2013-10-03, 13:05
Hi gauche,
in order to connect tvheadend with the HDHomerun device you need to have the dvbhdhomerun driver package installed.
Have a look into http://forum.xbmc.org/showthread.php?tid=141981, or
http://forum.xbmc.org/showthread.php?tid...pid1483145 e.g.
After installing you have to edit the config file. On ubuntu it is /etc/dvbhdhomerun .
The most important entry is the XXXXYYYY-Z. This is a kind of identifier of your hdhomerun device. (see logfile of synology or get it by the windows tool)
Here ist my config file (on Ubuntu, DVB-T tuner). Replace the 1210EBE9 with your device ID:
# Remember to exchange the XXXXYYYY-Z with the serial number of your HDHomeRun
# tuner:
# Auto detect tuner type is not possible in all cases, so you can force it
# DVB-C
DVB-T
# ATSC
[1210EBE9-0]
tuner_type=DVB-T
[1210EBE9-1]
tuner_type=DVB-T
# You can use a full name including tuner ID. Meaning the tuner will appear as
# "HDHomeRun DVB-C 1234EA3D-0" instead of just "HDHomeRun DVB-C" in for example
# TVHeadend.
[1210EBE9-0]
use_full_name=true
[1210EBE9-1]
use_full_name=true
# You can disable certain tuners. As default all detected hdhomeruns are used
[XXXXYYYY-2]
disable=true
# Enable additional logging from libhdhomerun itself
[libhdhomerun]
#enable=true
#logfile=/var/log/dvbhdhomerun_libhdhomerun.log
in order to connect tvheadend with the HDHomerun device you need to have the dvbhdhomerun driver package installed.
Have a look into http://forum.xbmc.org/showthread.php?tid=141981, or
http://forum.xbmc.org/showthread.php?tid...pid1483145 e.g.
After installing you have to edit the config file. On ubuntu it is /etc/dvbhdhomerun .
The most important entry is the XXXXYYYY-Z. This is a kind of identifier of your hdhomerun device. (see logfile of synology or get it by the windows tool)
Here ist my config file (on Ubuntu, DVB-T tuner). Replace the 1210EBE9 with your device ID:
# Remember to exchange the XXXXYYYY-Z with the serial number of your HDHomeRun
# tuner:
# Auto detect tuner type is not possible in all cases, so you can force it
# DVB-C
DVB-T
# ATSC
[1210EBE9-0]
tuner_type=DVB-T
[1210EBE9-1]
tuner_type=DVB-T
# You can use a full name including tuner ID. Meaning the tuner will appear as
# "HDHomeRun DVB-C 1234EA3D-0" instead of just "HDHomeRun DVB-C" in for example
# TVHeadend.
[1210EBE9-0]
use_full_name=true
[1210EBE9-1]
use_full_name=true
# You can disable certain tuners. As default all detected hdhomeruns are used
[XXXXYYYY-2]
disable=true
# Enable additional logging from libhdhomerun itself
[libhdhomerun]
#enable=true
#logfile=/var/log/dvbhdhomerun_libhdhomerun.log