2013-02-14, 15:54
Hi,
I use OpenElec as a front-end and DVR as a back-end to receive and play DVB-S channels from the position S23E5. VNSI is used to integrate XBMC and VDR. I receive 36 channels of which some are FTA and some are not. Most of the channels work fine but two channels do not play in XBMC as they should. I checked threads in this forum but I could not find a solution of the problem so I am opening this thread hoping to find someone who can help resolving it.
Symptoms of the problem:
when switching over to some channels, XBMC shows a static (not moving) picture from that channel, produces few seconds of stuttering sound and starts reporting “VNSI: no signal”. While trying to investigate the problem, the following has been further observed:
Configuration
OpenElec: 2.99.2 (3.0 RC 2)
XBMC: 12.0-RC3 git aea93c3 (compiled on 25-Jan-2013)
VNSI XBMC addon: 1.6.4
VDR: 1.7.31
VNSI VDR plugin: 0.9.1 git clone https://github.com/opdenkamp/xbmc-pvr-addons.git (14-Feb-2013)
Logs
The two logs provided below reflect a scenario in which a working channel was selected (referred to as “CT2” in the log) and then a problematic channel was selected (referred to as “Nova Cinema” in the log)
Can anybody suggest a solution for the problem described above?
Cheers,
Jan
I use OpenElec as a front-end and DVR as a back-end to receive and play DVB-S channels from the position S23E5. VNSI is used to integrate XBMC and VDR. I receive 36 channels of which some are FTA and some are not. Most of the channels work fine but two channels do not play in XBMC as they should. I checked threads in this forum but I could not find a solution of the problem so I am opening this thread hoping to find someone who can help resolving it.
Symptoms of the problem:
when switching over to some channels, XBMC shows a static (not moving) picture from that channel, produces few seconds of stuttering sound and starts reporting “VNSI: no signal”. While trying to investigate the problem, the following has been further observed:
- these 2 problematic channels can be recorded and played back afterwards without any problem
- when using the streamdev VDR plugin, these 2 problematic channels play only when using Packetized elementary stream. When using Elementary stream, the channel playback (which seems to be flawles) stops after 2-10 seconds.
Configuration
OpenElec: 2.99.2 (3.0 RC 2)
XBMC: 12.0-RC3 git aea93c3 (compiled on 25-Jan-2013)
VNSI XBMC addon: 1.6.4
VDR: 1.7.31
VNSI VDR plugin: 0.9.1 git clone https://github.com/opdenkamp/xbmc-pvr-addons.git (14-Feb-2013)
Logs
The two logs provided below reflect a scenario in which a working channel was selected (referred to as “CT2” in the log) and then a problematic channel was selected (referred to as “Nova Cinema” in the log)
Can anybody suggest a solution for the problem described above?
Cheers,
Jan