Problem on Synology

  Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Post Reply
gagadu Offline
Junior Member
Posts: 10
Joined: Mar 2012
Reputation: 0
Post: #1
Hi Guys,

I have a (hopefully) only small problem during the first setup, that I can't solve, hope
you can help me.

I have Tvheadend installed on a Synology DS413 with a TechniSat Skystar USB (DVB-S) attached.

The config auf Tvheadend find this device and starts also the scan on the Astra 19.2E.

Services are found, only the signal strength rests at 0%, so that nothing is or can't be streamed.

I think the possible problem could be, that i am working behind a multiswitch, but i am not
sure what i have to change in the configuration and neither can't find a solution.

Thanks in advance!
find quote
joncl Offline
Junior Member
Posts: 17
Joined: Jan 2014
Reputation: 1
Post: #2
Use the multiswitch setting like normal i.e;

Diseqc !,2,3,4 (a,b,c,d)
LO: (of LNB as an universal LNB will not switch with your device as their is no 18v)
V / H
find quote
gagadu Offline
Junior Member
Posts: 10
Joined: Mar 2012
Reputation: 0
Post: #3
Hello joncl,

thank you for your answer!
Unfortunately I don't really understand what you mean.

Just to be a bit more accurate on my setup:
I have a 8-way Multiswitch with one lnb.
TVHeadend finds all muxes and channels, but when i tune
to one channel i only get a green image.

Thanks again for your help!
find quote