[Resolved] : Vu+ Backend just dont start
#1
Tongue 
I have added the Vu+ Addon
I configured the IP of my loacl Network Vu+
And I specified a folder to store channels

But after don't know how to start ? Sad
Reply
#2
Enable LiveTV in the XBMC settings.
Reply
#3
(2013-05-06, 21:11)jdembski Wrote: Enable LiveTV in the XBMC settings.

OK it's enabled Live TV
But I forgot to rebbot after these settings
Now I reboot and it's loading the channels from my demo Wink

NjB
Reply
#4
Video 
OK now I did a rebbot in my openelec computer
I go to Live TV
I find all the channels that were imported from the DM 800 HD

But when I try to start any channel, nothing Happen Undecided

NjB
Reply
#5
Can you stream via web interface? Is the configured streaming port the correct one?
Reply
#6
(2013-05-06, 22:21)jdembski Wrote: Can you stream via web interface? Is the configured streaming port the correct one?

Wich port is set by default ? Huh

NjB
Reply
#7
8001 is the addon default.

Please check whether you can access your streams via the web interface.

Is your box a single tuner or dual tuner box?
Reply
#8
OK when I put in the web viewer (cause I don't have a real web browser in the pc) my receiver IP it give me the page of the box
If I put the IP of the box and the port 8001, it start loading then error message :
"Error loading page HTTP error 502 : Bad Gateway

My box is a single tuner box
Reply
#9
Regarding the error on VU+ Enigma2 PVR add-on "Connection lost":

Not sure if this helps... but the issue I had is very similar to one described earlier..
I'm on Frodo 12.1 on one PC & 12.2. on a second PC.
I got constant "connection lost" on Enigma2 PVR add-on.
After hours of fiddling I finally recalled that I had just updated to a new OpenPli image on my DM 7025+ which has a bug in the OpenWebIf.

Here's the fix that solved both issues on my XBMC AND on my 7025 Smile
http://www.dreamoem.com/showthread.php?2...#post26089

Hope it helps at least some of you!
Reply
#10
Finally a get the channels work in XBMC with Vu+ Enigma2 addon enabled
I used for my backend a dream 800 HD with Newnigma2 v 3.3.2

I'm very happy it's working now

I think the main thing is the image of the set-top box you're using in the backend
In my case i used Blackhole and ICVS without success

The last test I did with Newnigma2 v 3.3.2 was succefull
Reply

Logout Mark Read Team Forum Stats Members Help
[Resolved] : Vu+ Backend just dont start0