Ultimately, I think the problem stems from the fact that I am using Openmediavault (which is based upon Debian Jessie).
According to this, the latest version of XMLTV is 0.5.63.2 (
https://packages.debian.org/jessie/interpreters/xmltv).
However, I need version 0.5.69-1, to use the tv_grab_zz_sdjson grabber for Schedules Direct.
I worked out that I needed to compile the latest version of 0.5.69-1 myself, having read the relevant readme file:
XMLTV 0.5.69
Gather television listings, process them and organize your viewing.
XMLTV is a file format for storing TV listings, defined in xmltv.dtd.
Then there are several tools to produce and process these listings.
Please see doc/QuickStart for documentation on what each program does,
and xmltv.dtd for documentation on the file format.
* Major Changes in this release (0.5.69)
tv_grab_hr - removed broken grabber
tv_grab_pt - removed broken grabber
tv_grab_uk_atlas - removed due to new target site rules
tv_grab_fi - major changes, need to run configure again
tv_grab_sd_json/tv_grab_zz_sdjson - major speed improvements.
This grabber is replicated as tv_grab_zz_sdjson and will
only be available via the new name in the next release.
Please switch to the new name.
tv_grab_zz_sdjson_sqlite - additional grabber for Schedule
Direct's fee-based SD-JSON service. Supports 50+
countries. http://www.schedulesdirect.org/regions
And lots of other changes (see ChangeLog for details)
* Installation
Note: Windows users are strongly advised to use the pre-built EXE as installing
all the prerequisites is non-trivial. For those who want to give it a go,
instructions are in doc/exe_build.html. Those instructions can be used for both
building xmltv.exe as well as a local install.
Basic installation instructions (Linux/Unix):
% perl Makefile.PL
% make
% make test
% make install
To install in a custom directory, replace the first line with
something like
% perl Makefile.PL PREFIX=/wherever/
The system requirements are Perl 5.6 or later, and a few Perl modules.
You will be asked about some optional components; if you choose not to
install them then there are fewer dependencies. The full list of
required modules is:
LWP 5.65
XML:arser 2.34
XML::Twig 3.10
XML::Writer 0.4.6
Date::Manip 5.42a
Memoize (included with Perl 5.8 and later)
Storable (included with Perl 5.8 and later)
Archive::Zip (if you want to run tv_grab_uk_bleb)
CGI (if you want to run tv_pick_cgi)
Compress::Zlib (if you want to run tv_grab_se_swedb)
Data:umper (if you want to run tv_grab_dk_dr)
DateTime (if you want to run tv_grab_dk_dr)
HTML:arser 3.34 (for grabbers which use HTML::Entities)
HTML::TableExtract (if you want to run tv_grab_na_icons)
HTML::TreeBuilder (for many of the grabbers)
HTTP::Cache::Transparent (for several of the grabbers)
HTTP::Cookies (if you want to run tv_grab_br_net)
IO::File (if you want to run tv_grab_fr)
IO::Scalar (if you want to run tv_grab_uk_bleb, tv_grab_in)
IO::Stringy (if you want to run tv_grab_se_swedb)
JSON (if you want to run tv_grab_fi)
Parse::RecDescent (if you want to run tv_grab_dk_dr)
SOAP::Lite (if you want to run tv_grab_na_dd)
Term::ReadKey (if you want to run tv_grab_na_dd)
Text::Kakasi (if you want to run tv_grab_jp)
Tk (if you want to run tv_check)
Tk::TableMatrix (if you want to run tv_check)
WWW::Mechanize (if you want to run tv_grab_na_icons, tv_grab_br_net)
XML::LibXML (if you want to run tv_grab_se_swedb, tv_grab_in)
Unicode::UTF8simple (if you want to run tv_grab_pt)
You may have difficulty with the XML modules on Perl 5.8.0 - if so
send mail to the xmltv-users list. Other Perl versions should be OK.
The following modules are recommended, but the software still works
without them:
Term:rogressBar (displays pretty progress meters)
PerlIO::gzip (for perl 5.8+) (makes tv_imdb a bit faster)
Lingua:referred 0.2.4 (helps with multilingual listings)
Unicode::String (non-ASCII chars in LaTeX output)
Lingua::EN::Numbers::Ordinate (not really needed, to be honest)
And the Log::TraceMessages module is useful for debugging, but not
needed for normal use.
All of these can be installed with tarballs downloaded from CPAN or
(hopefully) using the CPAN shell program: 'perl -MCPAN -e shell', then
'install XML::Twig' and so on. But you may find it easier to search
for packaged versions from your OS vendor or others - places which
distribute a packaged version of XMLTV will often provide the modules
it needs too.
* Proxy servers
Proxy server support is provide by the LWP modules.
You can define a proxy server via the HTTP_PROXY enviornment variable.
http_proxy=http://somehost.somedomain:port
For more information, see the the following:
http://search.cpan.org/~gaas/libwww-perl...erAgent.pm#$ua->env_proxy
* Known issues
tv_grab_se_swedb sometimes fails to work on Windows if there are spaces
in the path to your home-directory. This can be avoided by setting
the environment variable HOME to a path without spaces (e.g. c:\home).
* Author and copying
This is free software distributed under the GPL, see COPYING. But if
you would like to use the code under some other conditions, please do
ask. There are many who have contributed code, they are credited in
individual source files.
There is a web page at http://www.xmltv.org and a Sourceforge
project 'XMLTV'. There are some mailing lists:
[email protected]
[email protected]
[email protected]
You ought to subscribe to the announce list at least. Contact the
users list with most problems.
-- Robert Eden, [email protected], 2017-01-23
$Id: README,v 1.181 2017/01/24 04:59:45 rmeden Exp $
Every time I try to make the file, there seems to be something missing.
Here is what I have got, so far, having connected to Openmediavault via Putty:
Code:
sudo apt-get install libxml-treepp-perl
Code:
sudo apt-get install bzip2
Code:
sudo wget
https://sourceforge.net/projects/xmltv/f...69.tar.bz2
Code:
tar xvf xmltv-0.5.69.tar.bz2
Code:
cd xmltv-0.5.69/
Code:
root@openmediavault:~/xmltv-0.5.69# perl Makefile.PL
Can't locate Term/ReadKey.pm in @INC (you may need to install the Term::ReadKey module) (@INC contains: /etc/perl /usr/local/lib/x86_64-linux-gnu/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/x86_64-linux-gnu/perl5/5.20 /usr/share/perl5 /usr/lib/x86_64-linux-gnu/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl .) at lib/Ask/Term.pm line 9.
BEGIN failed--compilation aborted at lib/Ask/Term.pm line 9.
Compilation failed in require at Makefile.PL line 254.
Code:
apt-get install libterm-readkey-perl
Code:
make
https://tvheadend.org/attachments/downlo...-18-48.png
I then did the following:
Code:
cpan XML::Twig
which seemed to install various things (after typing "y" about four times) but then if I try and "make" again, it just keeps on telling me that XML:Twig is missing.
I am so out of my depth here that I thought that I should just try something else, like mc2xml.
I am such a Linux novice that it is more than likely that I am doing something completely wrong - I just blindly copying and pasting bits of code that I am getting from forums and webpages, without really understanding why.