2014-07-27, 23:35
Just wanting to have another pair of eyes glance over to see if im missing anything obvious with this setup.
Case: http://www.overclockers.co.uk/showproduc...catid=2282
PSU: http://www.mini-box.com/picoPSU-150-XT-1...-Power-Kit
MB: http://www.ebuyer.com/522964-asrock-z87e...pg0-a0uayz
CPU: http://www.ebuyer.com/538169-intel-core-...646i34130t
RAM: http://www.ebuyer.com/408615-crucial-4gb...9es2lx0ceu
SSD: http://www.ebuyer.com/411671-kingston-60...00s37a-60g
All media is held on a NAS
In the Future i'll likely add http://www.overclockers.co.uk/showproduc...=CA-033-SR
I plan to run XBMCBuntu on it all. I'm yet to look into drivers, can someone advise?
The CPU is a 35W TDP so it should run cool.
Any Comments would be great, am i missing anything i might want in the future?
I have thought about at some time adding the IR Remote http://www.overclockers.co.uk/showproduc...=CA-017-SR
Can this be done cheaper and still get perfect performance from XBMC, (it will only be an XBMC machine
UPDATE: Well I went for it all as the best solution, however didn't notice i needed http://www.streacom.com/products/mh1-min...heatpipes/ The MH1 short heat pipes as the processor is set to the side of the case. Should have read this more carefully http://www.streacom.com/system-build-guide/
Case: http://www.overclockers.co.uk/showproduc...catid=2282
PSU: http://www.mini-box.com/picoPSU-150-XT-1...-Power-Kit
MB: http://www.ebuyer.com/522964-asrock-z87e...pg0-a0uayz
CPU: http://www.ebuyer.com/538169-intel-core-...646i34130t
RAM: http://www.ebuyer.com/408615-crucial-4gb...9es2lx0ceu
SSD: http://www.ebuyer.com/411671-kingston-60...00s37a-60g
All media is held on a NAS
In the Future i'll likely add http://www.overclockers.co.uk/showproduc...=CA-033-SR
I plan to run XBMCBuntu on it all. I'm yet to look into drivers, can someone advise?
The CPU is a 35W TDP so it should run cool.
Any Comments would be great, am i missing anything i might want in the future?
I have thought about at some time adding the IR Remote http://www.overclockers.co.uk/showproduc...=CA-017-SR
Can this be done cheaper and still get perfect performance from XBMC, (it will only be an XBMC machine
UPDATE: Well I went for it all as the best solution, however didn't notice i needed http://www.streacom.com/products/mh1-min...heatpipes/ The MH1 short heat pipes as the processor is set to the side of the case. Should have read this more carefully http://www.streacom.com/system-build-guide/