2014-07-03, 12:03
New attempt to run the "NotOnlyTV LV3H" with XBMC live 13.
I explain my steps.
First:http://www.linuxtv.org/wiki/index.php/NotOnlyTV_LV3H
wget http://steventoth.net/linux/hvr1400/xc3028L-v36.fw
mv xc3028L-v36.fw /lib/firmware/xc3028-v27.fw
Once we have the firmware, now we need the options for the module to make it work properly:
nano /etc/modprobe.d/LV3H.conf
Now add the line:
options cx88xx card=81 tuner=71
1 Check that I have:
sudo lspci -n
04:01.0 0400: 14f1:8800 (rev 05)
04:01.1 0480: 14f1:8801 (rev 05)
04:01.2 0480: 14f1:8802 (rev 05)
In http://kmuto.jp/debian/hcl/, say:
14f18800 Si Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder cx8800 v2.6.25-
14f18801 Si Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] cx88-alsa v2.6.25-
14f18802 Si Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] cx8802 v2.6.25-
2º Load de kernel
I would say (I'm not knowledgeable in linux, I read from here and there) I work tuner.
3º Now I'm going to spain xbmc tutorial to tune (http://xbmcspain.com/foro/topic-t72.html), we perform the "Main Setup" and reached the channel search miss it:
sudo apt-get install dvb-utils
[sudo] password for vicent:
Reading package lists ... Done
Building dependency tree
Reading state information ... Done
The dvb-utils package is not available but referred to by another package
him. This may mean that the package is missing, has been obsoleted, or is only
available from any other source
However, the following packages replace it:
dvb-apps: dvb-apps i386
Install dvb-apps and scan...
ls -lR /dev/dvb
/dev/dvb:
total 0
drwxr-xr-x 2 root root 120 Jul 3 13:01 adapter0
/dev/dvb/adapter0:
total 0
crw-rw----+ 1 root video 212, 1 Jul 3 13:01 demux0
crw-rw----+ 1 root video 212, 2 Jul 3 13:01 dvr0
crw-rw----+ 1 root video 212, 0 Jul 3 13:01 frontend0
crw-rw----+ 1 root video 212, 3 Jul 3 13:01 net0
scan /usr/share/dvb/dvb-t/es-Valencia | tee channels.conf
if I try w_scan
I explain my steps.
First:http://www.linuxtv.org/wiki/index.php/NotOnlyTV_LV3H
wget http://steventoth.net/linux/hvr1400/xc3028L-v36.fw
mv xc3028L-v36.fw /lib/firmware/xc3028-v27.fw
Once we have the firmware, now we need the options for the module to make it work properly:
nano /etc/modprobe.d/LV3H.conf
Now add the line:
options cx88xx card=81 tuner=71
1 Check that I have:
sudo lspci -n
04:01.0 0400: 14f1:8800 (rev 05)
04:01.1 0480: 14f1:8801 (rev 05)
04:01.2 0480: 14f1:8802 (rev 05)
In http://kmuto.jp/debian/hcl/, say:
14f18800 Si Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder cx8800 v2.6.25-
14f18801 Si Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] cx88-alsa v2.6.25-
14f18802 Si Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] cx8802 v2.6.25-
2º Load de kernel
I would say (I'm not knowledgeable in linux, I read from here and there) I work tuner.
Code:
sudo lsmod
Module Size Used by
ir_lirc_codec 13021 0
lirc_dev 19980 1 ir_lirc_codec
nls_iso8859_1 12713 1
ufs 74890 0
qnx4 13317 0
hfsplus 107516 0
hfs 54677 0
minix 36140 0
ntfs 97369 0
msdos 17332 0
jfs 181348 0
xfs 912173 0
cfg80211 484040 0
autofs4 38674 1
nfsd 280336 2
zl10353 17835 1
cx88_dvb 34393 0
auth_rpcgss 59338 1 nfsd
cx88_vp3054_i2c 12911 1 cx88_dvb
videobuf_dvb 14092 1 cx88_dvb
nfs_acl 12837 1 nfsd
dvb_core 121659 2 cx88_dvb,videobuf_dvb
gpio_ich 13476 0
ppdev 17671 0
tuner_xc2028 31249 2
nfs 236636 0
tuner 27308 1
lockd 93977 2 nfs,nfsd
snd_hda_codec_realtek 61438 1
sunrpc 284590 6 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
cx88_alsa 18359 0
cx8802 18972 1 cx88_dvb
cx8800 37892 0
snd_hda_intel 52355 1
cx88xx 88508 4 cx88_dvb,cx88_alsa,cx8800,cx8802
vt6656_stage 193637 0
snd_hda_codec 192906 2 snd_hda_codec_realtek,snd_hda_intel
fscache 63988 1 nfs
btcx_risc 13640 4 cx88_alsa,cx8800,cx8802,cx88xx
tveeprom 21216 1 cx88xx
videobuf_dma_sg 19262 5 cx88_dvb,cx88_alsa,cx8800,cx8802,cx88xx
rc_core 28124 3 lirc_dev,ir_lirc_codec,cx88xx
snd_hwdep 13602 1 snd_hda_codec
v4l2_common 15681 3 tuner,cx8800,cx88xx
snd_pcm 102099 3 cx88_alsa,snd_hda_codec,snd_hda_intel
videobuf_core 26023 5 videobuf_dma_sg,videobuf_dvb,cx8800,cx8802,cx88xx
videodev 134688 5 tuner,cx88_alsa,cx8800,cx88xx,v4l2_common
snd_page_alloc 18710 2 snd_pcm,snd_hda_intel
snd_seq_midi 13324 0
snd_seq_midi_event 14899 1 snd_seq_midi
snd_rawmidi 30144 1 snd_seq_midi
snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi
lpc_ich 21080 0
dm_multipath 22873 0
snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi
scsi_dh 14882 1 dm_multipath
snd_timer 29482 2 snd_pcm,snd_seq
serio_raw 13462 0
snd 69238 13 snd_hda_codec_realtek,cx88_alsa,snd_hwdep,snd_timer,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
soundcore 12680 1 snd
mac_hid 13205 0
parport_pc 32701 1
lp 17759 0
parport 42348 3 lp,ppdev,parport_pc
coretemp 13435 0
btrfs 835954 0
xor 21411 1 btrfs
raid6_pq 97812 1 btrfs
libcrc32c 12644 2 xfs,btrfs
dm_mirror 22135 0
dm_region_hash 20862 1 dm_mirror
dm_log 18411 2 dm_region_hash,dm_mirror
hid_generic 12548 0
usbhid 52570 0
hid 106148 2 hid_generic,usbhid
usb_storage 62209 1
i915 783703 3
r8169 67581 0
mii 13934 1 r8169
video 19476 1 i915
i2c_algo_bit 13413 3 i915,cx88_vp3054_i2c,cx88xx
drm_kms_helper 53081 1 i915
drm 303102 4 i915,drm_kms_helper
3º Now I'm going to spain xbmc tutorial to tune (http://xbmcspain.com/foro/topic-t72.html), we perform the "Main Setup" and reached the channel search miss it:
sudo apt-get install dvb-utils
[sudo] password for vicent:
Reading package lists ... Done
Building dependency tree
Reading state information ... Done
The dvb-utils package is not available but referred to by another package
him. This may mean that the package is missing, has been obsoleted, or is only
available from any other source
However, the following packages replace it:
dvb-apps: dvb-apps i386
Install dvb-apps and scan...
ls -lR /dev/dvb
/dev/dvb:
total 0
drwxr-xr-x 2 root root 120 Jul 3 13:01 adapter0
/dev/dvb/adapter0:
total 0
crw-rw----+ 1 root video 212, 1 Jul 3 13:01 demux0
crw-rw----+ 1 root video 212, 2 Jul 3 13:01 dvr0
crw-rw----+ 1 root video 212, 0 Jul 3 13:01 frontend0
crw-rw----+ 1 root video 212, 3 Jul 3 13:01 net0
scan /usr/share/dvb/dvb-t/es-Valencia | tee channels.conf
Code:
scanning /usr/share/dvb/dvb-t/es-Valencia
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 490000000 0 2 9 3 1 3 0
initial transponder 746000000 0 2 9 3 1 3 0
initial transponder 762000000 0 2 9 3 1 3 0
initial transponder 770000000 0 2 9 3 1 3 0
initial transponder 834000000 0 2 9 3 1 3 0
initial transponder 842000000 0 2 9 3 1 3 0
initial transponder 850000000 0 2 9 3 1 3 0
initial transponder 858000000 0 2 9 3 1 3 0
>>> tune to: 490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 490000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 746000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 746000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 762000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 762000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 770000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 770000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 834000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 834000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 842000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 842000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 850000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 850000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to: 858000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 858000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_4:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
if I try w_scan
Code:
sudo w_scan -ft -c ES
[sudo] password for vicent:
w_scan version 20130331 (compiled for DVB API 5.10)
using settings for SPAIN
DVB aerial
DVB-T Europe
scan type TERRESTRIAL, channellist 4
output format vdr-2.0
WARNING: could not guess your codepage. Falling back to 'UTF-8'
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> TERRESTRIAL "Zarlink ZL10353 DVB-T": good :-)
Using TERRESTRIAL frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.a
frontend 'Zarlink ZL10353 DVB-T' supports
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
FREQ (174.00MHz ... 862.00MHz)
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Scanning 7MHz frequencies...
177500: (time: 00:00)
184500: (time: 00:21)
191500: (time: 00:43)
198500: (time: 01:04)
205500: (time: 01:25)
212500: (time: 01:47)
219500: (time: 02:08)
226500: (time: 02:29)
Scanning 8MHz frequencies...
474000: (time: 02:51)
482000: (time: 03:12)
490000: (time: 03:33)
498000: (time: 03:55)
506000: (time: 04:16)
514000: (time: 04:37)
522000: (time: 04:59)
530000: (time: 05:20)
538000: (time: 05:42)
546000: (time: 06:03)
554000: (time: 06:24)
562000: (time: 06:46)
570000: (time: 07:07)
578000: (time: 07:29)
586000: (time: 07:50)
594000: (time: 08:11)
602000: (time: 08:33)
610000: (time: 08:54)
618000: (time: 09:15)
626000: (time: 09:37)
634000: (time: 09:58)
642000: (time: 10:20)
650000: (time: 10:41)
658000: (time: 11:02)
666000: (time: 11:24)
674000: (time: 11:45)
682000: (time: 12:06)
690000: (time: 12:28)
698000: (time: 12:49)
706000: (time: 13:10)
714000: (time: 13:32)
722000: (time: 13:53)
730000: (time: 14:14)
738000: (time: 14:36)
746000: (time: 14:57)
754000: (time: 15:18)
762000: (time: 15:40)
770000: (time: 16:01)
778000: (time: 16:23)
786000: (time: 16:44)
794000: (time: 17:05)
802000: (time: 17:27)
810000: (time: 17:48)
818000: (time: 18:09)
826000: (time: 18:31)
834000: (time: 18:52)
842000: (time: 19:13)
850000: (time: 19:35)
858000: (time: 19:56)
ERROR: Sorry - i couldn't get any working frequency/transponder
Nothing to scan!!