2013-11-13, 15:43
Hi Guys,
I have had some issues with my XBMC PC so have had to complete a fresh install and have spent quite a bit of time configuring everything so it is back to how it was. I am hoping for some guidance regarding the IR remote.
I have setup IR-Keytable as per the guide that is sticky on this forum and things are working nicely but there are quite a few buttons that have no function assigned as I am using a slightly modified version of the tbs_nec file that is located at /lib/udev/rc_keymaps/tbs_nec (copied to /etc/rc_keymaps/tbs_nec)
Now I know the guide basically say to work out what function you want the button to do and then map it to a key on the keyboard which is related to the keyboard.xml so for example the OK button on the remote does nothing until you change the keymap table from "KEY_OK" to "KEY_ENTER" so does anyone have any links that would tell me what button should be mapped to what so I have minimal mods to do in the keyboard.xml file.
This is the remote I am currently using
This is the keymap file that I am loading with IR-Keymaps I am using the standard keyboard.xml file.
I have had some issues with my XBMC PC so have had to complete a fresh install and have spent quite a bit of time configuring everything so it is back to how it was. I am hoping for some guidance regarding the IR remote.
I have setup IR-Keytable as per the guide that is sticky on this forum and things are working nicely but there are quite a few buttons that have no function assigned as I am using a slightly modified version of the tbs_nec file that is located at /lib/udev/rc_keymaps/tbs_nec (copied to /etc/rc_keymaps/tbs_nec)
Now I know the guide basically say to work out what function you want the button to do and then map it to a key on the keyboard which is related to the keyboard.xml so for example the OK button on the remote does nothing until you change the keymap table from "KEY_OK" to "KEY_ENTER" so does anyone have any links that would tell me what button should be mapped to what so I have minimal mods to do in the keyboard.xml file.
This is the remote I am currently using
This is the keymap file that I am loading with IR-Keymaps I am using the standard keyboard.xml file.
Code:
# table tbs_nec, type: NEC
0x84 KEY_POWER2
0x94 KEY_MUTE
0x87 KEY_1
0x86 KEY_2
0x85 KEY_3
0x8b KEY_4
0x8a KEY_5
0x89 KEY_6
0x8f KEY_7
0x8e KEY_8
0x8d KEY_9
0x92 KEY_0
0xc0 KEY_10CHANNELSUP
0xd0 KEY_10CHANNELSDOWN
0x96 KEY_CHANNELUP
0x91 KEY_CHANNELDOWN
0x93 KEY_VOLUMEUP
0x8c KEY_VOLUMEDOWN
0x83 KEY_RECORD
0x98 KEY_PAUSE
0x99 KEY_ENTER
0x9a KEY_CAMERA
0x81 KEY_UP
0x90 KEY_LEFT
0x82 KEY_RIGHT
0x88 KEY_DOWN
0x95 KEY_FAVORITES
0x97 KEY_SUBTITLE
0x9d KEY_ZOOM
0x9f KEY_EXIT
0x9e KEY_MENU
0x9c KEY_EPG
0x80 KEY_PREVIOUS
0x9b KEY_MODE