2015-03-04, 01:00
Hi,
When syncing screen to movie fps (23.976) I have this problem. The movie starts playing, so far so good, BUT when I press stop and it should sync back to 60hz, the HDMI handshake goes bananas and I'm left with a blue screen (no input). I'm using openelec 5.0.5 on an RPI 2 connected to an Onkyo 616. Only way to fix it is switching inputs on the receiver back and forth so it redo the handshake.
I've tried to delay the handshake with the pause option when changing refreshrate, but it only seems to be pausing when starting to play, not when going back to the menu.
I've used a windowsbased HTPC with mediaportal for the last 5 years without any of these problems, and the last years with the same Onkyo receiver.
Are there any known bug or fix for this issue?
Thanks!
Update1: It seems after it has done a refreshrate change from 60 or 50 hz down to 23.396 it can't go back up by trying to change through the menu interface. Highest it can go back up to is 30hz without manually reloading the input on the receiver. Very strange I must say, when using the same input on the receiver with the windows htpc with mediaportal it switches back and forth without any problems (using an ati card in that one).
Update2: Now I tried setting the menu interface refreshrate to 1080p/30hz, now it switches fine to 23.976hz and reverts fine back to 30hz, but if I try to change it from 30 to 60 in the settings menu it won't work without manually reloading the input on the receiver. BUT if I instead start a youtube video the refreshrate changes from 30hz to 60hz duing the video playback and reverts back down to 30hz afterwards.
Can someone explain this? Somehow is the refreshrate change when starting a youtube video different from changing the refreshrate in the settingsmenu. A bug that effects just certain setups?
When syncing screen to movie fps (23.976) I have this problem. The movie starts playing, so far so good, BUT when I press stop and it should sync back to 60hz, the HDMI handshake goes bananas and I'm left with a blue screen (no input). I'm using openelec 5.0.5 on an RPI 2 connected to an Onkyo 616. Only way to fix it is switching inputs on the receiver back and forth so it redo the handshake.
I've tried to delay the handshake with the pause option when changing refreshrate, but it only seems to be pausing when starting to play, not when going back to the menu.
I've used a windowsbased HTPC with mediaportal for the last 5 years without any of these problems, and the last years with the same Onkyo receiver.
Are there any known bug or fix for this issue?
Thanks!
Update1: It seems after it has done a refreshrate change from 60 or 50 hz down to 23.396 it can't go back up by trying to change through the menu interface. Highest it can go back up to is 30hz without manually reloading the input on the receiver. Very strange I must say, when using the same input on the receiver with the windows htpc with mediaportal it switches back and forth without any problems (using an ati card in that one).
Update2: Now I tried setting the menu interface refreshrate to 1080p/30hz, now it switches fine to 23.976hz and reverts fine back to 30hz, but if I try to change it from 30 to 60 in the settings menu it won't work without manually reloading the input on the receiver. BUT if I instead start a youtube video the refreshrate changes from 30hz to 60hz duing the video playback and reverts back down to 30hz afterwards.
Can someone explain this? Somehow is the refreshrate change when starting a youtube video different from changing the refreshrate in the settingsmenu. A bug that effects just certain setups?