Windows - HOW-TO setup Boblight for Windows and Boblight XBMC

  Thread Rating:
  • 6 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Post Reply
kingmob Offline
Junior Member
Posts: 40
Joined: Dec 2008
Reputation: 0
Post: #121
(2014-03-04 04:01)Krazed Wrote:  Update on where I'm at with mine. I'm finding boblight runs a lot better, but doesn't seem to be picking up the colors from scenes as well as prismatik was. For example, some dark scenes are displaying with a bright orange sort colored backlight, which is very distracting. I hope a lot of this can be fixed with the boblight xbmc add-on's custom configuration, but I haven't had much of a chance to play around with the settings in that yet. Anyone have any recommended settings for those?

Edit: Just been playing around with these setting now. Bringing down the saturation in the add-on configuration makes a big difference. I've set it as 1 in my custom configuration (default for fast and slow is 3) and the colours are much better now.
Current settings I'm working with are:
Speed - 50
Autospeed - 0
Interpolation - off
Saturation - 1
Value - 10
Threshold - 10
Nice to see you arrived at the same settings independently Big Grin. To be clear for others, the default configurations for boblight make no sense (at least for lightpack). They both have high saturation and value and no threshold at all, meaning it blows up the smallest bit of color, completely destroying any darkish scene. The speed at 100 also doesn't seem to work well for fast scenes or any panning when there's multiple colors, therefore these settings work the best. I have the same except I have saturation at 1.2. However, I've got my boblightd config at saturation 1, so I'm guessing the result is similar.

For reference, here is my settings.xml for boblight:
Code:
<settings>
    <setting id="bobdisable" value="false" />
    <setting id="bobdisableonscreensaver" value="false" />
    <setting id="files_autospeed" value="0.000000" />
    <setting id="files_interpolation" value="false" />
    <setting id="files_preset" value="0" />
    <setting id="files_saturation" value="1.200000" />
    <setting id="files_speed" value="50.000000" />
    <setting id="files_threshold" value="10.000000" />
    <setting id="files_value" value="1.000000" />
    <setting id="hostip" value="127.0.0.1" />
    <setting id="hostport" value="19333" />
    <setting id="livetv_autospeed" value="0.000000" />
    <setting id="livetv_interpolation" value="false" />
    <setting id="livetv_preset" value="0" />
    <setting id="livetv_saturation" value="1.200000" />
    <setting id="livetv_speed" value="50.000000" />
    <setting id="livetv_threshold" value="10.000000" />
    <setting id="livetv_value" value="1.000000" />
    <setting id="movie_autospeed" value="0.000000" />
    <setting id="movie_interpolation" value="false" />
    <setting id="movie_preset" value="0" />
    <setting id="movie_saturation" value="1.200000" />
    <setting id="movie_speed" value="50.000000" />
    <setting id="movie_threshold" value="10.000000" />
    <setting id="movie_value" value="1.000000" />
    <setting id="musicvideo_autospeed" value="0.000000" />
    <setting id="musicvideo_interpolation" value="false" />
    <setting id="musicvideo_preset" value="0" />
    <setting id="musicvideo_saturation" value="1.200000" />
    <setting id="musicvideo_speed" value="50.000000" />
    <setting id="musicvideo_threshold" value="10.000000" />
    <setting id="musicvideo_value" value="1.000000" />
    <setting id="networkaccess" value="false" />
    <setting id="other_misc_initialflash" value="true" />
    <setting id="other_misc_notifications" value="true" />
    <setting id="other_static_bg" value="false" />
    <setting id="other_static_blue" value="128" />
    <setting id="other_static_green" value="128" />
    <setting id="other_static_red" value="128" />
    <setting id="overwrite_cat" value="false" />
    <setting id="overwrite_cat_val" value="0" />
    <setting id="sep1" value="" />
    <setting id="sep2" value="" />
    <setting id="sep3" value="" />
    <setting id="tvshow_autospeed" value="0.000000" />
    <setting id="tvshow_interpolation" value="false" />
    <setting id="tvshow_preset" value="0" />
    <setting id="tvshow_saturation" value="1.200000" />
    <setting id="tvshow_speed" value="50.000000" />
    <setting id="tvshow_threshold" value="10.000000" />
    <setting id="tvshow_value" value="1.000000" />
</settings>
find quote
graecus Offline
Junior Member
Posts: 6
Joined: Dec 2010
Reputation: 0
Post: #122
Hello,
I have a pretty basic question,
which one of these led strips do I need for boblight?

http://www.ebay.com/itm/5M-48-LEDs-16-Pi...4861e90319

http://www.ebay.com/itm/5M-WS2801-Blcak-...51b16eb26d
find quote
Hammi Offline
Senior Member
Posts: 164
Joined: Dec 2009
Reputation: 0
Post: #123
I used LEDs like these to built them into a frame behind my TV:

http://www.ebay.com/itm/50pcs-Waterproof...35d4b8c507

I have a (maybe stupid) question on the boblight configuration creator: I have 100 LEDs, with the first LED being the 9th from the right at the bottom, and then the LEDs go counterclockwise. In total, I have 16 LEDs on the left and right and 34 at the top and bottom. So do I have to put 12, 13, 9 or 25, 0, 9 into the configuration creator? I toggled the bottom right radio button to define the start.

Thanks!
(This post was last modified: 2014-04-14 09:11 by Hammi.)
find quote
TeKo Offline
Posting Freak
Posts: 964
Joined: Dec 2011
Reputation: 11
Post: #124
--------35
17------------17
---26---0---9

Dont change the radio button for the start and set it to counterclockwise.

Had to use "-" space kinda messed up the format.
(This post was last modified: 2014-04-15 12:17 by TeKo.)
find quote
jjhtpc Offline
Junior Member
Posts: 46
Joined: Dec 2013
Reputation: 0
Post: #125
hello,

Thanks to bossanova for the application!

I thought I would try to contribute with some things that worked for me. I also came to the same saturation/value settings described earlier of 1.2/1.0.

I have 3 bravekits (lightpack clones) that each have 6 leds on each of the 10 strips this is all set around a frame for a 96" screen I have for my Panasonic projector. Because of the multiple lightpacks I was having occasional scenarios where 1 or 2 of the lightpacks would stop functioning and the only way to correct it would be to go out of xbmc and kill boblightd and restart it. This was cumbersome as I had to window out of full screen mode and then back in while a show was playing (very low WAF).

I have always been a user of autohotkey to automate simple scripts and I decided to use the same in this scenario.

I have a Thermaltake DH 202 (great pc case btw) that has the IMON controller setup which works great with xbmc. The imon allows hotkeys to be programmed as function keys on the remote.

This allowed me to use the following autohotkey script so that while a movie or show is running I can push a button on my remote and kill boblightd and then another button to restart it. Not interrupting the viewer experience or stopping the show.

Here is the script and I hope this helps:

^+c::Process, Close, boblightd.exe

detectHiddenWindows, on

^+b::Run C:\boblightd\boblightd.exe -c C:\boblightd\boblight.conf, , hide


As a side note it is good to point out that I used ctrl shift for my two commands that is the ^+ I set close to ^+c and open boblightd to ^+b.

Let me know if this was useful or if there was some much easier way of doing this.
find quote
johnny123 Offline
Junior Member
Posts: 7
Joined: May 2014
Reputation: 0
Post: #126
hi there.

i started another thread about this im hoping someone would be able to help me get 2 lightpacks going on windows with XBMC and boblight

please see this thread

http://forum.xbmc.org/showthread.php?tid=196607
find quote
dimnet2000 Offline
Junior Member
Posts: 39
Joined: Jul 2010
Reputation: 0
Post: #127
(2013-03-26 16:29)levimadman Wrote:  Fellas - here is my batch for windows boblight which solves the com port opening problem :


Code:
MODE COM8:9600,N,8,1 >NUL
clear


tasklist /FI "IMAGENAME eq boblightd.exe" 2>NUL | find /I /N "boblightd.exe">NUL
if "%ERRORLEVEL%"=="0" goto running

c:
cd c:\users\barcode\desktop\boblightd\
start.bat


running:
echo running..

hi,

That doesn<t make any sense the batch you just wrote.

There is something not accurate.

Can you tell me where exactly do i need to add that^

Is it in the startup of windows 8.1 pro 32bits ?

I have com3 on arduino uno r3 and have same issue. start.bat try to open the serial port and he said cannot.
find quote
dimnet2000 Offline
Junior Member
Posts: 39
Joined: Jul 2010
Reputation: 0
Post: #128
Hi,
(This post was last modified: 2014-06-12 03:41 by dimnet2000.)
find quote
gal337xbmc Offline
Junior Member
Posts: 1
Joined: Jun 2014
Reputation: 0
Post: #129
Hi all,
I'm having issues with my Adalight/Boblight setup.
I've followed the adafruit guide and have now followed the guide in this thread to setup boblight for windows.

When I run the start.bat file
The LEDs run through a colour sequence with the following terminal:
Code:
C:\boblightd>MODE COM18:115200,N,8,1  1>NUL

C:\boblightd>clear
'clear' is not recognized as an internal or external command,
operable program or batch file.

C:\boblightd>tasklist /FI "IMAGENAME eq boblightd.exe"   2>NUL  | find /I /N "bo
blightd.exe" 1>NUL

C:\boblightd>if "1" == "0" goto running

C:\boblightd>C:\boblightd\boblightd.exe -c c:\boblightd\boblight.conf -f

C:\boblightd>running:
'running:' is not recognized as an internal or external command,
operable program or batch file.

C:\boblightd>echo running..
running..

After I open XBMC it shows connected to boblight but no LED's light up. I've enabled the static background light but still nothing. I'm unable to play a movie to check if the LEDs are working as XBMC is crashing while boblight is enabled.

I'm using 13.1 Gotham and my .conf file is below
Code:
[global]
interface 127.0.0.1
port      19333

[device]
name            AmbiLight
type            momo
output          /dev/com18
channels        150
prefix          41 64 61 00 31 64
interval        20000
rate            115200
debug           on
delayafteropen  100000

Any advice would be greatly appreciated.
find quote
gcthompson Offline
Junior Member
Posts: 9
Joined: Oct 2010
Reputation: 0
Post: #130
Thanks for this! Works well
find quote
Post Reply