Android ATV1200 Won't turn on
#1
Hi all.

So I own a re branded ATV1200 and I decided to flash it with linux recently.

Problem is that while in the middle of the no signal bit, the power in our house went out.

Now it wont boot at all. The light on the far left stays orange and all you can do is hold the power button in to turn the light off completely.

I've tried multiple times to do the same process but the TV doesn't detect the box 2,5+ minutes afterwards.

Obviously I've bricked the thing, but finding a solution so far has been impossible.

Anyone have any suggestions?

Cheers.
Reply
#2
Just to clarify I have figured out the solution to my problem:

You need to download and extract the following
http://www.sendspace.com/file/kr3wta

Run the sdflashcard.exe with administrator permissions, in the drop down select you SD card, tick the box and hit the button, format the card, then hit the ok button twice!
Download and extract this to the sd card
http://www.geniatech.com/down-eng/androi...Box4.1.zip

Put the SD card in and power on the ATV...
This should then boot android, once it has done this. Power off the ATV. Hold down the upgrade button and power up, hold the upgrade button for 5 seconds then release. It will now install android to the ATV. This is all output via serial and HDMI.
Reply

Logout Mark Read Team Forum Stats Members Help
ATV1200 Won't turn on0