Posts: 26,215
Joined: Oct 2003
Reputation:
187
yes, this was in xbmp. however, we found it caused too many problems, as users who don't know what they're doing switch it and then find they have no video. this causes support nightmares.
until a way can be done to autoswitch it back reliably, we won't implement any eeprom writing stuff - it's far too problematic.
Posts: 483
Joined: Mar 2004
Reputation:
0
what about that patch code from cherry that unleashx and nexgen are using?
Posts: 761
Joined: Dec 2003
Reputation:
0
Butcher
Retired Developer
Posts: 761
not much point really - if you want proper 25/30 fps support and your tv can do both pal and ntsc then you could just run pal with pal60 enabled and get the same effect.
Posts: 14
Joined: Mar 2004
Reputation:
0
seism
Junior Member
Posts: 14
hi
not sure how many of you switch between pal and ntsc mode but when you do you have to reset the user interface resolution each time.
my request is to suggest a setting for both pal and ntsc on user interface->resolution screen (as build 2004-06-03). so when rebooting you get the region setting automatically. or, so as not to change the skin, just have a place in settings.xml for each regions resolution.
i use enigmah to change region - maybe xmbc could do this also, but i guess this would require a skin change.
thanks
seism
Posts: 1
Joined: Jun 2004
Reputation:
0
i too have precisely the same annoyance and would love to see a feature like this :kickass:
Posts: 17
Joined: Sep 2004
Reputation:
0
can we put in the xbmc access to the video parameters that can easily be adjusted as in avalaunch's setting. these are very use full w/ eprom write back func. all in one spot.
Posts: 26,215
Joined: Oct 2003
Reputation:
187
adding writing to the eeprom for video preferences will be added after 1.1 is out. turning the widescreen/hdtv flags will definitely be added. not sure if we're going to allow ntsc/pal switching or not - too many problems with ntsc people creating "no video output" problems.
Posts: 4
Joined: Oct 2004
Reputation:
0
when i go into my settings, it is not allowing me to change my resolution from ntsc to anything else.... anyone have ideas?
-mickelonis
Posts: 4
Joined: Oct 2004
Reputation:
0
hrm.... not really sure how else to explain it....
from my main screen, i go to the settings menu, then interface, then where you can adjust the resolution, i should be able to select different resolutions, but it is stuck on ntsc, there are no other options...
-mickelonis
Posts: 383
Joined: Oct 2003
Reputation:
0
floink
Senior Member
Posts: 383
just a thought about the failsafe problem and support nightmares (or maybe this is included in jmarhalls "reliable" autoswitch?) but couldnt a similar method to the ms windows way of doing it be used. if user swithces to another system a dialog is presented stating something like:"you have switched to pal. if you want to keep it like this select yes otherwise xbmc will switch back to ntsc automaticallly in 10(, 9, 8, 7 and so on) seconds."? if users tv don't support it the dialog will never be seen and the xbox is reset.
Posts: 5,008
Joined: Sep 2003
Reputation:
30
pike
Team Kodi Admin
Posts: 5,008
:p thats how we (or jmarshall) is planning on inplementing it