Now I have change the start script to log level 2 (at least I think I have) added this line OPTIONS="-l2" in /etc/default/vdr
The compiling of the drivers is a mistury for me. I jus followed this
guide and I got picture.
Draft from my log after det change in start script:
Client with ID 6 connected: 192.168.2.101:50543
Apr 26 20:39:45 TVTest vdr: [5500] VNSI: LiveStreamer::Close - close
Apr 26 20:39:45 TVTest vdr: [5504] VNSI: Welcome client 'XBMC Media Center' with protocol version '5'
Apr 26 20:39:45 TVTest vdr: [5504] VNSI: LiveStreamer::Close - close
Apr 26 20:39:45 TVTest vdr: [5504] VNSI: allocated timeshift buffer with size: 500000000
Apr 26 20:39:45 TVTest vdr: [5504] VNSI: Successfully switched to channel 7 - Animal Planet
Apr 26 20:39:45 TVTest vdr: [5504] VNSI: Started streaming of channel Animal Planet (timeout 10 seconds)
Apr 26 20:39:45 TVTest vdr: [5284] VNSI: Client with ID 5 seems to be disconnected, removing from client list
Apr 26 20:39:48 TVTest vdr: [5264] VNSI: Video Input - new pmt, attaching receiver
Apr 26 20:39:48 TVTest vdr: [5507] VNSI: Created stream for pid=3229 and type=8
Apr 26 20:39:48 TVTest vdr: [5507] VNSI: Created stream for pid=3228 and type=5
Apr 26 20:39:48 TVTest vdr: [5507] VNSI: Created stream for pid=3226 and type=11
Apr 26 20:39:52 TVTest vdr: [5264] VNSI: Video Input - new pmt, attaching receiver
Apr 26 20:39:53 TVTest vdr: [5507] VNSI: cParserAAC::FindHeaders - detected ADTS muxing mode
Apr 26 20:39:53 TVTest kernel: [75231.306686] cLiveStreamer s[5507] trap divide error ip:7fdf24fba55c sp:7fdec9315600 error:0 in libvdr-vnsiserver.so.2.0.0[7fdf24f95000+42000]
One thing I notice is after vdr restarts the TV card seems struggling to start.
some more log:
Apr 26 20:41:59 TVTest vdr: [5583] CAM 1: module present
Apr 26 20:42:03 TVTest kernel: [75360.627179] tbs5881: CI enabled.
Apr 26 20:42:03 TVTest kernel: [75360.627183] dvb_ca adapter 0: DVB CAM detected and initialised successfully
Apr 26 20:42:03 TVTest vdr: [5583] CAM 1: module ready
Apr 26 20:42:06 TVTest vdr: [5583] CAM 1: Viaccess Access, 01, CAFE, BABE
Apr 26 20:42:08 TVTest kernel: [75366.572952] tbs5881: CI disabled.
Apr 26 20:42:09 TVTest vdr: [5583] CAM 1: module present
Apr 26 20:42:13 TVTest kernel: [75370.660881] tbs5881: CI enabled.
Apr 26 20:42:13 TVTest kernel: [75370.660885] dvb_ca adapter 0: DVB CAM detected and initialised successfully
Apr 26 20:42:13 TVTest vdr: [5583] CAM 1: module ready
Apr 26 20:42:20 TVTest vdr: [5583] CAM 1: Viaccess Access, 01, CAFE, BABE
Apr 26 20:42:23 TVTest kernel: [75380.690899] tbs5881: CI disabled.
Apr 26 20:42:23 TVTest vdr: [5583] CAM 1: module present
Apr 26 20:42:27 TVTest kernel: [75384.695837] tbs5881: CI enabled.
Maybe the problem is the drivers?