[pandi]

Hi , ich hoffe das der Deutsche Support hier auch angenommen wird ? .

Ich habe da ein kleines Problem und komme einfach nicht weiter .

Ich habe auf meinen HTPC XBMC 12 auf Windows 8 .

Mein Problem ist das ich DTS Sound ohne Probleme abspielen kann doch bei DTS HD HRA 5.1 Ruckelt das Bild nur noch und ich bekomme es nicht hin das dies ohne Probleme läuft was ist mein Problem ?

Den Sound gebe ich über meine Grafikkarte aus dies ist eine Sapphire RADEON HD 6670 PCI Express 2.0 x16, 2 GB, DDR3 SDRAM Codierte Formate werden unterstützt DTS Audio , DTS HD , Dolby TrueHD , Dolbydigital u.s.w angeschlossen ist die Grafikkarte über HDMI an meinen Onkyo HTR 548 .
Bei XBMC ist Dolby True HD Aktiviert woran kann es liegen das dies nicht geht ? Der Film ist eine Orginal BDMV .

Bitte um Hilfe und es währe super wenn dieses Thema auf Deutsch behandelt wird da dies bestimmt in Detail geht .

Ich danke euch .

[baijuxavior]

Hi, English please. Use google translate.

[WiSo]

Sorry no support in German. Read the how-to about audio it might help: http://forum.xbmc.org/showthread.php?tid=146911
Its possible that you've enabled some features which you receiver isn't capable of.

[pandi]

Hi, I hope that the German support is assumed here as well? .

I have a little problem and I can not keep going.

I have on my XBMC HTPC 12 Windows 8.

My problem is that I can play DTS sound without problems but with DTS HD HRA 5.1 jerks the picture just yet and I do not get it the way it without any problems then what is my problem?

The sound I give about my graphics card, this is a Sapphire RADEON HD 6670 PCI Express 2.0 x16, 2 GB, DDR3 SDRAM Memory formats supported audio, DTS HD, Dolby TrueHD, Dolby Digital, etc. DTS connect the graphics card via HDMI to my Onkyo HTR 548th
In XBMC Dolby True HD Enabled is what other causes are that this is no good? The film is an original BDMV.

Please for help. Währe super and if this issue is addressed in German as it is determined in detail

I thank you.

So here now only in German

[jjd-uk]

As already mentioned, check the sticky http://forum.xbmc.org/showthread.php?tid=146911

Starting point would be to check what "Supported Formats" in Windows 8 reports and then in "Device Manager" check the "Driver Provider" under "Sound, video and game controllers -> Properties"

[pandi]

Hi, with properties of all sizes are Grafkkarte drinne only I see it there in available channels only 6 If, however, this may be the problem?

[jjd-uk]

Grafkkarte drinne

If English language is a problem for you, maybe some pictures would help us.

What do you have for

[pandi]

http://s14.directupload.net/file/d/3160/...ab_jpg.htm

http://s7.directupload.net/file/d/3160/3hcvv3l9_jpg.htm

[jjd-uk]

They all look fine, please enable debug logging and try playing problem file again, refer to http://wiki.xbmc.org/index.php?title=Log_file

Copy the debug log to http://pastebin.com/ and provide link here

[pandi]

Log file

Right now the Windows 7 is at 8 but the same have currently, just windows 7 back on it because I thought it's the system.

[jasjeet]

Try disable "Use a Full Screen Window rather than a True Full Screen" in Video settings.

[jjd-uk]

Log file

Right now the Windows 7 is at 8 but the same have currently, just windows 7 back on it because I thought it's the system.

I think problem could be that Windows is reporting HDMI capabilities as 5.1 (6 channels) instead of 7.1 (8 channels).

XBMC is not reporting TrueHD and DTS-HD capabilities and that could be down to it seeing only 5.1 channels as XBMC requires 7.1 for it to pass HD audio even if the asctual audio track only contains 5.1 channels. Unfortunately I don't know the code to tell exactly what's going on plus there is a load of

Code:

CDVDPlayerAudio:: Discontinuity1

messages that I'm not familiar with. Hopefully Damian or one of the other dev's will take a look.

To get smooth playback of files with HD audio for the moment you'll have to disable the options

TrueHD capable receiver
DTS-HD capable receiver

then start looking into why your system is reporting 6 channels only.

It could be an EDID handshaking problem over HDMI with the AVR so might require an EDID override.

[pandi]

Okay then I will equal only times TrueHD capable receiver
DTS-HD capable receiver off and see what happens. There must then be something to drivers as the card can indeed only shows 7.1 on windows 5.1 is what really funny. Best times already, thanks, I hope that anyone looking why this is ..

[bimme]

http://forum.xbmc.org/showthread.php?tid=134993
Maybe this can help u?

[jjd-uk]

No, Realtek for AMD HDMI does not work on Frodo.