Posts: 16
Joined: Apr 2006
Reputation:
0
that's it, i have weekend reading. thank you for the link!
it may very well be possible to do what you ask. you see the wawi plug-in allow you to set what port the plug-in should operate at.
so it maybe possible, to set
room1 = 192.168.0.1:91/play
room2 = 192.168.0.1:92/play
room3 = 192.168.0.1:93/play
room4 = 192.168.0.1:94/play
room5 = 192.168.0.1:95/play
so you need 5 winamp's running on the computer, eash listening on different port. that means that you set-up 5 scripts in the xbox.
winamprc1.py for room1 (set to port 91)
winamprc2.py for room2 ...
winamprc3.py for room3
winamprc4.py for room4
winamprc5.py for room5
to implement a 'live' port config into the script, maybe a bit too much for most users, but you're used to doing things advanced, so the above solution maybe alright.
look forward to the weekend. still doing booooring reports..
Posts: 16
Joined: Apr 2006
Reputation:
0
another thought came by. i do not know the possiblitites, but you maybe able to customize the script for your needs.
i was just thinking, if you know how to catch remote control signals, you may be able to do something like
if remote contol key 1 received, then set port to 91
if remote contol key 2 received, then set port to 92
if remote contol key 3 received, then set port to 93
if remote contol key 4 received, then set port to 94
if remote contol key 5 received, then set port to 95
a simple
select case
case key 1
set port "91"
case key 2 and so on.
end select
may solve that. i do not expect lolol to do that though, as it would most likely be a risk for stuff-ups for ordinary users.
Posts: 109
Joined: Jan 2005
Reputation:
10
lolol
Senior Member
Posts: 109
hello guys,
thx for the idea with the zones... i will have a look at it, but at the moment my priority is to code a clean, handy winampinterface...
at the moment i'm doing some skinwork to get a better look'n'feel, also the playlist things have to be done....
i will release a new version today... yesterday it was not possible, the script was not presentable :d
cheers lolol
Posts: 16
Joined: Apr 2006
Reputation:
0
sure will do... must have been a pretty tricky script to do, as it sounds like you've taken it far. have not installed yet, but will do over the next 24 hours.
Posts: 16
Joined: Apr 2006
Reputation:
0
well, i suppose to work, but i could not wait.
did an install, and it is very impressive. actually i'm very glad that you took this task. this is heading towards being a 'killer' script!
i am super happy with the way it is already!
if this is your first "big one", well, congratulations!
i use automatic djs that act as a 'radio' so personally i do not stuff around with playlists. edit added: well, maybe just seeing the current playlist and selecting a song, but not adding to it would be cool.
i cannot find faults with the script at this point in time, but if i do i'll share the findings here. still cannot believe seeing 'playing time' live on the xbox.... that is just unreal... and who's playing... unreal...
added: love the play/pause function!
added: btw, mediamonkey do have problems with adding/substracting songs on a playlist using wawi. winamp is needed for that. however, that is not really related to this, just thought i should add it
Posts: 16
Joined: Apr 2006
Reputation:
0
thought maybe
next prev could be on the same line, like vol and playlist.
maybe vol could become two buttons too.
prev | next
play/pause function = excellent
stop
vol - | vol +
playlist
maybe vol can just be a simple, click once, increase vol with +1 or something.
just some thoughts, that is not really well through about.. if that makes sense... zzz time here.
Posts: 109
Joined: Jan 2005
Reputation:
10
lolol
Senior Member
Posts: 109
hello,
the next prev buttons should be possible...
the vol control is not possible atm, because there is no way to get the current value from the wafi plugin....
i would have to modify the winamp plugin to, for that...
cu lolol
Posts: 16
Joined: Apr 2006
Reputation:
0
i certainly felt i was wrong in my 'vol' thing.
guess you get mixed up with all the stuff available out there.
maybe click vol, and a list of 0 - 10 comes up, and you hit up/down key to find the right level you want and hit select.
something like
vol +/- you hit that button
and a list comes up
0
1
2
3
4
5
6
7
8
9
10
and then you just do some quick arrow keys to go to 7 for example... hmm .. donno..
or.... i just wonder if it possible to catch the 0-9 keys, while script is active..... that would solve it too.. and then just forget about the value 1 or make it so that
0 = /vol?volume=0 'volume setting (mute)
1 = /vol?volume=2 'volume setting
2 = /vol?volume=3 'volume setting
3 = /vol?volume=4 'volume setting
4 = /vol?volume=5 'volume setting
5 = /vol?volume=6 'volume setting
6 = /vol?volume=7 'volume setting
7 = /vol?volume=8 'volume setting
8 = /vol?volume=9 'volume setting
9 = /vol?volume=10 'volume setting
meaning, that you just skip the level 1 in volume settings. it's sort of totally useless anyways.
it's a remote control, so i do not think anyone would really hear the difference of 1 & 2
(edited a few times this post, while thinking about it... i'll leave it alone now)