48
  • 49
  • 50(current)
  • 51
  • 52
  • 58
Win HOW TO - Solve audio problems + video stutter (audio induced)
(2014-05-03, 18:29)rakvatten Wrote: Hi.

I also have problems. Can't get dts hd sound to work, i have download the file from #1post and changed but it won't work. I have the following products

Intel i5 4670K (Intel4600 graphic)
Gigabyte sniper g1 m5 motherboard
LG PS 8000 (TV)
Marantz sr 5004
windows 8.1
lates stable xbmc
latest drivers and new installation of windows (No old drivers)
Hdmi cable 1,3

any idea what i missed?

Sorry missed your post, are you still having problems?

If so make sure you're using the new version 13 and post a debug log of you trying to play a DTS-HD file.
Reply
(2014-04-25, 02:19)kcsims Wrote: I have an ATI HD5xxx card. I just installed Windows 8 on my PC and I am trying to get my audio to work with WASAPI. No matter what I do I can only get this to playback without the video studdering if I select analog audio.

I also do not see and driver for ATI HDMI OUTPUT like I see in everyone's setup. Mine just shows WASAPI HDMI DIGITAL AUDIO. I have the newest drivers installed from ATI. I tried searching though everything, but I got a bit lost.

Can someone please help me out?

Thanks.

If still having problems what drivers did you install? make sure it was the latest AMD cataylst center drivers which includes the HDMI audio drivers, you however might have to remove any other HDMI you've installed first to get it to work, follow Section 1 in 1st post.
Reply
I'm having an issue with audio from non-pass-through codecs such as AAC and MP2 (digital TV). It's work fine for months and then just stopped working. I haven't installed anything new or updating any drivers as far as I can tell. Anything works fine outside of XBMC and pass-through stuff works fine too.

I've tried the problem solving on page 1 which hasn't helped unfortunately. My spec is;

Intel NUC i5 Haswell (HD5000 graphics)
Windows 8.1
8GB Ram
125GB SSD Drive
Onkyo AVR


The issue started with 12.3 and I've updated to 13.0 with no change

Is there anything obvious I'm missing?
Reply
(2014-05-12, 13:57)whitey1977 Wrote: I'm having an issue with audio from non-pass-through codecs such as AAC and MP2 (digital TV). It's work fine for months and then just stopped working. I haven't installed anything new or updating any drivers as far as I can tell. Anything works fine outside of XBMC and pass-through stuff works fine too.

I've tried the problem solving on page 1 which hasn't helped unfortunately. My spec is;

Intel NUC i5 Haswell (HD5000 graphics)
Windows 8.1
8GB Ram
125GB SSD Drive
Onkyo AVR


The issue started with 12.3 and I've updated to 13.0 with no change

Is there anything obvious I'm missing?

13.0 had an issue with AAC introduced in the last couple of weeks before release, if you're able please try the 13.1 Beta @ http://mirrors.xbmc.org/releases/win32/
Reply
(2014-05-12, 14:21)jjd-uk Wrote: 13.0 had an issue with AAC introduced in the last couple of weeks before release, if you're able please try the 13.1 Beta @ http://mirrors.xbmc.org/releases/win32/

Tried 13.1 but still no decoded audio
Reply
Could you post a debug log of you playing an AAC file, see log_file (wiki) if you've not done one before.
Reply
(2014-05-12, 23:02)jjd-uk Wrote: Could you post a debug log of you playing an AAC file, see log_file (wiki) if you've not done one before.

http://pastebin.com/rkjf5w9X

In this log should be a web stream with AAC and a live TV stream with MP2

Thanks
Reply
jjd-uk had chance to check out the logs yet?
Reply
(2014-05-27, 13:41)whitey1977 Wrote: jjd-uk had chance to check out the logs yet?

Just had a look and don't see anything obvious, do you have any actual files with aac or mp2 you could test with?

Perhaps also try with the 13.1 RC build.
Reply
I'm having an oddity with video stuttering with only ONE of my titles. And was curious if anyone else had a similar issue. It's Muppets Most Wanted. It's one of the first rips I've made using the latest version of Handbrake which now supports PGS Subtitles. If it was something I absolutely needed subtitles, before I'd rip the subtitle track and then use MKVMerge to mix them together. It's also one of the only Blurays I've come across that uses DTS HRA and not DTS MA. So when I start playing the movie about 15 minutes in, there'll be a small framerate hiccup every few seconds noticed mostly when the camera pans.I fiddled with the rendering options suggested in this thread, but that made the audio completely out of sync. On a hunch (I found old threads about people having problem with PGS subtitles) I then tried using MKV Merge to remove the PGS Subtitle (as well an extra audio track I didn't need) and then it played fine!

Again, I have no idea if the latest Handbrake is to blame or if it's something weird with the audio engine (I noticed there's not even a media flag for DTS HRA. Also, I'm still on 12.3 so it's possible it's been fixed in the latest Gotham, I haven't bothered updating yet. Like I said, I'm just wondering if anyone else has had a problem like this?
Reply
Do you use handbrake because you want to encode your release or just to make it a media file ?
If it's the last give clownbd a try,
It's the main tool to rip Blu-Rays for making remuxs (untouched video and audio) with your choice of audio tracks and subtitles without the extras and menus.
And it works with PGS subs without any issues.
LibreElec Kodi | Aeon MQ ?
Reply
Hey guys,

I'm getting the stuttering issue.

I think the fix would be to have my audio set to analog (which would be right as I'm using speakers plugged in via analog) but the analog audio option isn't in the drop down at all? Little help?

All I have to pick is:

DIRECTSOUND: Speakers (Realtek High Definition Audio)
DIRECTSOUND: Default
WASAPI: Speakers (Realtek High Definition Audio)
WASAPI: Default

Every single one of the above causes occasional audio stutters

Not entirely sure what to do here
Reply
Analog was an option in Frodo v12 and is no longer present in Gotham v13.

What you want is either DIRECTSOUND: Speakers (Realtek High Definition Audio) or WASAPI: Speakers (Realtek High Definition Audio)

Could you post a screenshot audio settings to http://imgur.com/

I think in your case it's more likely to be video settings, so can you also post screenshots of

Settings -> Video -> Playback
Settings -> Video -> Acceleration
Reply
Excuse the screen photos. It's my HTPC and I don't have a physical keyboard handy to take a screenie

http://imgur.com/09W0n8I
http://imgur.com/Xyi5lQQ
http://imgur.com/tTnLzsP

Thanks!
Reply
Audio settings seem sane.

In Video -> Playback try enabling "Sync Playback to Display" and select "Video clock (resample audio)"
Reply
  • 1
  • 48
  • 49
  • 50(current)
  • 51
  • 52
  • 58

Logout Mark Read Team Forum Stats Members Help
HOW TO - Solve audio problems + video stutter (audio induced)10